scout24
Flashaholic
Re: New Pics And Member List Added "Chimera Mini" A "Flat" Edc with Built-in Usb Char
Perhaps March of the Valkyries?
Perhaps March of the Valkyries?
New Pics And Member List Added "Chimera Mini" A "Flat" Edc with Built-in Usb Charging
- Thread starter Sabrewolf
- Start date
Help Support Candle Power Flashlight Forum
dom
Enlightened
Re: New Pics And Member List Added "Chimera Mini" A "Flat" Edc with Built-in Usb Char
I think you'll have to rename this to
The Tardis
Cheers
Dom
I think you'll have to rename this to
The Tardis
Cheers
Dom
Sabrewolf
Flashlight Enthusiast
Re: New Pics And Member List Added "Chimera Mini" A "Flat" Edc with Built-in Usb Char
Sweet! Then we can make it takes us to different worlds!
I will be getting the Gen 3 Ti tomorrow or monday 🙂
It is the same overall dimensions as the Handmade
awoominum version
And alot lighter than the Gen 1 Ti.
5.5oz Vs 3.2oz or about the same as a small cellphone
Peanut Butta Jelly Time!
Sweet! Then we can make it takes us to different worlds!
I will be getting the Gen 3 Ti tomorrow or monday 🙂
It is the same overall dimensions as the Handmade
awoominum version
And alot lighter than the Gen 1 Ti.5.5oz Vs 3.2oz or about the same as a small cellphone
Peanut Butta Jelly Time!
Sabrewolf
Flashlight Enthusiast
Re: New Pics And Member List Added "Chimera Mini" A "Flat" Edc with Built-in Usb Char
I revamped the first post for more options and details :twothumbs
I revamped the first post for more options and details :twothumbs
scout24
Flashaholic
Re: New Pics And Member List Added "Chimera Mini" A "Flat" Edc with Built-in Usb Char
Looking better all the time, Sabrewolf! can't wait to see pics of the latest gen 3! Keep up the good work. Thank you for all the updates.
Greg
Looking better all the time, Sabrewolf! can't wait to see pics of the latest gen 3! Keep up the good work. Thank you for all the updates.
Greg
Sabrewolf
Flashlight Enthusiast
Re: New Pics And Member List Added "Chimera Mini" A "Flat" Edc with Built-in Usb Char
Gen 3 is in! First post
Gen 3 is in! First post
scout24
Flashaholic
Re: New Pics And Member List Added "Chimera Mini" A "Flat" Edc with Built-in Usb Char
Gen III::twothumbs
Okay, that's probably overkill on the smiles... I was quietly hoping you would be able to get back to the smaller size of your Al prototype, very glad it was not only possible, but that you deemed it so...
Gen III::twothumbs
Okay, that's probably overkill on the smiles... I was quietly hoping you would be able to get back to the smaller size of your Al prototype, very glad it was not only possible, but that you deemed it so...
MWClint
Enlightened
Re: New Pics And Member List Added "Chimera Mini" A "Flat" Edc with Built-in Usb Char
Sabrewolf, you are awesome!
Sabrewolf, you are awesome!
Re: New Pics And Member List Added "Chimera Mini" A "Flat" Edc with Built-in Usb Char
Wow, this keeps getting better all the time. :twothumbs
I really like the mini-sd card reader. Allows us to upgrade the storage.
I need to make sure I keep the funds in my PP.
Wow, this keeps getting better all the time. :twothumbs
I really like the mini-sd card reader. Allows us to upgrade the storage.
I need to make sure I keep the funds in my PP.
csshih
Flashlight Enthusiast
Re: New Pics And Member List Added "Chimera Mini" A "Flat" Edc with Built-in Usb Char
oohhhh. snaaaapp!!1(one) 😵
impressive~!
oohhhh. snaaaapp!!1(one) 😵
impressive~!
