[*=left]Emitter: Single LEDs on a copper DTP MCPCB e.g.
[*=left]Luminus SBT-90 LED
[*=left]Optic: Aluminum smooth reflector
[*=left]Lens: Glass with anti-reflective coating
[*=left]Flux: ~6500 lm
[*=left]Intensity: ~163,800 cd ANSI throw ~810 m
[*=left]Firmware: The X9L uses free software called Andúril, distributed under the terms of the GPL v3. Code is available from http://tiny.cc/TKAnduril
[*=left] By default the X9L is set to use SMOOTH RAMPING. Instant access to TURBO mode is also provided.
[*=left] A more conventional STEPPED RAMPING UI is available if you like discrete modes level. You can choose how many steps you want.
[*=left] MOMENTARY mode is useful for signaling purposes or rapidly/briefly lighting up targets. To exit this mode, physically disconnect power
[*=left] MUGGLE mode uses a reduced output.
[*=left] It has an electronic LOCKOUT for safety, but acts also as momentary low light.Other functions: Battery check, sunset, beacon, tactical strobe, party strobe, bike flasher, candlelight, lightning storm
[*=left]Battery: One flat-top or button-top 21700 cell. An unprotected cell is recommended.
[*=left]Max. length 70.5 mm. Cell is not included.
[*=left]Driver: FET+7+1 driver. Low parasitic drain while OFF
[*=left]Body: Aluminum with hard-coat anodizing
[*=left]Switch: Electronic tail switch
[*=left]Ingress rating: Equivalent to IPX7
[*=left]Weight: Approximately 126.3 g without cells
[*=left]Size: 40 mm Ø head x 123.6 mm length x 25.2mm tube