One Celled light collection *pictures*

4sevens

Flashlight Enthusiast
Joined
Feb 29, 2004
Messages
2,876
Location
Atlanta, GA
Hi again everyone,

I had a hay day yesterday with my digicam... Here are some macro
shots of my 1 celled lights. Enjoy... /ubbthreads/images/graemlins/smile.gif

from left to right:
1.Micro-m*g with lambda's minipro and so20xa reflector
2.Arc LSH-P #1866 with jtice's 1aa clicky mirror polished
3.TNC AA 14500 li-ion direct drive two stage
4.Arc AA stock
5.Arc AAA LED_ASAP modded to around 350ma (with 950ma to batt)
6. Arc AAA 10440 li-ion direct drive with lionheart insides v2
7.Arc LSH-P #014 with bare aluminum twisty
8.Arc LS two stage clicky
9.Arc4 tailcap with cy's flat switch mod

knock your self out:
IMG_0305.jpg
IMG_0310.jpg
IMG_0312.jpg
IMG_0315.jpg
IMG_0317.jpg
IMG_0318.jpg
IMG_0321.jpg
IMG_0322.jpg
IMG_0325.jpg


more 3MP pictures HERE

/ubbthreads/images/graemlins/grin.gif

(actually a few missed out on this shooting like the ultra G modded
with LH insides and a few arc aa luxeon mods and also a TNC bead
blasted) /ubbthreads/images/graemlins/smile.gif
 
Nice pics 47. /ubbthreads/images/graemlins/smile.gif

Nice little collection of littles you have there. /ubbthreads/images/graemlins/grin.gif
 
Can I horn in?

aaa1.jpg

Arc LS twisty, Arc LS clickies, and Arc AAs.

aaa2.jpg

Arc AAAs, including white and red LEDs, plus one made on the last day of production (Sept. 20, 2004). One of 'em is a Peak pretending to be an Arc.

aaa3.jpg

Left to right: Q-III, Aleph2 NG500, E1e with McGizmo tail, Old-style white LED Infinity, New-style red LED Infinity.

aaa4.jpg

A couple of these aren't really 1-cell lights, but since they are stuffed with one Pila 168S, I threw 'em in here. Left to right: Aleph 3 DB917 TWOK, Surefire L4 with Z57 clicky, a pair of Inova X1s, an El Cheapo Dorcy, and a Peak 1LED AAA hi-power. I had a Sonic in there, but it apparently was embarrassed and rolled away.

best regards
 
Nice collection 47 and powernoodle.
Thank goodness I dont have that many otherwise my wife will definitely boot me.
 
Modamag -

Once you reach a critical mass, the spousewoman has no way of knowing when you've added another toy. The hard part for me is sneaking one into the house in the first place. Once its inside, I'm groovy. I find USPS is easier than UPS for this reason, because its easier to sneak it in from the mailbox than it is to distract my wife while a big, brown truck idles in the driveway with some guy banging on the door.

best regards
 
Here's some of my single cell collection.

1cells.jpg


Left to Right: 2 x VIP, LionHeart, PR X3T with BE1 and McE2S (15ohm) on R123, Arc LS First Run #1006, Arc4+ Rev2 #1817 on R123, KL4 with Vital Gear FB1 on R123

Missing from the pic are: CPF SE LionHeart #008/125, MiniminiMag with MadMax Lite, d'mo modded Luxeon AAA, Firefly II.
 
[ QUOTE ]
powernoodle said:
Modamag -

Once you reach a critical mass, the spousewoman has no way of knowing when you've added another toy. The hard part for me is sneaking one into the house in the first place. Once its inside, I'm groovy. I find USPS is easier than USP for this reason, because its easier to sneak it in from the mailbox than it is to distract my wife while a big, brown truck idles in the driveway with some guy banging on the door.


[/ QUOTE ]

The "critical mass" theory, I love it !! /ubbthreads/images/graemlins/hahaha.gif /ubbthreads/images/graemlins/crackup.gif /ubbthreads/images/graemlins/nana.gif Another Flashlight ! /ubbthreads/images/graemlins/twakfl.gif /ubbthreads/images/graemlins/whoopin.gif /ubbthreads/images/graemlins/str.gif
 
Here are my 1-AA lights.

1-AAs-c-sm.jpg


Nothing unusual except the HA-III miniminimag on the right.
Also, the Arc has been modded with a LuxIII and a two-level switch.
 
Hey gregw, how is the runtime with the KL4 running on a R123? That looks to be comparable in size to the arc4!
 
