I'll have the first run completed in the next week or so. This is the 2nd run and is limited to 20 lights. This will be a pre-pay. These lights will be identical to the first run lights except for the reflectors. I'm using a new 20mm reflector that is slighly deeper which makes the head .100 (one tenth of an inch or 2.5mm) longer. The beams between both reflectors are 99% identical. The newer reflector may throw ever so slightly better.
Choices
Base Light Bare Aluminum $150
Base Light Titanium $300
Titanium Clip Option $30 for either Light
Shipping $5 US $13 International via Priority Mail
Driver Board Options
3mode Low-Med-1400mah High
3mode Low-Med-2800mah High *IMR CELL REQUIRED Intermittent use on High*
5 mode Driver Low 150ma-Med 650ma -High 1.2a-Strobe-SOS
First Run Link
http://www.candlepowerforums.com/vb/showthread.php?t=242182
Pre-Payment can be sent to [email protected] You *MUST* include your CPF username and options you want.
Titanium Light with Clip
Light Engine's
Choices
Base Light Bare Aluminum $150
Base Light Titanium $300
Titanium Clip Option $30 for either Light
Shipping $5 US $13 International via Priority Mail
Driver Board Options
3mode Low-Med-1400mah High
3mode Low-Med-2800mah High *IMR CELL REQUIRED Intermittent use on High*
5 mode Driver Low 150ma-Med 650ma -High 1.2a-Strobe-SOS
First Run Link
http://www.candlepowerforums.com/vb/showthread.php?t=242182
Pre-Payment can be sent to [email protected] You *MUST* include your CPF username and options you want.
Titanium Light with Clip
Light Engine's
Last edited: