Show your Aleph3 lights

[Icarus]

The (other) A3 host I posted earlier has also since been completed, with this absolutely gorgeous light engine by VoB ...

http://i.imgur.com/SlX8I4b.jpg

Now, it looks like this ...

http://i.imgur.com/GG31U92.jpg

... with a 1wrx7 tube and a Ti Seraph tail cap (modded V54 high current switch)

Impressive light engine! :twothumbs

Which LEDs are used and how hard are you pushing them?

BTW I think you better post the photos

 

[Icarus]

Auto

Leef ... DSpeck UBH ... DSpeck UBH ... Leef ?

DSpeck made some specials this is one of them.

 

[archimedes]

Impressive light engine! :twothumbs

Which LEDs are used and how hard are you pushing them?

Triple XHP-50 J2 5B 4000K emitters, directly driven on max .... IIRC, current was measured at a modest ~ 5A with a pair of IMR18350, or ~ 10A with the tube swapped out for the Leef C2E 2x IMR18650[emoji317]

 

[archimedes]

So that is a DSpeck, too ... thanks !

That would've been my guess, I suppose, but I'd never seen that alternate knurling pattern :thinking:

 

[Icarus]

Triple XHP-50 J2 5B 4000K emitters, directly driven on max .... IIRC, current was measured at a modest ~ 5A with a pair of IMR18350, or ~ 10A with the tube swapped out for the Leef C2E 2x IMR18650[emoji317]

:wow: So, only full power... must be a lot of lumens then at 10A. :duck:
It must be a good handwarmer too then

 

[Icarus]

So that is a DSpeck, too ... thanks !

That would've been my guess, I suppose, but I'd never seen that alternate knurling pattern :thinking:

He made some other paterns too (photo DSpeck).

 

[archimedes]

:wow: So, only full power... must be a lot of lumens then at 10A. :duck:
It must be a good handwarmer too then

Well ... it does have a DrJones driver

I typically leave it set on 1/5/15/40/100 (no memory)

 

[archimedes]

He made some other paterns too (photo DSpeck).

Interesting !

Thanks for the photo .... I really like #4

 

[autogiro]

I hope Auto will return to clarify (and I was wondering about parts on the third torch, too) ... but I think that last one is in polished raw aluminum

Yes, the last one is all polished clear ano aluminum except for the Stainless bezel.

Yes, the two center ones are Dspeck bodies. I also have a brass version that is feeding a Torchlab triple (using TL E to TL brass adapter).
Auto

 

[Icarus]

The brass body looks very nice! :twothumbs I love brass.

 

[Icarus]

Triple-LuxIII Aleph3. McR18 reflectors (2006).

Triple XR-E Aleph3. McXR17 reflectors (2007).

Triple XP-E Aleph3. Ledil Triple XPE Optic smooth spot 35mm (2013).

 

[Icarus]

Two-stage Quad-LuxIII Aleph3 McR16 (2006)

 

[easilyled]

Fantastic mods Freddy. Also love the VOB L.E in Don's Aleph3.

Here are two tribute Aleph3s in Ti by the master TranquillityBase:-

 

[Icarus]

Gorgeous TB's Daniel! :twothumbs

 

[easilyled]

Gorgeous TB's Daniel! :twothumbs

Thanks Freddy. As you and I know, Scott is not only a great machinist but has an eye for exceptional design too.