Raw Neutral White vs Cool White

[chorlton]

Can anybody tell me if there is any difference in output between the Raw with Neutral and with Cool white emmiter? :thinking:

 

[zipplet]

The neutral white has a slightly lower output - I believe around 180 lumens for the neutral white vs 200 lumens for the cool white at the brightest option.

However, comparing my cool white raw NS and neutral white raw AL with both at the low setting (20 lumens cool white, probably a teeny bit less for the neutral), I can't really see much difference. The eye can't tell the difference with such small differences in output.

 

[FredericoFreire]

Take a look at this thread.

 

[chorlton]

Thanks guys, I've ordered a Raw ns 200/100 with cool white r2 as I feel it may have slightly better throw. However I might ask Rob if I can purchase a neutral white 200/20 replacement emmiter & pcb as it has a very nice tint :twothumbs:thanks:

 

[chorlton]

Got my NS with cool white R2. Th colour is very pleasing, warmer than a Q5 or Luxeon

 

[MikeSalt]

Looks like you made the right choice there then, you've got the tint you want without compromising the output figures.

 

[chorlton]

Thanks Mike, I couldn't fault this light......scary isn't it, I think right now the only improvement I could make is order the same thing in Titanium

 

[MikeSalt]

Thanks Mike, I couldn't fault this light......scary isn't it, I think right now the only improvement I could make is order the same thing in Titanium

Here, let me help you with that improvement. Click Here

With the Raw NS/Al/Ti, there is only one tiny irritation. Because the contact patch of the low switch is small, it does not take a lot of contamination before low mode becomes difficult to engage.

The mistake I made was to over-lube the threads and O-ring, which acted as a magnet for dust and dirt to contaminate the low stub. If you keep the lubrication applied sparingly, the problem goes away.

 

[chorlton]

but hey, theres always :santa:

 

[EV_007]

OH man, now I'm gonna have to get in on this custom flashlight thingy.

This would be my first custom light. Warm tint and small, solid construction?

Do they ship to the U.S. and how's the pounds to dollars conversion?

Are there state side dealers?

 

[Steve L]

Hi EV_007,

I ordered directly from Lummi. Yes they ship to the USA. On the 26th the PayPal conversion rate was 1 USD = 0.529684GBP. Rob is currently running some Ltd Special Offers here.