New Hope LED Lights

[Idlogin]

Here are photos and descriptions of the new range of Hope LED lights.

All the new lights use Seoul P4 emitters, are CNC machined, offer regulated light output, have four power levels and a flashing mode.

First up is the Vision 1 LED

• £79
• 240 Lumens
• Burn time 2hrs 45min's to 36hrs+ on low
• Uses 4 AA batteries
• +/-4 degrees beam angle
• 3.5watts max output
• 110g
• Offered in four colours

http://www.flickr.com/photos/22689020@N05/2226810948/

Next up is Vision 2 LED

• £195
• 480 Lumens ( up from the previous version)
• Burn time 2hrs to 35 hrs on low
• Comes with softpack 2 cell PVC battery 2400mAh and smart charger
• Endurance pack of two 2 cell batteries or a 4 cell epic pack offered
• Uses two spot beams +/- 6 degrees
• 7 watts max output
• 280g
• Thermally managed

http://www.flickr.com/photos/22689020@N05/2226019495/

Lastly is the Vision 4 LED

• £299
• 960 Lumens
• Burn time 2hrs 15 mins to 35hrs on low
• Comes with softpack 4 cell PVC battery 520mAh an d smart charger
• endurance pack of two 4 cell batteries offered
• Uses one spot beam and three flood beams +/- 15 degrees
• 14watts max output
• 415g
• Thermally managed

http://www.flickr.com/photos/22689020@N05/2226825174/

The 4 LED light has a dimpled front lens which diffuses the light so that there is no real hot spot or any dark patches, this has been specially made for Hope.
http://www.flickr.com/photos/22689020@N05/2226049219/

The 2 and 4 LED use the case as a heat sink.

The great thing about these lights is that Hope are very forward thinking, as new technology becomes available you will be able to send light back to Hope and they will upgrade it for you with the latest emitters/bins etc (or you can mod it yourself of course).:twothumbs

I've only seen beam shots of these lights, the 4 LED looks to be better than the Lupine Wilma 4 and very close to the Betty 6. The spread of light is more even than these lights as well.

Below are some other photos.
http://www.flickr.com/photos/22689020@N05/2226829348/
http://www.flickr.com/photos/22689020@N05/2226021789/
http://www.flickr.com/photos/22689020@N05/2226808402/
http://www.flickr.com/photos/22689020@N05/2226806870/
http://www.flickr.com/photos/22689020@N05/2226015347/

 

[Gunner12]

:welcome:

Looks like a good product. I don't ride much(especially not at night), but I bet many people will be interested.

P.S. cross posting isn't allowed.

 

[Sigman]

...P.S. cross posting isn't allowed.

Ditto, offending post deleted.

 

[tenbears10]

Nice lights and a good price for the vision 1. They do look a bit bulky on the bars what with the battery and the light all strapped round the stem. It will be good to see some beamshots of them as well

 

[tenbears10]

I've only seen beam shots of these lights, the 4 LED looks to be better than the Lupine Wilma 4 and very close to the Betty 6. The spread of light is more even than these lights as well.

It would be good to see comparisons because the Betty is listed as 1400 lumens or 22 watts which is quite a bit more than the Hope. The 6 or 12 versions sold only denotes runtime not a difference in brightness. The new Wilma is 830 lumens and 15 watts and comes in 4, 6 or 8 which is again runtime, this sounds pretty similar to the Hope Vision 4 to me. :thinking: