• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

Sold/Expired SOLD: Bi-Flupic SSC P7 Aleph Light Engines

darkzero

Flashaholic* ,
Joined
Oct 7, 2003
Messages
4,459
Location
SoCal
For sale Bi-Flupic P7 CSXOI Aleph LEs as seen here. These have the simplified Draco UI v2 (Burst>User Set>Low>Nothing>Brighteness Setting 1-10). Also has memory (remembers last setting used). Bi-Flupic is fully potted in the escan with thermal epoxy. Brass battery contact so there is no worry of a solder blob going flat or oxidized over time.

Max (level 10): 1.6A
Burst w/ R123: 2.0A
Burst w/ 17670: 2.5A
Burst w/ 18650: 3.0A
(Your results may vary depending on battery)

Because of high current draw & high heat on burst I am not liable for battery damage or overheating. I do not recommend using burst continuously with a R123. I do not recommend using burst continuously if used in a host with very little mass because of heat. I recommend AW li-ions for best performance.

I currently have two available. All Sold, Price is $170 ea. + $3 standard worldwide shipping.

"I'll take it" gets it. Paypal only, fees included. Priority shipping is extra & insurance is not included. I am not responsible for lost packages.
Free shipping for Paypal cash payments.



Img_5082.jpg


Img_5085.jpg



:wave:
 
Last edited:
Re: FS: Bi-Flupic SSC P7 Aleph Light Engines

I'll take one. Put it on my tab. :)
 
Re: FS: Bi-Flupic SSC P7 Aleph Light Engines

PM sent.
EDIT: :takeit: , I'll send Paypal as soon as I hear back from erinO919 and TranquilityBase, but I understand the 24-hour Paypal rule. If you don't hear anything back from me at the end of 24-hours, then I'll assume this second LE will be reavailable for sale, and I'll post accordingly here. Thanks again Will for all the help.:)

Ok, no problem, I'll give you till tomorrow night. If you still don't get your answer by then let me know, I'm understanding.
 
Re: FS: Bi-Flupic SSC P7 Aleph Light Engines

Will, you are top notch in my book and others aswell...!

Thanks for making these available.....:thumbsup:
 
Re: FS: Bi-Flupic SSC P7 Aleph Light Engines

This LE is still available for sale. I was going to buy it, but can't find a Ti host to put it in anywhere, so regrettably, I'll have to pass. Good luck to the new buyer.
 
Re: FS: Bi-Flupic SSC P7 Aleph Light Engines

This LE is still available for sale. I was going to buy it, but can't find a Ti host to put it in anywhere, so regrettably, I'll have to pass. Good luck to the new buyer.

Thanks. Sorry it did not work out for you.

Last LE is currently on hold.
 
Last edited:
Re: FS: Bi-Flupic SSC P7 Aleph Light Engines

brighterisbetter, it might be worth PMing bogus1 or having a look at the
TNC products forum.

From what I understand, TNC have made some long 27mm heads.
If you have a McR27XR reflector in one of these heads, then providing
the spacing is correct with the lens, o-ring and bezel-retaining ring,
then the SSC P7 Aleph Light Engine should work with this combination.

However please check with bogus1. I don't want to give you any misleading
or incorrect information.
 
My Bi-Flupic arrived today.:party::drool::party:

The output is great, and the build quality is astounding.

Will - your work is absolutely superb. :bow::bow:


I'm so pleased I was able to get this one.:D

Colin.
 
Darn it! When did this happen? Stupid education is detracting from all my cpf time.:mecry:
 
Top