Putting a p91 in a g2 with cell extender?

[cobb]

I was looking for g2s on the net last night and came across this site that sells a cell extender for ten bucks.

http://osograndeknives.com/Flashlights/Sure-Fire/sure-fire_battery_adaptor_(an14-od).htm

I have read that with pillas you can use a p90 lamp, but I rather use regular old cr123s as I have had bad experiences with recharagable batteries.

Is this long enough or so I need a spacerto use 3 cr 123s with a p90 or p91 lamp? I know the lens would need to be upgraded, but was just brain storming and drooling.

 

[jtivat]

The AN14 is for the B65 Nicad battery it is too long to use with 3 123's. You need an A19 it will not match the Nitrolon on the G2 but will work.

 

[Size15's]

The A19 is a black anodised metal body extension that holds one-SF123A battery.



You can use it on the G2 to create a three-SF123A body that requires the P90 or P91 Lamp Assembly.

Due to the amount of heat generated by these lamps it would be a good idea to purchase a G2Z bezel (it has a Pyrex window).

Al

 

[cobb]

THanks. That looks pretty good right there as is.

 

[Lightedge]

I use an AN14 with a small 3/8" aluminum plug in the end and 3xcr123 and a P91. Works great, matches the regular G2 finish and only adds about 3/8" over a typical 9V Surefire.

 

[cobb]

Thanks. YOu think that is a good price for the adapter? I may if I use it a lot convert to the pillas, but not right now.

 

[Bullzeyebill]

My G2 has a distorted lens, actually center of lens, due to running a P91 for a few minutes, with two unprotected RCR123's (protected RCR123's will not even turn the light on).

Bill

 

[Size15's]

The G2Z Bezel has a Pyrex window (the G2's bezel has a Lexan window).

Bill, I suggest you call SureFire to get hold of a G2Z bezel.

Al

 

[Illuminated]

You might consider checking with Flashlightlens.com for a UCL lens for the G2. I'm really happy with mine...

John

 

[Topper]

Hi Cobb, if you get the AN14 and use a spacer later you might want to switch to Pila's a 168s and 150s (one of each)
fits like a glove in the G2 with the AN14. The P91 needs a double tap to fire up but thats not really a problem for me.
Topper /ubbthreads/images/graemlins/smile.gif

 

[cobb]

THanks. I had both of those ideas in mind. Getting the aftermarket lens and three 168s and a p91 lamp. I just wished my credit card didnt crap out when I placed the order and I cheapened up and just ground out the inside of my legend for the 3 wat led drop in module.

Wonder if a surefire cell extender works on the legend xl?

 

[Topper]

I do not think the A19 or AN14 will fit on the light you have (legend xl) sorry bout that.
Topper /ubbthreads/images/graemlins/smile.gif

 

[cobb]

Thanks, sure no problem. Just dont want to throw away valuable surefire funds. I am thinking of buying a 3 cell surefire light like the melinum 3 or m3 and a one of those new led heads the kl1 I think and the p91 lamp.

 

[Warhoggie]

[ QUOTE ]
Size15's said:
The A19 is a black anodised metal body extension that holds one-SF123A battery.



You can use it on the G2 to create a three-SF123A body that requires the P90 or P91 Lamp Assembly.

Due to the amount of heat generated by these lamps it would be a good idea to purchase a G2Z bezel (it has a Pyrex window).

Al

[/ QUOTE ]


Al is right, I warped my 6P bezel with the old lexan (plastic) lens using a P91 with rechargeable 123s. /ubbthreads/images/graemlins/frown.gif