Sold/Expired (Sold) BitZ Pocket Titanium Prototypes

[HgRyu]

BitZ Pocket Titanium Prototype





Specification

• Material : Titanium Alloy (6AL-4V) bezel, head and body
• Finish : Blast, ZrN(light gold color), TiN(gold color)
• Lens : Sapphire Crystal Glass, optical grade
• LED : SSC P4 bin - U2SWOH
• Driver : Buck-Boost converter with 3 regular brightness levels and 4 hidden signals.
• Reflector : High quality Orange Peel aluminium reflector
• O-ring sealed Twist On-Off (no battery rattle)
• Battery : One 3V CR123A or one 3.6V RCR123A (recommend AW's protected Li-Ion cell)
• Dimension: Diameter 21mm, Overall Length 72mm
• Accessories : Titanium Pocket Clip, 2 Split Rings (one stainless steel, one brass)
• Pocket Ti have modular led system so you can upgrade led or led module later.
• No commercial packing

Driver and Brightness levels, Hidden Signals

• BitZ Pocket use Buck-Boost converter and it will control power to the LED even though you use 3.6V rechargeable Li-Ion battery. So, LED will not be damaged by unregulated high current from Li-Ion battery. Off course, birightness by regular 3V CR123A and 3.6V rechargeable Li-Ion battery will be same.
• Input voltage range : 1.8V ~ 5.5V
• There are basic 3 Brightness levels (Medium-Low-High) and hidden 4 Signals (Strobe-Locater-Extreme Low-S.O.S.)
• Brightness (estimated) : High (120~130lumen), Medium (30~40lumen), low (10lumen)
• Current to LED (tested) : High (500mA), Medium (150mA), Low (30mA)
• Rumtime (tested) : High (1~2 hours), Medium (3~6 hours), low (12~24 hours) depending on 3V or 3.6V.
• Runtime for Signal mode (RCR123A, CR123A) : Strobe (8, 12 hours), Locater (24, 36 hours), Ext.Low (45, 70 hours), S.O.S. (8, 12 hours)
• Basic 3 brightness levels has Memory Function. You will get next level by Off and On within two seconds.
• You will get into Signals by consecutive 8 On and Off. No memory function for Signal.
• Locater signal : useful mode for tracking and camping as "follow me" signal or location signal.
• Extreme Low : This mode is useful as a overnight candle at tent. Current to LED is 10mA.

Caution : Do not use pocket clip for belt. Pocket clip don't have enough strength(tention) and room for thick leather belt, use clip just for thin fabric pocket.






Price and terms,

1. Price is U$260 for blast, U$280 for ZrN, TiN
2. Shipping via airmail to everywhere at U$5.
   I'll ship via registered airmail if your post office have tracking service. (not available to USA, USPS don't have airmail tracking)
   If you want shipment via EMS(tracking), actual shipping will be applied (FYR, cost will be U$22 to US, U$20 to Europe, U$15 to Japan and China)
3. Payment to [email protected] via Paypal or Western MO.
4. Please add your "CPF ID" on your Paypal details.
   Please mark "registered airmail" if your post office have tracking service.
5. Post here "I'll take # ?" and will have priority.

#1. Blast ZrN - starfiiretoo​

#2. Balst TiN - sold
#3. Blast - bmstrong
#4. Blast - easilyled
#5. Blast - luxlunatic
#6. Blast - bugoutgearusa
#7. Blast - Peter Atwood​

Some pictures and details,​

Runtime Graph,

Thanks.​

 

[easilyled]

Re: BitZ Pocket Titanium Prototypes

I 'll take it #4 but without blasting if possible.
(Just normal Titanium machine finish)

If this is not possible, then I'll have the blasted Ti finish

 

[BugOutGear_USA]

Re: BitZ Pocket Titanium Prototypes

PM Sent for one blast finish. PP Sent.

Thanks,
Flavio
BugoutGearUSA.com

 

[luxlunatic]

Re: BitZ Pocket Titanium Prototypes

for Blasted #5!

 

[starfiretoo]

Re: BitZ Pocket Titanium Prototypes

#1. Blast ZrN - $285 :goodjob: :thanks:

 

[octaf]

Re: BitZ Pocket Titanium Prototypes

Hmm...
That was darn quick !

