Peak eiger problem with 10440 battery

american

Enlightened
Joined
Mar 17, 2010
Messages
782
I have 2 new eigers they both work great with eneloops. Once I put 2 efest 10440s in the qtc doesn't work its just on or off. One I s a lug body. Other is a momentary. Any ideas?
 

jabe1

Flashlight Enthusiast
CPF Supporter
Joined
Apr 25, 2008
Messages
2,866
Location
Cleveland,Oh
Definitely odd, mine don't do that at all. I'm not using the efest, but all of mine work well.
 

american

Enlightened
Joined
Mar 17, 2010
Messages
782
Update the lug body works basically as good as an eneloop. But the momentary/keychain post body still acts like no qtc with the 10440 on eneloops is fine. I've tried swapping heads and other things. I've narrowed the problem down to either the body or maybe just the qtc that's either too long or too short
 

jabe1

Flashlight Enthusiast
CPF Supporter
Joined
Apr 25, 2008
Messages
2,866
Location
Cleveland,Oh
Are both QTC pills installed the same way? If you look down the tube, are they the same?
 

jabe1

Flashlight Enthusiast
CPF Supporter
Joined
Apr 25, 2008
Messages
2,866
Location
Cleveland,Oh
You should contact Robyn at Peak. It sounds like a faulty QTC pill.

these are such simple lights, there are only a few things that can be faulty. Have you cleaned the threads etc?
 
Top