Sold/Expired Sinner Customs - Tri-EDC's and more - this run CLOSED

[DBCstm]

Re: Sinner Customs - Tri-EDC's and more.

Hey Sinner, I got my little Ti Tri-EDC 18350 and it's a beaut! Going for a bit more run time, I loaded it up with 3 XP-G2's with a mixed tint for a pure white output. I used a 1A, 2B and 3C and it works beautifully! Pulling 5.73A at the tail from the Purple Efest 18350. Niiiice! This equates to a little over 1500 lumens in my light box, with a moon mode of 0.41 lumens. But I can't leave well enough alone, as you probably know by now, so I customized it's appearance on the outside to go with all the goodies on the inside....

Very very happy with this latest addition to my growing Sinner collection. A Sinner for every occasion, that's my goal.

Thank YOU!

 

[recDNA]

Re: Sinner Customs - Tri-EDC's and more.

Gorgeous. Nice work

 

[oneinthaair]

Re: Sinner Customs - Tri-EDC's and more.

What's OTF on the XPL dedomed?

 

[gktii]

Re: Sinner Customs - Tri-EDC's and more.

wow!!! that looks amazing!

 

[sinner-cpf]

Re: Sinner Customs - Tri-EDC's and more.

Depending on the driver used the current is divided equally between the three emitters, with the Nanjg-105c 3.0a Driver they will produce 1100+ OTF whereas with a FET Driver, they pull a whole lot of amps on the turbo and high modes, Max i've seen OTF are 3126Lm, 10A+ from a Efest 18350 on a 3-XPL/FET combo.

What's OTF on the XPL dedomed?

 

[gktii]

Re: Sinner Customs - Tri-EDC's and more.

with a FET Driver, they pull a whole lot of amps on the turbo and high modes, Max i've seen OTF are 3126Lm, 10A+ from a Efest 18350 on a 3-XPL/FET combo.

this is what i'm looking for.. ;-)

 

[oneinthaair]

Re: Sinner Customs - Tri-EDC's and more.

this is what i'm looking for.. ;-)

+1 on that!!

 

[DragonHead]

Re: Sinner Customs - Tri-EDC's and more.

These look great! can I see a pic of the Pill?
Do they use a custom one? or a P60 base?
Thanks, H.

 

[Alex1234]

Re: Sinner Customs - Tri-EDC's and more.

Iv always wanted a Sinner Host and the one i got does not disappoint. Vinh got one of the ti hosts from another member and turned it into this. The quality of the machining is quite amazing. You do amazing work and cant wait to get another one. Im hooked

 

[mcbrat]

Re: Sinner Customs - Tri-EDC's and more.

These look great! can I see a pic of the Pill?
Do they use a custom one? or a P60 base?
Thanks, H.

It's custom, and It's about the same as a mac's edc pill, but it's different threading.

 

[gktii]

Re: Sinner Customs - Tri-EDC's and more.

Iv always wanted a Sinner Host and the one i got does not disappoint. Vinh got one of the ti hosts from another member and turned it into this. The quality of the machining is quite amazing. You do amazing work and cant wait to get another one. Im hooked

this looks amazing!!

 

[oneinthaair]

Re: Sinner Customs - Tri-EDC's and more.

Anybody have beam shots of any of these lights? I'd really like to see XPL dedomed.

 

[greenadam29]

Re: Sinner Customs - Tri-EDC's and more.

Pm sent

 

[oneinthaair]

Re: Sinner Customs - Tri-EDC's and more.

Can I order just a engine and optics?

 

[Vesper]

Re: Sinner Customs - Tri-EDC's and more.

I'm interested in any more photos of these lights that are available. Pic of the switch end, an engine. Maybe one with a clip attached. I don't yet have a good feel for the product. :duh2:

 

[oneinthaair]

Re: Sinner Customs - Tri-EDC's and more.

I have one coming in Monday I'll be snapping some pictures.

 

[Vesper]

Re: Sinner Customs - Tri-EDC's and more.

I have one coming in Monday I'll be snapping some pictures.

Thanks!

 

[emu124]

Re: Sinner Customs - Tri-EDC's and more.

I'm interested in any more photos of these lights that are available. Pic of the switch end, an engine. Maybe one with a clip attached. I don't yet have a good feel for the product. :duh2:

+1

Pic of an Tri 18350 with clip would be great! :wave:

 

[KuanR]

Re: Sinner Customs - Tri-EDC's and more.

 

[mcbrat]

Re: Sinner Customs - Tri-EDC's and more.

here's my copper tri with clip