-
You must be a Supporting Member to participate in the Candle Power Forums Marketplace.
You can become a Supporting Member.
Size of the Glow O-Ring used in the Ti-PD
- Thread starter bmstrong
- Start date
Help Support Candle Power Flashlight Forum
fyrstormer
Banned
You can buy glow-rings on Dealextreme. By my measurement, the front O-ring on the PD-S is 20mm inner diameter and 24mm outer diameter.
RocketTomato
Enlightened
- Joined
- Jul 20, 2008
- Messages
- 475
Sigman sells a bunch of different size glo-rings in the marketplace. You want the 1" size.
Sigman
* The Arctic Moderator *
I can't seem to get the earlier 1" Glow-Rings of thinner diameter. Last few times I received thicker ones, so I'm not sure if they would be too thick or not. They are pretty "stretchy", maybe a 7/8" would work???
All the other sizes are the same specs they've always been.
All the other sizes are the same specs they've always been.
Last edited:
bmstrong,
I've bought 0-rings from sigman in the past and I can part with a glow-o-ring that is ~1" OD - would appear to be the same as what I have in my Ti-PD. Drop me you address by PM & I can have it to the mail to you on Monday.
In the mail (Tuesday am).
If anyone wants to send (sell) me something I'm looking for 2 or 3 of the low-force PD springs...., I previously bought 3 but now have too many McGizmo PD lights....
Neale
I've bought 0-rings from sigman in the past and I can part with a glow-o-ring that is ~1" OD - would appear to be the same as what I have in my Ti-PD. Drop me you address by PM & I can have it to the mail to you on Monday.
In the mail (Tuesday am).
If anyone wants to send (sell) me something I'm looking for 2 or 3 of the low-force PD springs...., I previously bought 3 but now have too many McGizmo PD lights....
Neale
Last edited:
