SPY Tri-V Sales thread #3 is now Closed

[fyrstormer]

Similar design elements notwithstanding, the 005/007 are much more conventional in the sense that they are still multi-mode single-beam flashlights. The addition of multiple emitters with different beam profiles, and the ability to combine them in various ways, makes the Tri-V a distinctly different animal, even if it uses the same switch and battery compartment. I like the way the 007 looks, but it was the completeness with which the Tri-V discards the paradigm of normal flashlights that really caught my attention.

 

[chipwillis]

Look insde on the board there is a + so you know whic way the battery goes.

 

[fyrstormer]

Oh hey, look at that.

In my defense, they're not very easy to see. But whatever, it's not exactly a big deal. Now I know.

 

[run4jc]

There is joy in Arlington, VA!! And it came with a lanyard already attached and a couple of beads...

The unveiling..:

I didn't get Diet Coke...I got regular😀

Pretty little box...

Still digging - the anticipation is such that I really didn't want to take the time to take photos!

And here she is!! Tri-V #0446

Happily reunited with Spy 007 # 257

I brought a couple of AWs to work with me - popped 'em in and fired 'er up. Holy cow, it is amazing. I just can't wait for the dog walk in the morning in the darkness! It's perfect! Thank you Dave!!

 

[scout24]

😀 That is the look I am going to be trying hard to wipe off my face for a while, I am sure. I had the distinct pleasure of picking #0443 up in person at Dave's late this morning. I am absolutely floored by this beauty. After seeing the workshop and equipment, I am still trying to wrap my head around the amount of work, time and effort that must have been needed to bring these to the light of day. Even with Dave explaining in big, simple words, holding some of the parts and pondering my completed light left me at a loss. Anyone who thinks this is anything but a labor of love on Dave's part is mistaken, in my opinion. I was able to see Dave's "beater/EDC" 007, and if I recall, he said it was the first Ti body he made. Holding up beautifully, all the scratches seem to blend together at some point, and almost looks as good as new... I wish to thank Dave for his hospitality and time, and for the chance to meet him, have the tour, and see what goes into these works of art. I am pretty sure I didn't put it down the whole ride home! :bow: I know I posted this photo in the Registry, but here it is again!

 

[fasteddie]

I also put markings on the battery cap to indicate up and down, it is quite easy to get confuse sometimes.

The battery compartment opening button goes on the same side as the lanyard attachment. Only took me 3 generations of spys and how many years to figure that one out?

 

[fyrstormer]

Maybe the SPY 009 could have an instruction manual etched onto the side, and a flip-out magnifier to help you read it.

Nice sig line, fasteddie. 😎 Though, wouldn't it be "Trés Vs"?

 

[Incidentalist]

😀😀😀😀!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

 

[jslappa]

All Dave has to do is convert the instructions over to a microfiche, invert the text, and glue it to the Asphere LED dome. Then we could just shine the instructions on the wall!

I've been playing with my Tri-V all day now, and I still can't believe the level of craftsmanship, attention to detail and bleeding-edge tech that went into this light. One member sent me a PM asking me what I thought, and whether it was worth the $. Now that the new-ness of it has worn off, and I have introduced it to the rest of my lights, I can honestly say YES. This light is absolutely worth every penny I paid. Three beam profiles in one light? the ability to program 6 levels, any combination of LED's, and 4 personal configurations? Fully upgradeable LED's and software? fits in the palm of you hand, runs on 2 of any 123-style batteries you like? titanium, Hand built and tested? damn right it's worth $2k.

 

[JoeB42]

I feel like a kid in a candy store. Mine arrived safely. Congrats Dave, this thing is out of this world. After months of anticipation, well worth the wait. Can't wait to play with it tonight. JoeB42:twothumbs

 

[jamespjc]

Ok..so I am probably very thick, but I just can't get the battery cover off. I depress the pin, and try to pull but no luck. Which way am I supposed to pull? Or do I slide?

 

[scout24]

Jamespjc- With pin depressed, cap will pull off toward bottom of light. No spring tension without batteries, may take a good tug. Be sure to support it when there are already batteries in there, though, it will pop off with a good bit of force.

 

[run4jc]

It's been said already - the question, "is it worth it?"

Darn right.

I just can't get over it. After reading Scout's post, I wish I would have made the pilgrimage to PA to "the workshop" to have seen where it all happens. Thanks for reporting, Greg!!

As Scout24 said, "words escape me!" Rarely have there been purchases - especially of this magnitude - where there was NO 'post purchase dissonance'....this is one of those cases. NO regrets!

After setting the light to the second memory bank and programming different settings, I am just amazed - yet I've retained the default settings for bank 1 and frankly, Data must have read my mind for what my needs would be when he set them up.

Still, the aspheric set to 2000mA is amazing....:devil:

Bravo, Dave. And it was worth EVERY dime! This weekend the macro lens goes on the camera, lots of photos will be taken, and a review from this happy owner is forthcoming! :twothumbs:twothumbs

 

[derangboy]

Still, the aspheric set to 2500mA is amazing....:devil:

How did you manage this? 😱

 

[run4jc]

How did you manage this? 😱

I didn't - I misspoke - the limit is 2000mA, so let me rephrase,
"The aspheric at 2000 mA is amazing!"

😱

Sorry!

 

[Data]

Ok..so I am probably very thick, but I just can't get the battery cover off. I depress the pin, and try to pull but no luck. Which way am I supposed to pull? Or do I slide?

see this video

When there are no batteries in the light there is no force pushing the battery cap off. It is easy with three hands: one holding the light, one pulling on the battery cap and one pushing the release pin in. 😛


Cheers
Dave

 

[jamespjc]

Thank you Scout24 & Dave I got it. I hadn't realized how substantial the battery cap was. Felt a bit silly, but that was soon forgotten when I started to run the light through it's paces

 

[ninemm]

Congrats to all the new owners!! The pics and comments are appreciated by us flashaholics that live vicariously through you all! :laughing:

 

[Deleted member 14754]

Quick question...inside the plastic container are 4 very small plastic beads. 3 are black and 1 is clear. What are they for? I also bought the GPA, do the go with that?

Those little beads can be used to press against the battery cap release button.

 

[fyrstormer]

Okay, I have a suggestion to make, which applies to all SPYs, not just the Tri-V. I don't want to use a lanyard, and the first thing I did was take mine off. This means the opening bead isn't going to work for me. I do, however, have a tiny pen and a folding knife with tips small enough to press the release, but it's very easy for them to slip off. A tiny dimple machined into the center of the release would make it much easier to use small pointy objects to open the battery compartment, while still allowing the opening bead to be used for those who prefer it.