Sabrewolf
Flashlight Enthusiast
Re: New Pics And Member List Added "Chimera Mini" A "Flat" Edc with Built-in Usb Char
Sales will be starting up soon! I may have to raise the price to about
425$ to cover the costs. I hope that doesnt put the kabash on the sales :mecry:
Sales will be starting up soon! I may have to raise the price to about
425$ to cover the costs. I hope that doesnt put the kabash on the sales :mecry:
Last edited:
brighterisbetter
Flashlight Enthusiast
Re: New Pics And Member List Added "Chimera Mini" A "Flat" Edc with Built-in Usb Char
Oh man that's great news
At this very moment, I'm a bit
but am still interested. Should the sales thread go in order of the interested list prioritywise, then I'm about perfect position, cause right now I don't have the $$ but give me a few weeks to accumulate/save/selloff and I should be about there, then it's instead of just
Oh man that's great news
At this very moment, I'm a bit
but am still interested. Should the sales thread go in order of the interested list prioritywise, then I'm about perfect position, cause right now I don't have the $$ but give me a few weeks to accumulate/save/selloff and I should be about there, then it's instead of just
MWClint
Enlightened
Re: New Pics And Member List Added "Chimera Mini" A "Flat" Edc with Built-in Usb Char
Same here. I've got half $ right now, and definitly not going to pass this up this light. I'll sell a kidney..anyone need one? 😗 bueller... bueller....
😀
Oh man that's great news
At this very moment, I'm a bit
Same here. I've got half $ right now, and definitly not going to pass this up this light. I'll sell a kidney..anyone need one? 😗 bueller... bueller....
😀
Re: New Pics And Member List Added "Chimera Mini" A "Flat" Edc with Built-in Usb Char
I'm still in, but want the money clip also, wondering about total cost...
I'm still in, but want the money clip also, wondering about total cost...
scout24
Flashaholic
Re: New Pics And Member List Added "Chimera Mini" A "Flat" Edc with Built-in Usb Char
+1 on the moneyclip question?
+1 on the moneyclip question?
Sabrewolf
Flashlight Enthusiast
Re: New Pics And Member List Added "Chimera Mini" A "Flat" Edc with Built-in Usb Char
I found a nice Brushed Ti money clip that may work
Due to the complexities of an innocent looking clip with all the
curves and contours, I may have to buy it from retail. here is one
that you may find interesting:
http://www.amazon.com/dp/B0015G7YJS/?tag=cpf0b6-20
Its a pretty thick Ti too
Its possible that i could make something myself. But i need to do some more
experimentation on what type of Ti is best for a clip. The one that is
on my proto is aVERY thin, and if pulled back to far, It won't snap back.
I gave it to my cousin to play with... And the first thing he did was bend
out the clip :devil:
I found a nice Brushed Ti money clip that may work
Due to the complexities of an innocent looking clip with all the
curves and contours, I may have to buy it from retail. here is one
that you may find interesting:
http://www.amazon.com/dp/B0015G7YJS/?tag=cpf0b6-20
Its a pretty thick Ti too
Its possible that i could make something myself. But i need to do some more
experimentation on what type of Ti is best for a clip. The one that is
on my proto is aVERY thin, and if pulled back to far, It won't snap back.
I gave it to my cousin to play with... And the first thing he did was bend
out the clip :devil:
Re: New Pics And Member List Added "Chimera Mini" A "Flat" Edc with Built-in Usb Char
My preference for money clip would be one that was screwed on (where screws are accessible).
I use a money clip on my billfold and they only last a few months, and then they stretch open.
If it was designed where the light is the back of the clip then you could unscrew it, bend it a little, and you would be back in business.
The other thought is having a slot in the light (don't think I like this), and the straight part of the clip slides into that. THat is what my current billfold is like.
Neale
My preference for money clip would be one that was screwed on (where screws are accessible).
I use a money clip on my billfold and they only last a few months, and then they stretch open.
If it was designed where the light is the back of the clip then you could unscrew it, bend it a little, and you would be back in business.
The other thought is having a slot in the light (don't think I like this), and the straight part of the clip slides into that. THat is what my current billfold is like.
Neale
iconoclast
Enlightened
- Joined
- Sep 11, 2007
- Messages
- 207
Re: New Pics And Member List Added "Chimera Mini" A "Flat" Edc with Built-in Usb Char
This just keeps getting better all the time.
