• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

Sold/Expired PAYMENT/RESERVATION for the smallest regulated P4 light, E-Micro!

ARC mania

Flashlight Enthusiast
Joined
Jun 13, 2002
Messages
1,515
Location
The land of the rising sun.
Smallest regulated P4 light, E-Micro! Now Shipping!

I would like to change this thread to a pre-payment thread. In order to reserve an Extreme Micro, I will need payment in advance in order to make this run become a reality. I will offer two configurations of drive currents to the LED which are: 440ma and 350ma. Please specify when sending payment, by PM or on this thread. I apologize its taken some time to finalize everything. More details below:

CR2, a common battery size, can be found wherever you get your KI batteries. Department and photo stores have them. Of course the internet would have the best prices. I wanted to make sure the lights will always have an easy to find source of power. So no exotic cells will go into the small E-Micro.

extrememicro002upab5.jpg


extrememicro001upjx5.jpg


Based on the internal dimensions of the Japanese Katokichi Ichishiki (KI) and Katokichi Ichishiki-Tactical (KI-T) light, the EM is approximately 24% smaller then the KI and 30% smaller then the KI-T through the use of a new reduced-size converter. The finished light is 43.5mm in length which is still extremely small for a CR2 powered light.

You'll be getting the usual stuff that I put in other lights. The EM will have a hand tested, premium grade, SSC-P4 emitter surrounded by a custom ground aluminum reflector. Shielding the emitter is a SchottB270 ultra-clear glass with AR coating on both sides. The T6061 grade aluminum body will be natural hard anodized with "MJP" engraved on the head. O-rings will be sealed for limited waterproofing. And like the other lights, future upgrades are easy because of the threaded light engines.

The light will cost $174 - 19% cheaper than yet twice as bright as the KI lights. The lights will be shipped from Japan Global Express with tracking. For each light sold, I'm donating $4 to CPF to keep the lights on.

I'd like to invite you to get in line for this newest custom light. Expected finish date is 8 to 10 weeks starting from the 18th. I'll be taking pre orders until June 26th in which I will need advance payment in order to make this a go for those wanting an Extreme Micro. I need to sell in advance as many as possible.

extreme20micro20018yq6.jpg


extreme20micro20019kk1.jpg


extreme20micro20014qh0.jpg


extreme20micro20015pp9.jpg


extreme20micro20016vd4.jpg


extreme20micro20017hp3.jpg


Here is the runtime graph with the LED driven at 350ma:

typecuw0.gif


Here is another graph with the LED driven at 440ma

typeaus7.gif


When sending payment make sure that you include the following: complete shipping address, CPF NAME and what you are paying for. My Paypal e-mail address is: **************** I will start a list here. "First come, first served" for the pre-order. This sale is for a limited time. The ones marked 440ma will have a 440ma output the the LED and unmarked are 350ma.

1..Uriah - blue body color - 440ma output - shipped!
2..Nake - blue body color - 440ma output - shipped!
3..blitzlicht65 - natural body color - 440ma output - shipped!
4..gromit - 440ma output - shipped!
5..tanghy - natural body color -
6..dirkp - blue body color - 440ma output -shipped!
7..ArsMachina - blue body color - 440ma output - shipped!
8..kenster - blue body color - shipped!
9..Chocolatelab33 - 440ma output
10.kiely23+ - natural body color - 440ma output - shipped!
11.flashgreenie - natural body color - shipped!
12.marcspar - blue body color - shipped!
13.dallas - 440ma output - shipped!
14.billybright - narural body color - shipped!
15.gromit - blue body color - 440ma - shipped!
16.fasteddie -natural body color - shipped!
17.white light - natural body color - 440ma - shipped!
18. XXX - blue body color -shipped!

ARC mania
 
Last edited:
Re: ANNOUNCING the smallest regulated P4 light, the all-new E-Micro.

Is it really smaller than a Draco or a Drake?
Or do you not count them because they have Cree-XREs?
 
Re: ANNOUNCING the smallest regulated P4 light, the all-new E-Micro.

I'd like to purchase the E-Micro Beauty..! Can you please tell or show us what the engraved surface will look like? I wish you every success on your E-Micro project. Cordially, Richard...
 
Re: ANNOUNCING the smallest regulated P4 light, the all-new E-Micro.

Single stage, I presume?
Expected runtime?
 
Re: ANNOUNCING the smallest regulated P4 light, the all-new E-Micro.

Like it... If what you say is to be expected, I'm in... :)
If they will be serialized, #004 for me ;)

Also, what is the reflector-diameter ?
 
Re: ANNOUNCING the smallest regulated P4 light, the all-new E-Micro.

sweet. im in for one
 
Re: ANNOUNCING the smallest regulated P4 light, the all-new E-Micro.

I´m in for one if it would be possible to get one in pure aluminum instead of natrual hard anodising.

Eric
 
Re: ANNOUNCING the smallest regulated P4 light, the all-new E-Micro.

any attachment points?

Most likely in for one.
 
Re: ANNOUNCING the smallest regulated P4 light, the all-new E-Micro.

Mike, will the converter handle RCR2 voltage also, or will this new light be a primary CR2 cell only?

Thanks
 
Re: ANNOUNCING the smallest regulated P4 light, the all-new E-Micro.

Mike, I'm in for one.


Karl
 
Last edited:
Re: ANNOUNCING the smallest regulated P4 light, the all-new E-Micro.

Attachment point please! It looks very slippery as is? Might be interested with my concerns addressed.
 
Last edited:
Re: ANNOUNCING the smallest regulated P4 light, the all-new E-Micro.

looks good. kindly get me into that list :)
 
Re: ANNOUNCING the smallest regulated P4 light, the all-new E-Micro.

This looks really cool. Any plans for a Ti one?
 
Re: ANNOUNCING the smallest regulated P4 light, the all-new E-Micro.

Looks nice.


:)
 
Last edited:
Top