Seaching for new 1xAA light

[chiphead]

Ok

I've given my Fenix L1D to one my sisters, oh the things they talk me out of. Anyway I'm looking for a new 1xAA light to meet the following specs:
*> 100 lumens
*Good water handling
*Can handle Lithium, 14500 & NiMH cells
*And not to heavy for a key chain

Ok guys, what's hot and what's not?


chiphead

 

[Zeruel]

A good number of them fit the requirements. As for the last point, perhaps an EZ AA R2 might fit the role although I hardly see AA lights for keychain duty.

 

[jhc37013]

Did you carry the L1D on your key chain? If so you could just get a LD10 but you may want to wait and see if that model gets the R2 like the PD30.

Like Zeruel mentioned maybe a EZ AA or maybe a Lumapower Connexion X2 could be another option.

 

[Roger Sully]

My choice for a 1AA would be an EagleTac P10A. I'm just not sure about carrying it on a keychain. My keychain lite, while being a 1AA is far from 100 lumens. I sport a Gerber Infinity Ultra on my Keychain with the P10A in my pocket.

 

[dracodoc]

I have been carry Jetbeam CLE 1.2 on my keychain for about 2 years. It's one of the smallest AA light (the 2.0 version is longer) before EZ AA.

Personally I prefer AA over AAA if the AA is not too big.
There are lots of AA light meet your specs, but light on keychain can have lots of scratches.

Compare to 2 years ago

I think other lights could done worse after 2 years on keychain -- especially black ones.

 

[chiphead]

Did you carry the L1D on your key chain? If so you could just get a LD10 but you may want to wait and see if that model gets the R2 like the PD30.

Like Zeruel mentioned maybe a EZ AA or maybe a Lumapower Connexion X2 could be another option.

Great...what's the R2?

chiphead

 

[Flying Turtle]

The only new AA that seems to meet your needs would be the EZAA. For me it's still too big for a keychain, but for you it might be fine. I wish the low was lower, so if this is important maybe a different light is in order.

Geoff

 

[jhc37013]

Great...what's the R2?

chiphead

Its a new(er) LED from Cree most of the recent Fenix light's have the Q5 led.
The R2 is slightly brighter and more efficient, not by alot though some lights now are coming with even newer LED emitters with the R4 and R5. The R2 is usually only 10-20 lumens brighter depending on the light and manufacturer but the R4 and R5 seem to be a more significant jump in brightness.

I think the R2 is more efficient than the Q5 so it can be driven harder for more output while maintaining good runtime.

I'm not positive on that there is more knowledgeable folks on here then me that can answer more clearly. I would expect to see a LD10 with a R2 soon though. Good luck

 

[henry1960]

I just recieved my Jet 1 Pro V3 R-2 And Love It. Packed with its 14500 Battery And Its Throw and Three Progamable Modes Makes This A Great EDC!!!

 

[NonSenCe]

R2 is the newer cree led emitter with little more output. the r2s are coming slowly to mass market now and very likely fenix also upgrades their lights to them by end of year or so.

for keychain use i also think that AA is too big. but thats personal thought. so i rather would tell you to look for cheap AAA: like itp eos (maybe in stainless).

going for nitecore ezaa is not a bad idea tho. i think its still the smallest AA light sold.

 

[kaichu dento]

My brother had an L1D and replaced it with the EZAAw I sent him, then sold the L1D. Since the L1D doesn't actually have a low setting, the two levels on the EZAA are a good replacement, especially with it's smaller dimensions.

 

[dracodoc]

Zebralight H50, H501 should be shorter than EZ AA, although they are bigger in diameter.

 

[jhc37013]

Zebralight H50, H501 should be shorter than EZ AA, although they are bigger in diameter.

Yes but how would he attach it to a keychain.

 

[Marduke]

Its a new(er) LED from Cree most of the recent Fenix light's have the Q5 led.
The R2 is slightly brighter and more efficient, not by alot though some lights now are coming with even newer LED emitters with the R4 and R5. The R2 is usually only 10-20 lumens brighter depending on the light and manufacturer but the R4 and R5 seem to be a more significant jump in brightness.

I think the R2 is more efficient than the Q5 so it can be driven harder for more output while maintaining good runtime.

I'm not positive on that there is more knowledgeable folks on here then me that can answer more clearly. I would expect to see a LD10 with a R2 soon though. Good luck

Don't confuse LED models with flux bins.

 

[jhc37013]

Don't confuse LED models with flux bins.

Yes that's right thank you. I knew what I wanted to say just couldn't get it out properly.

 

[dracodoc]

Yes but how would he attach it to a keychain.

With a lanyard? I plan to buy a H501 or other Zebralight later (I have to wait for their new announcements), maybe I will try to put it on keychain.

 

[Unclemonkey]

Did you carry the L1D on your key chain? If so you could just get a LD10 but you may want to wait and see if that model gets the R2 like the PD30.

Like Zeruel mentioned maybe a EZ AA or maybe a Lumapower Connexion X2 could be another option.

I don't know about the Luma? I have a incendio and a connexion and both no longer work. They have a weird problem with the threads? sent back for repair and still don't work. Be careful.

good luck.

 

[chiphead]

I have been carry Jetbeam CLE 1.2 on my keychain for about 2 years. It's one of the smallest AA light (the 2.0 version is longer) before EZ AA.

Personally I prefer AA over AAA if the AA is not too big.
There are lots of AA light meet your specs, but light on keychain can have lots of scratches.

Compare to 2 years ago

I think other lights could done worse after 2 years on keychain -- especially black ones.

Slick!

chiphead

 

[chiphead]

Its a new(er) LED from Cree most of the recent Fenix light's have the Q5 led.
The R2 is slightly brighter and more efficient, not by alot though some lights now are coming with even newer LED emitters with the R4 and R5. The R2 is usually only 10-20 lumens brighter depending on the light and manufacturer but the R4 and R5 seem to be a more significant jump in brightness.

I think the R2 is more efficient than the Q5 so it can be driven harder for more output while maintaining good runtime.

I'm not positive on that there is more knowledgeable folks on here then me that can answer more clearly. I would expect to see a LD10 with a R2 soon though. Good luck

And I thought I was keeping up with this stuff!