Ra Clicky Part 9

Candle Power Flashlight Forum

Help Support CPF:

Status
Not open for further replies.
This is what the light looks like in front pocket carry:

IMG00233-20090721-1516.jpg


The light does not dangle in my pocket at all. And when I sit down, there is no bulge or uncomfortable added tightness to my pants. I do not even know the light is there...:shrug: until I reach in my pockets to get something. 🙂 Let's face it, the Ra Clicky is not exactly the thinnest of lights, so every little bit helps for comfort lol
 
Last edited:
The picture helps a lot.
With both of the free ends of the constrictor coming together to make the loop and overhand knot for attaching to the clip, it would certainly seem that there is no way for the constrictor to work itself loose.
Thanks
 
Numbers said:
The picture helps a lot.
With both of the free ends of the constrictor coming together to make the loop and overhand knot for attaching to the clip, it would certainly seem that there is no way for the constrictor to work itself loose.
Thanks
Click to expand...

Your welcome! Glad I can be of help. :thumbsup:
 
Thanks man :thumbsup:

I was trying to find a tritium bezel for a clicky. I thought I saw a post for them before.
 
Last edited:
Numbers said:
Although I thought the constrictor knot was best used on a (at least slightly) compressable round surface, I see that animated knots only says a round surface is necessary. Still I am not so sure I would trust it completely on a surface that does not have at least some give.

CaNo, how long have you been carring that way with no problems? Perhaps I will give it a try. Perhaps the paracord itself has enough give in it to keep the knot tight.
Click to expand...

Do this test Numbers....

Follow the instructions on the "Animated Knot" link dagored provided on the previous page. But instead of tying it on the Ra, tie it around your index finger when it instructs you to insert the object inside the knot before tightening...

Once you tighten the knot around your finger, try pulling the loose ends of the paracord off your finger.... and see if it will come off. If you did it right... I bet you it won't... 😗

You have a better chance of popping your knuckles or pulling your finger off before that knot comes loose. Remember that paracord can support 550lbs of weight. :naughty:
 
I understand completely because my finger would compress slightly I am sure there is no way the knot would come off. I once had a broken clamp on a radiator hose and the constrictor knot got me home, again the knot was used on a a compressable (the hose) surface.
I was just not sure it would work on a non compressable metal flash light tube. But I understand your method and have confidence in it. I already have one of my lights tied as your picture shows and it looks good so far.
Thanks.
 
Numbers said:
I understand completely because my finger would compress slightly I am sure there is no way the knot would come off. I once had a broken clamp on a radiator hose and the constrictor knot got me home, again the knot was used on a a compressable (the hose) surface.
I was just not sure it would work on a non compressable metal flash light tube. But I understand your method and have confidence in it. I already have one of my lights tied as your picture shows and it looks good so far.
Thanks.
Click to expand...

And like you had read before, it only works on round surfaces, because it needs to wrap around something that has a smooth, consistent surface for gripping purposes. A square surface leave space between the paracord and the object being gripped. That space made possible by the corners of that object leaves room for failure, because it cannot wrap completely around the object. So in actuality, the corners are the only things getting gripped...

The Ra clicky is consistently round all around it's body. That's why the constrictor knot works on it so well. (Just answering your question on the previous page, but I can see now that you know first hand it's capabilities, and found your own answer :thumbsup🙂

Take a picture and show us your set-up bud! :nana:
 
Numbers said:
I understand completely because my finger would compress slightly I am sure there is no way the knot would come off. I once had a broken clamp on a radiator hose and the constrictor knot got me home, again the knot was used on a a compressable (the hose) surface.
I was just not sure it would work on a non compressable metal flash light tube. But I understand your method and have confidence in it. I already have one of my lights tied as your picture shows and it looks good so far.
Thanks.
Click to expand...

That's why I always keep paracord on my person... you never know when it can come in handy! I had made some cobra stitched bracelets made of 550 paracord, and also made some little ones for my keychain just to prepare for situations like you had faced *knock on wood*. Atleast you were smart enough to think of something quickly like you did. :twothumbs
 
After following the ra clicky thread for a while, I finally pulled the trigger. I couldn't be happier. I own several other lights, while I always thought max lumens meant a better light, I was wrong. The color and beam of the edc clicky is perfect in everyway. I think I am going to order another, just the step ip 140gt with titanium bezel. Very nice lights indeed! Happy customer here.

PS. TX tactical source went above on beyond with there service. I ordered on Saturday asking if I could get it on Friday for my trip. not only rid I get a responce in a matter of seconds. They rushed it to me overnight free of charge. They have a returning customer here.
 
Ra Clicky Executive vs Ra Every Day Carry Executive

So, on Ra's website, the bullet-pointed features that that are listed for the Clicky Executive that aren't listed for the EDC Executive are:

  • Protects rechargeable batteries from over-discharge.
  • Full thermal management.
  • Potted electronics for the ultimate in reliability under extreme conditions.
  • Anti-damage battery compartment protects battery under extreme conditions.
  • Stainless steel crenelated bezel.
  • Reverse battery protection without diode power penalty.
I thought the two were identical except the lumens/efficiency. Or is this a case of presenting the Clicky Exec in the best, uh, light while downplaying the EDC's features?

In other words, I'd buy the cheaper one if it's the same (except for the light source). Is it?
 
Last edited:
Re: Ra Clicky Executive vs Ra Every Day Carry Executive

Thank you, moonshadow. I could not find that info via search. 😕

Ra should just call this fact out on their site.
 
Re: Ra Clicky Executive vs Ra Every Day Carry Executive

I've had to make this decision as well, and realized... if I am crazy enough to pay this much for a flashlight... I might as well get the total package...

I personally customized mine to my liking, and I do not regret my decision. Yes it was a little more expensive, but it would have bothered me to know in the back of my head, that I did not get the best possible product in my purchase.

Nothing is wrong with the EDC, but the full thermal protection, and battery protecting extras you get with the Executive I believe is worth the money if you ever use the flashlight for long periods of time. But if you are just a turn on, turn off kinda person, get the EDC, since the thermal protection will not even be an issue for your type of use.
 
Re: Ra Clicky Executive vs Ra Every Day Carry Executive

Don't let my words make the decision for you.... It all depends on how you plan to use your light. Hope this link to UniqueTitanium's chart will help you in your decision making:

http://uniquetitanium.com/ra_lights.htm

Whichever one you pick... you are getting a Ra. Which means lifetime guarantee, and the option to trade it back in to upgrade through Henry.
 
Re: Ra Clicky Executive vs Ra Every Day Carry Executive

Errr...CaNo, the link in post #2 says there is no difference besides lumens/efficiency. FWIW.
 
Re: Ra Clicky Executive vs Ra Every Day Carry Executive

The edc has all that the clicky excutive has, just a lower output. It is a very good light, buy with confidence.
 
Re: Ra Clicky Executive vs Ra Every Day Carry Executive

How do they differ from the "original" RA clickies? I have the 140-CGT
 
Re: Ra Clicky Executive vs Ra Every Day Carry Executive

Badger_Girl said:
How do they differ from the "original" RA clickies? I have the 140-CGT
Click to expand...

I think they are the same just different software? But I'm no expert by far. I'm sure some here can tell you for sure.
 
Re: Ra Clicky Executive vs Ra Every Day Carry Executive

I don't think we need a separate thread for this - I'm merging it with the main Ra Clicky thread.
 
Status
Not open for further replies.

Latest posts

Back
Top