Show your D and C mag mods
- Thread starter J.C.F.
- Start date
Help Support Candle Power Flashlight Forum
Jade, dark green and camo among others at www.zbattery.com
but I didn't see lime green. Maybe you can check in more detail.
Off to eat...:nana:
I don't believe they are made in lime green anymore. I have seen original lime green 3D bodies sell for $80 on the forums.
ElectronGuru
Flashaholic
😱
GLOCK18
Enlightened
1.25 Mag - Malkoff drop in - 2 stage switch - 3x17670 batteries parallel.
Locoboy5150
Flashlight Enthusiast
- Joined
- Nov 3, 2009
- Messages
- 1,102
These are all great. I never ever get tired of looking at Maglite modifications!
Jash
Flashlight Enthusiast
Had a P7 module coming in the mail. There's a postie stike here in Oz so now I won't get it by Christmas.
But seeing all these has cheered my up and got me thinking about some more mods for next year.
But seeing all these has cheered my up and got me thinking about some more mods for next year.
jcvjcvjcvjcv
Enlightened
Yeah, Fed-Ex ftw. They get my lenses from HK faster in The Netherlands then my bank transfers 100 bucks to Germany. :twothumbs
Here we didn't get the mail today because there was 2cm snow. 🙄
Here we didn't get the mail today because there was 2cm snow. 🙄
old4570
Flashlight Enthusiast
Black 3D SSC P7 MAg mod , 9 x AA - DX 8.4v single mode driver .
Green 2D XP-G R4 MAg mod , 6 x AA - 5 mode driver from P60 pill .
A stork brought my Lambda Revolution 3C a big brother...
Same spec's as the original 3C model, but this one runs on 3x NiMH D cells. Using AccuEvolution LSD D cells, I get an estimated 3+ hours on direct-driven high (MrGman measured the 3C model at 757.4 lumens), ~33 hours on 300mA medium, ~200 hours on 50mA low. All this in a package that's only slightly larger than a stock 2D. (download's SS bezel and MagRingD are my additions.)
These Lambda Revolutions are my bump-in-the-night lights - the 3C sits on my bedside table, and the 3D is in the front hall closet - and combined with AccuEvolution LSD cells and a Maha MH-C808M charger, they are my hands-down favorite flashlights.
Left to right: Revolution 3C, stock Maglite 2D, Revolution 3D
Same spec's as the original 3C model, but this one runs on 3x NiMH D cells. Using AccuEvolution LSD D cells, I get an estimated 3+ hours on direct-driven high (MrGman measured the 3C model at 757.4 lumens), ~33 hours on 300mA medium, ~200 hours on 50mA low. All this in a package that's only slightly larger than a stock 2D. (download's SS bezel and MagRingD are my additions.)
These Lambda Revolutions are my bump-in-the-night lights - the 3C sits on my bedside table, and the 3D is in the front hall closet - and combined with AccuEvolution LSD cells and a Maha MH-C808M charger, they are my hands-down favorite flashlights.
Left to right: Revolution 3C, stock Maglite 2D, Revolution 3D
I am not really happy with this build.
I used a H22A Mag C XRE heatsink and the beam has a dark spot in the middle
I need to figure a way to remove the XPGs, I used AA, without damaging it.
then shim the XPGs up a little.
Anyway, here are a couple of pics
Cut down Mag C with a Cfromc "Executive" bezel
Dual XPG-R4s, Linger Specials from Nailbender
Driven by SBs three mode 8 x 7135 board
1400mA per emitter :devil:
I used a H22A Mag C XRE heatsink and the beam has a dark spot in the middle
I need to figure a way to remove the XPGs, I used AA, without damaging it.
then shim the XPGs up a little.
Anyway, here are a couple of pics
Cut down Mag C with a Cfromc "Executive" bezel
Dual XPG-R4s, Linger Specials from Nailbender
Driven by SBs three mode 8 x 7135 board
1400mA per emitter :devil:
geoff538
Newly Enlightened
Where did you get the tail cap & lens?
Thanks,
Geoff
Thanks,
Geoff
I proudly present:
The Axe
http://www.candlepowerforums.com/vb/showthread.php?t=257840
My version of the M*g623 @ 14 cells and 175W
A 5 x XRE driven by 4 x 18650 in 2s2p
And last but not least the BigM*g 12D 140W monster
http://www.candlepowerforums.com/vb/showthread.php?t=247961
Oh did i mention that they're all homemade (Thats the fun part for me!)
The Axe
http://www.candlepowerforums.com/vb/showthread.php?t=257840
My version of the M*g623 @ 14 cells and 175W
A 5 x XRE driven by 4 x 18650 in 2s2p
And last but not least the BigM*g 12D 140W monster
http://www.candlepowerforums.com/vb/showthread.php?t=247961
Oh did i mention that they're all homemade (Thats the fun part for me!)
Purpleorchid
Newly Enlightened
Apologies for the thread hijack, but I can't seem to find the right subforum to ask this question, but you guys seem like the people who might be able to help me. My stock C Maglite lost it's rubber button switch cover. Where would I be able to find a replacement (if they are even sold)? Thanks!