Good to see the little guys! Here's mine:

OneCellLights.jpg


Left to right:

N cell lambda "NanoMate" with ArcMania pill and green glow powder/clear epoxy mix around emitter.

Ultra tiny ARC LSPH "Cigar Butt" running on a CR2 cell with reflector conversion. Push for momentary or turn for permanent on/lockout switch. Pure white, round beam with good sidespill. Built by Dan C.

Proto #3 N cell TnC Products "Keylux". Pure white, round beam. Best ArcMania pill I've ever seen!

FireFly Rev. 1 head with BB700 and Q3J emitter running at 700mA, reflector conversion and CR2 body with 2 stage switch. Another pure white, round beam with good sidespill.

Ultra small E1e with old E1 head with ecan/esink, BB500 running at 500mA. Green glow powder/clear epoxy mix around emitter and also used to fill hole and indentation in head where original clip was mounted. Sorry it doesn't show in picture as it's on the other side. With all the glow powder/epoxy mix on this thing you can use it as a light when it is off! /ubbthreads/images/graemlins/smile.gif Original E1 tailcap, (the smallest tailcap SF ever made!), converted to a clickie by YC. Nice floodlight beam. Light built by my good friend Chop.

KL5/E2C/E1e body with McE2S 2 stage switch and running on one of Jon's 4.2V 123R's. PURE white, round beam. KL5 also has a green tritium vial epoxied in slot on head of KL5.
 
[ QUOTE ]
Gene said:
Good to see the little guys! Here's mine:

OneCellLights.jpg


Left to right:

N cell lambda "NanoMate" with ArcMania pill and green glow powder/clear epoxy mix around emitter.

Ultra tiny ARC LSPH "Cigar Butt" running on a CR2 cell with reflector conversion. Push for momentary or turn for permanent on/lockout switch. Pure white, round beam with good sidespill. Built by Dan C.

Proto #3 N cell TnC Products "Keylux". Pure white, round beam. Best ArcMania pill I've ever seen!

FireFly Rev. 1 head with BB700 and Q3J emitter running at 700mA, reflector conversion and CR2 body with 2 stage switch. Another pure white, round beam with good sidespill.

Ultra small E1e with old E1 head with ecan/esink, BB500 running at 500mA. Green glow powder/clear epoxy mix around emitter and also used to fill hole and indentation in head where original clip was mounted. Sorry it doesn't show in picture as it's on the other side. With all the glow powder/epoxy mix on this thing you can use it as a light when it is off! /ubbthreads/images/graemlins/smile.gif Original E1 tailcap, (the smallest tailcap SF ever made!), converted to a clickie by YC. Nice floodlight beam. Light built by my good friend Chop.

KL5/E2C/E1e body with McE2S 2 stage switch and running on one of Jon's 4.2V 123R's. PURE white, round beam. KL5 also has a green tritium vial epoxied in slot on head of KL5.

[/ QUOTE ]
I almost fell off my chair when I saw the one on the far right! /ubbthreads/images/graemlins/eek.gif Good use of E2C! Gotta get one of those some time in the future.
 
Gene,
Nice "cigar butt" /ubbthreads/images/graemlins/drool.gif. I would love to have one of those made. Awsome collection /ubbthreads/images/graemlins/happy14.gif.
 
Ok, I received my Jil CR2 1.3W today and I need to compare it with my smallest Flashlights. Firefli is not a one cell, but it's here to see the difference /ubbthreads/images/graemlins/wink.gif
And I can't post a photo with all my single cell flashlights /ubbthreads/images/graemlins/grin.gif
Left to right :

1)Firefli (bought at JSBurly's Shop )
2)Arc AAA N-cell (Jets22 mod)
3)Larry CR2 II (Infamous Tvodr /ubbthreads/images/graemlins/wink.gif, I haven't the N-cell /ubbthreads/images/graemlins/frown.gif )
4)Arc AA CR2 (Jets22 mod)
5) Ichishiki CR2 (Katokishi)
6) Lambda Kmate mod N-cell (Arcmania Pill)
7) Jil CR2 1.3W
8) N-cell TNC prototype (TNC products)
9) Arc LS mod 3W CR123A (Jets22)
10) Arc AAA CPF special Edition 2002 Js Burlison (Arc Flashlight)
11) Aleph2 1x123 FT tailcap Bead blasted by Endeavour (McGizmo)
small_2.sized.jpg
 

Latest posts

Top