Surefire® Modification Service: Bore + Bezel + Tailcap Options (P, C, Z and M Series)

[qmtu]

CPF: qmtu
borebatch 62, elzetta 2 cell, $20

Thank you.

 

[qmtu]

CPF: qmtu
Withdrawing my name from the list. I just bought one. Thank you.

 

[JoeAsheville]

CPF: JoeAsheville

BB P63 SF 6P A522456 $19
BB P64 SF 6P A601215 $19
BB P65 SF 6P A477531 $19

This is much less ambitious than what I had previously planned for BB O!

Times are much better now...you were right, they turned around.

However, anything more will have to wait for BB Q. Thanks -

 

[harm]

Re: 18mm Bore Services: Surefire P and C series

CPF: harm
borebatch - P65 - C2 - $23

 

[harm]

Re: Surefire® Modification Service: Bore + Bezel + Tailcap Options (P, C, and Z Serie

CPF - Harm
Borepatch - P66 - 6PX $28

 

[f1prb22]

CPF: F1PRB22
borebatch - P67 - 9P - $22

 

[DRoc]

Re: Surefire® Modification Service: Bore + Bezel + Tailcap Options (P, C, and Z Serie

Please add one more 6P and one more C2/M2 (whatever I can find) body to my list.
Looks like 68 and 69.

 

[qmtu]

Please put me back in the list
CPF: qmtu
#70 Elzetta Bravo $20

 

[k-b]

CPF: k-b
borebatch - P71 - 6PX - $28

 

[qmtu]

We've got more 70 on the list.
Any chance of a run soon?

 

[ElectronGuru]

Yes, we have enough units to go, so its a pure logistics question now.
We strive not to go until we can insure minimal delays.
So its important the shop etc are lined up!

 

[mckeand13]

Yes, we have enough units to go, so its a pure logistics question now.
We strive not to go until we can insure minimal delays.
So its important the shop etc are lined up!

When will you be closing this batch? I need to decide if I want to get in on this, but I don't want to miss it.

Thanks.

 

[ElectronGuru]

Re: Surefire® Modification Service: Bore + Bezel + Tailcap Options (P, C, and Z Serie

Ideally within the next 6 weeks

 

[houstonnightlight]

Re: Surefire® Modification Service: Bore + Bezel + Tailcap Options (P, C, and Z Serie

I am in for 4:

HoustonNightLight

borebatch - P71 - 6P - $19
borebatch - P72 - 6P - $19
borebatch - P73 - Z2 - $22
borebatch - P74 - C2 - $23

 

[delus]

Re: Surefire® Modification Service: Bore + Bezel + Tailcap Options (P, C, and Z Serie

I assume there will be some bored Elzetta Bravo bodies in stock after this batch is run. Otherwise I have to order from elzetta right now, so I can send them to you when the batch starts.
Will there be Bravos in stock after this run?

 

[ElectronGuru]

Re: Surefire® Modification Service: Bore + Bezel + Tailcap Options (P, C, and Z Serie

I assume there will be some bored Elzetta Bravo bodies in stock after this batch is run. Otherwise I have to order from elzetta right now, so I can send them to you when the batch starts.
Will there be Bravos in stock after this run?

Yes and yes. You can send in a Bravo with this batch and I will be running enough new bodies through to restock avs, host, and body only options. Each will be ready at about the same time.

 

[harm]

Re: Surefire® Modification Service: Bore + Bezel + Tailcap Options (P, C, and Z Serie

I want to have my 6PX done and figured I'd get the bezel & head off ok. But for the life of me I can't figure it out. Dumb question, any ideas?

 

[ElectronGuru]

Re: Surefire® Modification Service: Bore + Bezel + Tailcap Options (P, C, and Z Serie

Some things are easier said than done. X series are designed not be modified.

See if this helps:
http://www.candlepowerforums.com/vb/showthread.php?326058-Surefire-6PX-Pro-head-removal-made-easy

 

[jd1911]

Re: Surefire® Modification Service: Bore + Bezel + Tailcap Options (P, C, and Z Serie



CPF: JD1911
borebatch - P75 - P2X - $28
borebatch - P76 - Z2 - $22
borebatch - P77 - Z2 - $22
borebatch - P78 - Z2 - $22

 

[ElectronGuru]

Announcements:

Batch P is closing this Friday. Last call for Batch P!
Batch Q is scheduled for 2017
Batch Q will have higher prices​