Sold/Expired SPF: 1C P7 Mag DSWOI, 8x7135 price drop

[olrac]

SPF: 1C/1-18650 Mag, P7 DSWOI, 8xAMC7135

C Mag host machining by MirageMan
8xAMC7135 driver by DarkZero
P7 DSWOI and Heatsink by Britelumens
MOP Metal reflector by KD
Clear glass lense by DX

Blinding you friends.........Priceless....or $125 $115
Great throw and no donut hole

AW C cell available with purchase of light for $25

Shipped 1st class mail conus, international for actual extra cost, insurance available for cost. first "I'll take it" gets it. MO or non CC Paypal

 

[olrac]

Re: FS: 1C P7 Mag DSWOI, 8x7135 price drop

 

[olrac]

Re: FS: 1C P7 Mag DSWOI, 8x7135 price drop

:wave:bttt

 

[olrac]

Re: FS: 1C P7 Mag DSWOI, 8x7135 price drop

:bump:

 

[waddup]

Re: FS: 1C P7 Mag DSWOI, 8x7135 price drop

single mode or more then 1?

 

[olrac]

Re: FS: 1C P7 Mag DSWOI, 8x7135 price drop

single mode regulated

 

[Litbobber]

Re: FS: 1C P7 Mag DSWOI, 8x7135 price drop

Whats the lumen output and run time on this?

Thanks

 

[olrac]

Re: FS: 1C P7 Mag DSWOI, 8x7135 price drop

See post below

Thanks bigchelis

 

[bigchelis]

Re: FS: 1C P7 Mag DSWOI, 8x7135 price drop

Whats the lumen output and run time on this?

Thanks

I actually know the exact number out the front with my 1D P7 built by Nailbender, but he used a D size heatsink which is bigger and from what was just tested in MrGmans IS Sphere you loose about 100 lumens going down to a C size heatsink.

Anyhow the same P7 bin with AW 2600mAh cell or IMR 18650 cell made:

Nailbender P7__________,__1D Mag, IMR 18650________________710.3______0 sec_______,
Nailbender P7__________,__1D Mag, IMR 18650________________659.8_____15 sec_______,
Nailbender P7__________,__1D Mag, IMR 18650________________639.3_____30 sec_______,
Nailbender P7__________,__1D Mag, IMR 18650________________628.0_____45 sec_______,
Nailbender P7__________,__1D Mag, IMR 18650________________620.6_____60 sec_______,
Nailbender P7__________,__1D Mag, IMR 18650________________615.0_____75 sec_______,
Nailbender P7__________,__1D Mag, IMR 18650________________611.2_____90 sec_______,
Nailbender P7__________,__1D Mag, IMR 18650________________607.5____105 sec_______,
Nailbender P7__________,__1D Mag, IMR 18650________________603.7____120 sec_______,
Nailbender P7__________,__1D Mag, IMR 18650________________598.1____150 sec_______,


Please note that the P7 I had MRGman test was a Direct Drive version and this 1C Mag has a 2.8A driver which from our testing will likely give you more out the front or help. Gene Malkoff drives his Mag drop-ins at 2.8A too at the LED and I agree that 2.8A is the most efficient for these Mag P7 builds.


Free bump and I wish I had the extra cash for a very awesome light. Good luck on the sale.

 

[Litbobber]

Re: FS: 1C P7 Mag DSWOI, 8x7135 price drop

I'll take it,does this come with a 18650 battery sleeve?
Please pm me with your address so i can send you out a pomo.

Also thanks bigchelis for your post,great info.

Brett

 

[olrac]

Re: FS: 1C P7 Mag DSWOI, 8x7135 price drop

SPF to Litbobber
PM sent:wave: