• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

Sold/Expired Pre-payment for the HAIII black SF-III. ENDED!

Re: Pre-payment for the HAIII black SF-III.

If this light is just like the Original design in length, I would be interested in this run.
 
Re: Pre-payment for the HAIII black SF-III.

In order to stop the confusion, I am thinking about making both designs, the longer version and shorter version. The tailcap for the shorter version will use the original switch and tailcap just like the run that recently finished. The tailcap for the longer version will come with the McClicky and the pre-pay price will be a bit more than the shorter version as there will be more masking required as well as more material and labor involved. I need 24 hours to make some changes on the first page and will put up the pre-pay price of the longer version SF-III. All in all only 16pcs of the shorter version and 16 pcs of the longer version will be made. 8pcs combat grip and 8pcs standard grip. I apologize for the confusion.

ARC mania
 
Re: Pre-payment for the HAIII black SF-III.

ARC mania said:
Here are pictures of the SF-III from the earlier run to give you an idea of what it looks like. You'll have to temporarily use your imagination to make out the SF-III in HA III black 🙂

2h87i0x.jpg


rkvg4y.jpg


14ca4jb.jpg
Click to expand...

Mike, I saw these posted pictures and your quote to imagine it in black.. and got in line for this special run.

So I would like mine to be what you have describe above in combat grip. The exact one pictured, only in a cool black HA III and Ti bezel 🙂

Anti-roll tailcap are very functional but from design point of view its making the combat grip to 'busy'.

Would you be able to separate the older version special run in another thread? It will certainly clear things up I believe.
 
Re: Pre-payment for the HAIII black SF-III.

Going back to the drawing board, I have decided to keep this thread the way it started by offering the shorter version of the HA III black SF-III's with titanium bezels to prevent further confusion. For the older design of the 3pc body, I will put up a separate pre-pay thread as a few people sent me a PM that they insisted on having a 3pc older design. I should be getting a quote from TNC within the next 24 hours and will decide whether to make the 3pc design in all titanium or aluminum. I apologize to those I have confused as it was not my intention. I get PM's and e-mail from people hitting me up to make both designs if this is going to be the last of the SF-III series.

ARC mania
 
Re: Pre-payment for the HAIII black SF-III.

A Three Piece Titanium SF III ???

This would become my holy Grail light !!!

Please make this happen!

Jochen
 
Re: Pre-payment for the HAIII black SF-III.

Titanium SF III.??? I am in for one . I would prefer Titanium instead of the black one.
 
Re: Pre-payment for the HAIII black SF-III.

just wanted to say that this SF-III with Ostar SMT led seriously kicks out some masive light. Im getting more and more happy for it everytime i use it. Sometime the beam is just too bright to use in the park, kinda like blinds me when using close/medium range.
 
Re: Pre-payment for the HAIII black SF-III.

Titanium? :huh: He said the magic word! Yeah, he did!!! :party:

My only problem : I just can't take two of them! :broke:
 
Re: Pre-payment for the HAIII black SF-III.

ARC mania said:
Going back to the drawing board, I have decided to keep this thread the way it started by offering the shorter version of the HA III black SF-III's with titanium bezels to prevent further confusion. For the older design of the 3pc body, I will put up a separate pre-pay thread as a few people sent me a PM that they insisted on having a 3pc older design. I should be getting a quote from TNC within the next 24 hours and will decide whether to make the 3pc design in all titanium or aluminum. I apologize to those I have confused as it was not my intention. I get PM's and e-mail from people hitting me up to make both designs if this is going to be the last of the SF-III series.

ARC mania
Click to expand...
for BRASS im in mate :wave: dont care about cost
 
Re: Pre-payment for the HAIII black SF-III.

For as long as I can recall, Mike have never did a FULL titanium light. If thats to happen it will be his very first! schweet!

I m still in for this Special Forces Black Super Flashlight-III and I ll start saving up for the super secret MJ ti light!!
 
Re: Pre-payment for the HAIII black SF-III.

I've been wondering about brass - other than weight - what would be any other disadvantages?? - it would be cheaper to make than Ti - dissipate heat better - not need any coatings - look nice if you want to keep it polished.
 
Re: Pre-payment for the HAIII black SF-III.

Glenn7 said:
I've been wondering about brass - other than weight - what would be any other disadvantages?? - it would be cheaper to make than Ti - dissipate heat better - not need any coatings - look nice if you want to keep it polished.
Click to expand...
for me it is perfect in every way, has heft, beauty and functionality. Ti is scratchy and Brass just spins. easier to machine as well.:wave:
 
Re: Pre-payment for the HAIII black SF-III.

Brass reacts to the sweat of your hands and gets ugly, oxydation I suppose. I think that this process also developps a metallic smell. I have no brass lights or other objects, so you may correct me, if I'm wrong.

Polishing the light surely works to keep it shiny, it looks very nice indeed. I just wonder about aggressive knurling, I don't think you can polish that successfully.

In another thread, they also talked about different materials and got crazy : Carbon fiber, sterling silver, gold, platinum, depleted uranium... :shakehead

I like titanium because you can give it different finishes, it needs no care, feels great on skin contact and doesn't react to anything. I like stainless steel as well, but it's too heavy for big lights, AAA format is OK, I have one AA (Jetbeam Element E3P) which is already quite heavy.
 
Re: Pre-payment for the HAIII black SF-III.

Henk_Lu said:
Brass reacts to the sweat of your hands and gets ugly, oxydation I suppose. I think that this process also developps a metallic smell. I have no brass lights or other objects, so you may correct me, if I'm wrong.

Polishing the light surely works to keep it shiny, it looks very nice indeed. I just wonder about aggressive knurling, I don't think you can polish that successfully.

In another thread, they also talked about different materials and got crazy : Carbon fiber, sterling silver, gold, platinum, depleted uranium... :shakehead

I like titanium because you can give it different finishes, it needs no care, feels great on skin contact and doesn't react to anything. I like stainless steel as well, but it's too heavy for big lights, AAA format is OK, I have one AA (Jetbeam Element E3P) which is already quite heavy.
Click to expand...
the Patina has a quality of its own to some, adds character i suppose, Brass is used on ships for its beauty and functionality as well. Blindfolded i can tell if i have a brass light in my hands. Having a metal that under achieves in heat dissipation to house a heat emitting led is just crazy as far as i am concerned so for me its aluminum or Brass.:twothumbs
 
Re: Pre-payment for the HAIII black SF-III.

I think I'll be staying on the sidelines for this one a little longer and see how it pans out! :popcorn:
 
You must log in or register to reply here.

Similar threads

troutpool
FOUND Surefire G2 Black
Replies
0
Views
557
troutpool
troutpool
M
WTT: SF Defender head
Replies
5
Views
1K
Munkel
M
Rstype
Sold/Expired Muyshondt aeon mk III S2 in titanium
Replies
1
Views
1K
Rstype
Rstype
a1sealbeach
WTB : Moddoolar C Series Interface in black
Replies
0
Views
511
a1sealbeach
a1sealbeach
wacbzz
Sold/Expired SF P1R Peacekeeper
Replies
7
Views
1K
Chauncey Gardener
Chauncey Gardener

Latest posts

Back
Top