P7-KL4....Beamshots added

[DaFABRICATA]

I bought this last week from the marketplace and didn't care for the tint, so I decided to upgrade it with a P7. It's a bit brighter now. There is a slight + in the center, but is not very noticable in actual use. Overall, I am very happy with the finished mod.


- CSXOI P7 Emitter
- Stock KL4 Driver
- Enlarged Reflector Opening
- Modified Heatsink

Stock KL4

P7 Modded KL4....

Just to add...updated 2-2-09

IMO, the P7 works MUCH better with the KL4 reflector.
I have done about 3-4 MC-E-KL4 mods and 9-10 P7-KL4 mods and this has always been my experiance

MC-E/ Stock Driver---------------------------------------------------------P7/ Stock Driver

1720

 

[Stillphoto]

Re: P7-KL4

Wow - You make it look easy. Now I just need to find a shop to enlarge my reflector opening.

Good stuff!

 

[LED Zeppelin]

Re: P7-KL4

Wow - You make it look easy.
Good stuff!

+1!

 

[darkzero]

Re: P7-KL4

Great job again! You're really cranking out those SF mod, I've been watching them all. Going to have to start calling you the SF master!

 

[DaFABRICATA]

Re: P7-KL4

Thanks for the compliments!

Well darkness has finally arrived and my first impressions are.... WOW!!

I don't have a stock KL4 to campare it to, but it lights up my backyard quite nicely:twothumbs:naughty:

EDIT: I have a stock KL4 now

I'll try to get some good beamshots up tonight.

The KL4 just looks so evil with that huge LED in there:laughing::thumbsup:

I think I'll refer to this one as the "Hot Rod" .....Big engine in a little host with the throttle floored:kiss:

 

[ICUDoc]

Re: P7-KL4

Mmmm, interesting! Drive current estimate? Runtime? Comparison with L4???? Inquiring minds, piqued and interested, want to know more.....

 

[Der Wichtel]

Re: P7-KL4

Where did you get the CSXOH emitter?

 

[toby_pra]

Re: P7-KL4

Nice work!!!

As always...

 

[CandlePowerForumsUser]

Re: P7-KL4

WAOW! Hows the beam? any holes up close or is it pretty clean.

Beam shots or it didn't happen!

Great mod btw. :thumbsup:

"There is a slight + in the center, but is not very noticable in actual use. Overall, I am very happy with the finished mod. "

looks like you answered it already

 

[c0t0d0s0]

Re: P7-KL4

Is is still a 2xCR123A light, or do you power it with a single 17670? What's the drive current?

 

[DaFABRICATA]

Re: P7-KL4

It is the stock driver with 2X123's




Got a new camera....

Beamshots added to post#1

 

[darkzero]

Re: P7-KL4

It is the stock driver with 2X123's




Got a new camera....

Beamshots added to post#1

Curious, doesn't the stock driver put out 6v? The P7 can handle it?

The baby is bright! :twothumbs

 

[DaFABRICATA]

Re: P7-KL4

Curious, doesn't the stock driver put out 6v? The P7 can handle it?

The baby is bright! :twothumbs

I have no clue what the stock KL4 driver puts out:shrug:

It IS bright as hell!
I've been using it constantly since doing the mod with zero problems....it gets warm, but I also don't run it for more than a few minutes at a time.

Honestly, This is now one of my favorite lights.:twothumbs

The stock KL4 is a complete jock when compared to it....now I just wish I could get my black one open to do the same.

 

[c0t0d0s0]

Re: P7-KL4

I have no clue what the stock KL4 driver puts out:shrug:

It IS bright as hell!
I've been using it constantly since doing the mod with zero problems....it gets warm, but I also don't run it for more than a few minutes at a time.

Honestly, This is now one of my favorite lights.:twothumbs

The stock KL4 is a complete jock when compared to it....now I just wish I could get my black one open to do the same.

The KL4 has a boost driver which drives the LuxV with its 6+V Vf at ~800mA. With 2xCR123A and P7, it probably goes direct drive...

An MC-E in 2s2p configuration would probably be a better match for this driver... but who knows whether or not it it would work well with this reflector.

 

[wquiles]

It's a bit brighter now

Talk about an understatement!!!

Nice work :thumbsup:

 

[louie]

I'd love to know if it gets as hot as a stock KL4 can when used for long periods...

 

[Illum]

most likely thats a yes...which is the primary reason why I'm hesitant to go into P7s...the KL4 head is already poorly suited for a luxV in terms of heatsinking.....I dunno what the P7 could do to it.

Its an interest comparison too..both KL4 and P7-KL4 are 4 die lights :twothumbs:

 

[Edwood]

KL4 can actually host a 6 die 1000 lumen Ostar, underdriven a bit.

KL4 heads are fun to open up, eh?

 

[Cuso]

KL4 heads are fun to open up, eh?

Yeah KL1 are so much fun also...Ed do you have beamshots of that beast??

 

[seattlite]

Yeah KL1 are so much fun also...Ed do you have beamshots of that beast??

From Edwood's other post on B/S/T(lower left, "15-3"):

Beamshots from Paladin