Orphan E2e head - what to do?

alberto

Enlightened
Joined
Nov 15, 2002
Messages
448
Location
Atlanta, GA USA
I replaced the head on my E2e with a KL1 but would like to have the old head/bulb do something other than sit in my desk drawer. Any suggestions? I'd really like to end up with something similar to a E1e.
 

Gene

Flashlight Enthusiast
Joined
Dec 19, 2000
Messages
1,707
Location
Dunsmuir, Ca.
This is a good question because with the KL1 head on my E1, the original E1 head has seen NO use. I've been wondering if I should sell it or whatever because it'll NEVER replace the KL1 head!
wink.gif
 

avusblue

Enlightened
Joined
Nov 26, 2002
Messages
699
Location
Saint Paul, Minnesota
I'm in the same boat. I posted several times seeking to buy an E2 body, but no one ever nibbled.

I think SF should offer bodies and heads separately, for "plug & play" selections.

Either that, or I'm thinking of just buying a second E2e and leaving the P60 in it. That would conform to the "buy both" mantra of CPF . . . "AND, not OR".
 

GJW

Flashlight Enthusiast
Joined
Jan 25, 2002
Messages
2,030
Location
Bay Area, CA
You could get one of Doug's UBHs.
As soon as I get mine the KL1 is going on there and my E2e head will rejoin its body.
 

sodakar

Newly Enlightened
Joined
Jun 9, 2001
Messages
153
I seem to recall that someone had a thread long ago about the E-series heads fitting right into a Streamlight Scorpion body...

If you want your Streamlight Scorpion to become a pre-focused light with a SureFire reflector, that might work for you (or someone else)...

Of course, then you end up getting more posts about spare Streamlight Scorpion heads that need a home... LOL...
 

alberto

Enlightened
Joined
Nov 15, 2002
Messages
448
Location
Atlanta, GA USA
Doesn't Doug's UBHs require both the head and tail? Of course my tail stays with the E2e/KL1.

On another thread I read that Surefire sells some heads (bezels) but their telephone order folks aren't aware of it, unless you can provide a part #. Is anyone aware of the availability and part # for E1e/E2e bodies/tails?
 

SurefireM6

Enlightened
Joined
Oct 30, 2001
Messages
546
I'll buy E2e/E1e heads if any of you want to sell them. I should post a request on the BST forum.
 

GJW

Flashlight Enthusiast
Joined
Jan 25, 2002
Messages
2,030
Location
Bay Area, CA
Originally posted by alberto:
Doesn't Doug's UBHs require both the head and tail? Of course my tail stays with the E2e/KL1.

On another thread I read that Surefire sells some heads (bezels) but their telephone order folks aren't aware of it, unless you can provide a part #. Is anyone aware of the availability and part # for E1e/E2e bodies/tails?
<font size="2" face="Verdana, Arial">They definitely sell the tails.
Z52 is the HA
Z53 is the Gunmetal
Z54 is the Black.
 

Latest posts

Top