nightblaster SLA charger info needed

Lynx_Arc

Flashaholic
Joined
Oct 1, 2004
Messages
11,212
Location
Tulsa,OK
I managed to pick up a few headlamps today. All are nightblaster brand and required a little work to get operating properly. I had to repair two of them and the one I was wanting information about is a nightblaster with what looks like a 6v xenon/white LED combo light with a seperate belt mounted 4.5A/hr sla battery with a built in circuit that has a power input. I was given 12v cigarette lighter and 12v 400mah chargers for it but the battery is a 6v cell. I had to repair the circuit, the foil was broken and I *think* it was a voltage regulator circuit of some sort.

Anyone have one of these and can confirm the adapter needed to hook up to the tiny circuit that is on top the SLA in a seperate canvas pouch in the belt pack?

Also I may be able to get more of these headlamps too. I have 3 different types of headlamps as follows I picked up.

1. 4AA cabled mounted on back of headband with 1LED/halogen.
2. 4.5A/hr SLA xenon/LED (optic on LED) with ~3 foot cord belt carrier for battery.
3. 4D belt mounted plastic box 1LED/halogen headlamp.

All of these use 1/8 inch plug on battery cord to 1/8 socket in lower left part of light with switch on right side.

I also picked up a 3AAA cliplight/headlamp with 3 RED leds on it too.
I got a 4th headlamp with 3AAA battery same carrier as above with 2white/1red LED/xenon lamp electronic switch also.

Any information is appreciated.
 
Top