At first I thought the data storage option was just silly, but after thinking on it awhile and knowing that you'll be using a usb port to charge the thing anyway... the idea kinda grows on you after awhile. The card slot variant make a lot of sense, as then it's upgradable and only your led will be obsolete after a few weeks. 😉
I'm curious to see how the other options flesh out. Are any of them mutually exclusive? Does the Pontiaker artwork displace the tritium slots? Does the money clip get in the way of the tripod mount? Who's arranging the group-buy AlTiN coating? What does the price look like if you select "all of the above" in the extra options section?
I know these can't be answered quite yet as much of this is still being worked out. But every time I come back to check on this thread it's looking even better than before, so I'm antsy to see how the rest is going to unfold.
It's certainly the most unique light I've seen so far around here.
This just keeps getting better all the time.
At first I thought the data storage option was just silly, but after thinking on it awhile and knowing that you'll be using a usb port to charge the thing anyway... the idea kinda grows on you after awhile. The card slot variant make a lot of sense, as then it's upgradable and only your led will be obsolete after a few weeks. 😉
I'm curious to see how the other options flesh out. Are any of them mutually exclusive? Does the Pontiaker artwork displace the tritium slots? Does the money clip get in the way of the tripod mount? Who's arranging the group-buy AlTiN coating? What does the price look like if you select "all of the above" in the extra options section?
I know these can't be answered quite yet as much of this is still being worked out. But every time I come back to check on this thread it's looking even better than before, so I'm antsy to see how the rest is going to unfold.
It's certainly the most unique light I've seen so far around here.
Stillphoto
Flashlight Enthusiast
Re: New Pics And Member List Added "Chimera Mini" A "Flat" Edc with Built-in Usb Char
Well to answer one part of your question, artwork done by Pontiaker would be a whole separate thing...And would be as expansive as you and Matt decide on.
Considering where the trit slots could be placed (up front right?), I don't see it interfering with much.
Well to answer one part of your question, artwork done by Pontiaker would be a whole separate thing...And would be as expansive as you and Matt decide on.
Considering where the trit slots could be placed (up front right?), I don't see it interfering with much.
Sabrewolf
Flashlight Enthusiast
Re: New Pics And Member List Added "Chimera Mini" A "Flat" Edc with Built-in Usb Char
The trit slots can be wherever you want 🙂
In the front on either side of the lense, on the
back end, top cover, bottom, sides... possibilties
are only up to your imagination. I don't have
a "Set" location. But i do have the milling cutters
for just that purpose.. and 2 cupfuls of Norland
optical adhesive to pull it off.. And that means
i dont have to send it to the machinist
The money clip will be screwed-in, and the screws
wil be accessable by you. If you guys/gals have a
better clip that you would like me to use, Then let
me know As the one i posted was just an idea.
As for the 1/4-20 Camera mount. It will be
tapped in the corner from the bottom close
to the lanyard hole. So yes, it will be off-center.
I prob won't do a coating.. But i have another finish
that can be done for less money. It has an antique
patina look to it. And is pretty durable. If you carry
this light in the same pocket as your keys, It will
pick up some of the brass from them. It looks kinda
"Weathered" and worn-in. Like an old saddle.
This light is made to be beatup, and carry a unique
finish that will vary from person-to person with age.
If you guys really want a coating, Please shoot me
a PM.
The trit slots can be wherever you want 🙂
In the front on either side of the lense, on the
back end, top cover, bottom, sides... possibilties
are only up to your imagination. I don't have
a "Set" location. But i do have the milling cutters
for just that purpose.. and 2 cupfuls of Norland
optical adhesive to pull it off.. And that means
i dont have to send it to the machinist
The money clip will be screwed-in, and the screws
wil be accessable by you. If you guys/gals have a
better clip that you would like me to use, Then let
me know
As the one i posted was just an idea. As for the 1/4-20 Camera mount. It will be
tapped in the corner from the bottom close
to the lanyard hole. So yes, it will be off-center.
I prob won't do a coating.. But i have another finish
that can be done for less money. It has an antique
patina look to it. And is pretty durable. If you carry
this light in the same pocket as your keys, It will
pick up some of the brass from them. It looks kinda
"Weathered" and worn-in. Like an old saddle.
This light is made to be beatup, and carry a unique
finish that will vary from person-to person with age.
If you guys really want a coating, Please shoot me
a PM.
