Surefire Yuji 5mm 3200k MN01

euroken

Flashlight Enthusiast
Joined
Dec 26, 2008
Messages
1,539
Location
Washington
Hey guys,

What do you think?

KdeLiJy.jpg

xD98CK4.jpg


I just recently had a MN02 blow out on me so I thought I'd try something. Saw that 5mm LED appeared to be close in size. After spending about 15 min sanding down the 'lip' on the LED, I did my best to solder up the leads and voila!

It can only run on CR123 as there is no driver on this one.

It's good 2 to 3 floody lumens perhaps.

Suppose I can play with the LED focusing.

Great for a bedside e-series!
 

DrafterDan

Flashlight Enthusiast
CPF Supporter
Joined
Jul 28, 2013
Messages
1,306
Location
Phoenix, AZ
Okay, that's a great idea. I had purchased a few recently, but without any ideas for what to do with it. I'll see about making this happen on an E-series lego I have sitting on the shelf

~D
 

euroken

Flashlight Enthusiast
Joined
Dec 26, 2008
Messages
1,539
Location
Washington
Okay, that's a great idea. I had purchased a few recently, but without any ideas for what to do with it. I'll see about making this happen on an E-series lego I have sitting on the shelf

~D

Awesome!

just make sure you’re running only a single cr123 :)
 

iamlucky13

Flashlight Enthusiast
Joined
Oct 11, 2016
Messages
1,140
bla2000, yes it should be. 5mm LED's are all very similar in external dimensions, and the legs have the same spacing. It might require some sanding like euroken's mod, but otherwise, that should be a good choice.
 
Top