I heard that this Bitz will not be produced in 6-4 Ti anymore, so these will be one of those "rare stuff".

Good luck with your sale, HgRyu ! :twothumbs

 

[Peter Atwood]

Re: BitZ Pocket Titanium Prototypes

Payment sent for a ZrN coated one. But now I see that maybe you just have seven lights available and the ZrN one may be goen already. I'll take blasted then if ZrN is not available. Thanks!

 

[skcheng]

Re: BitZ Pocket Titanium Prototypes

I'll take one Blast Finish if still available. PM Sent.

 

[Cuso]

Re: BitZ Pocket Titanium Prototypes

Payment sent for a ZrN coated one. But now I see that maybe you just have seven lights available and the ZrN one may be goen already. I'll take blasted then if ZrN is not available. Thanks!

Celebrity in the house!!!

 

[Edwood]

Re: BitZ Pocket Titanium Prototypes

If these make it to production, please make bare machined finish (no bead blasting) available.

Love the smoother finish. I'm not a fan of aggressive knurling.

 

[LED Zeppelin]

Re: BitZ Pocket Titanium Prototypes

I"ll take one if there is one still available.

Please confirm and I'll send PP, Thanks.

 

[Joseph Milton]

Re: BitZ Pocket Titanium Prototypes

I'll grab one!

PP sent for $265

PM incoming too.

Joseph

 

[easilyled]

Re: BitZ Pocket Titanium Prototypes

HgRyu, please could you check your PMs regarding my postal address.
Thanks, Daniel

 

[white light]

Re: BitZ Pocket Titanium Prototypes

I'll take one TiN finish please or anyone that is left, let me know if still available before I send PP,
Thanks

 

[bmstrong]

Re: BitZ Pocket Titanium Prototypes

Just sent PP. MANY THANKS!!!!

 

[Cuso]

Re: BitZ Pocket Titanium Prototypes

Whats the hole for??Is it some kind of screw?? If you make a production version of this, you will be loved by all..

 

[octaf]

Re: BitZ Pocket Titanium Prototypes

Whats the hole for??Is it some kind of screw?? If you make a production version of this, you will be loved by all..

Yes, it is, but not meant to be opened.
I heard the production version will be in 'Grade2' Ti, if HgRyu decides to put them out. I hope he does ! I'm waiting for them myself.
I think the quality of the work and the price is "excellent". :wave:

 

[HgRyu]

Re: BitZ Pocket Titanium Prototypes

Thanks all !

I just shipped flashlights as below.

#1. Blast ZrN - starfiiretoo - shipped via airmail
#3. Blast - bmstrong - shipped via EMS tracking# EM882955794KR
#4. Blast - easilyled - shipped via registered airmail #RR026961473KR
#5. Blast - luxlunatic - shipped via airmail
#6. Blast - bugoutgearusa - shipped via airmail
#7. Blast - Peter Atwood - see below.

Tracking here http://service.epost.go.kr/iservice/ems/ems_eng.jsp​

Payment sent for a ZrN coated one. But now I see that maybe you just have seven lights available and the ZrN one may be goen already. I'll take blasted then if ZrN is not available. Thanks!

Thanks Peter, would you want refund balance U$20 ? If you confirm refund, I'll refund U$20 and ship blast to you tomorrow.

HgRyu, please could you check your PMs regarding my postal address.
Thanks, Daniel

Shipped light to your address as per your PM.

Whats the hole for??Is it some kind of screw

Yes, it's just for screw driver. But it's not for open. You don't need and don't have to open the tail screw.

 

[Peter Atwood]

Re: BitZ Pocket Titanium Prototypes

Yes, I will gladly take the blasted one, many thanks! Please refund the extra $20.

Question: Will these lights come apart completely? I might like to anodize mine if I can get the guts out easily.

 

[easilyled]

Re: BitZ Pocket Titanium Prototypes

Yes, I will gladly take the blasted one, many thanks! Please refund the extra $20.

Question: Will these lights come apart completely? I might like to anodize mine if I can get the guts out easily.

I'd also like to know if they come apart easily as I might want to polish the Ti.