LensBright
Newly Enlightened
Dear CPF Members,
I have been a flashaholic forever and found my way over to CandlePower Forums from Usual Suspect Network. I recently began some work with Chapman-Leonard Studio Equipment the creator of the LensLight™ and was immediately intrigued. Unfortunately the LensLight™ is no longer produced. I saw the lights potential and asked for the ability to reengineer and streamline the light within their parameters. The resulting prototype of the modded LensLight™ encompassed custom engineering, precision manufacturing, and hand assembly. I will be building limited quantities as the process is substantially expensive and not under CL production. I have never been much of a poster in any forum, but I am very passionate about this light. I am not Chapman-Leonard and the lights are not produced by LensLight™, but may continually represent these flashlights in the future if the new custom product proves itself.
Sincerley,
LensBright
Overhauled C/L Enterprise LensLight™. Check out first prototypes.
MADE in USA.
Modded Lens Light Specs:
v (2) AA Batteries
v Patented Focusable Aspherical Lens System
v McClicky Tail Cap Forward Clicky Switch
v High Tolerance American CNC Machining
v 7075 Aluminum Construction
v Type III Hard-Anodize
v Premium Bin CREE XR-E R2 LED
v Premium Bin LUMILEDS K2 w/TFFC
v Fully Regulated Light Engine
*Energizer Lithium AA batteries used in LensLight™ for beam profile photos.
Extreme narrow focus with 2(AA) LensLight™ CREE XR-E R2 @ 30yds 25 sec
Narrow focus with 2(AA) LensLight™ CREE XR-E R2 @ 30yds 25 sec
Mid flood spot focus with 2(AA) LensLight™ CREE XR-E R2 @ 30yds 20 sec
Flood focus with 2(AA) LensLight™ CREE XR-E R2 @ 30yds 15 sec
Energizer Lithium (2) CR123 750ma 6.0 volts TIR optic 235+ lumens @ 30yds 15 sec
I have been a flashaholic forever and found my way over to CandlePower Forums from Usual Suspect Network. I recently began some work with Chapman-Leonard Studio Equipment the creator of the LensLight™ and was immediately intrigued. Unfortunately the LensLight™ is no longer produced. I saw the lights potential and asked for the ability to reengineer and streamline the light within their parameters. The resulting prototype of the modded LensLight™ encompassed custom engineering, precision manufacturing, and hand assembly. I will be building limited quantities as the process is substantially expensive and not under CL production. I have never been much of a poster in any forum, but I am very passionate about this light. I am not Chapman-Leonard and the lights are not produced by LensLight™, but may continually represent these flashlights in the future if the new custom product proves itself.
Sincerley,
LensBright
Overhauled C/L Enterprise LensLight™. Check out first prototypes.
MADE in USA.
Modded Lens Light Specs:
v (2) AA Batteries
v Patented Focusable Aspherical Lens System
v McClicky Tail Cap Forward Clicky Switch
v High Tolerance American CNC Machining
v 7075 Aluminum Construction
v Type III Hard-Anodize
v Premium Bin CREE XR-E R2 LED
v Premium Bin LUMILEDS K2 w/TFFC
v Fully Regulated Light Engine
*Energizer Lithium AA batteries used in LensLight™ for beam profile photos.
Extreme narrow focus with 2(AA) LensLight™ CREE XR-E R2 @ 30yds 25 sec
Narrow focus with 2(AA) LensLight™ CREE XR-E R2 @ 30yds 25 sec
Mid flood spot focus with 2(AA) LensLight™ CREE XR-E R2 @ 30yds 20 sec
Flood focus with 2(AA) LensLight™ CREE XR-E R2 @ 30yds 15 sec
Energizer Lithium (2) CR123 750ma 6.0 volts TIR optic 235+ lumens @ 30yds 15 sec
Last edited:
oo:
