Roy
Farewell our Curmudgeon Administrator
This runtime plot is for a XenErgy AL-606 with 6x5mm leds and one Xeon high pressure 4.8v 0.9amp bulb. This flashlight has three operating modes, Xenon, 3 LED or 6 LED. This light uses 2x123 batteries.
Equipment used is a photocell and a Radio Shack 22-805 multimeter with a PC interface that is using ScopeView software (V 1.08).
The vertical axis is in ma and the horizontal axis is in units of time.
Be aware that your actual battery milage may vary from that indicated by these runtime plots.
Xenon Bulb
The 50% brighness value is about 80 minutes.
Six LED
The 50% brightness value is about 5.5 hours.
Three LEDs
The 50% brightness value is about 10 hours.
Equipment used is a photocell and a Radio Shack 22-805 multimeter with a PC interface that is using ScopeView software (V 1.08).
The vertical axis is in ma and the horizontal axis is in units of time.
Be aware that your actual battery milage may vary from that indicated by these runtime plots.
Xenon Bulb
The 50% brighness value is about 80 minutes.
Six LED
The 50% brightness value is about 5.5 hours.
Three LEDs
The 50% brightness value is about 10 hours.
