Sold/Expired Surefire Z41 Judco 10A Switch

DellSuperman

Flashlight Enthusiast
Joined
Dec 5, 2012
Messages
1,760
Location
Singapore
I'd be Interested if one is available.

Please let me know, thanks!!

--Matt

Hi Matt,
Thank you for the interest but the current batch have all been taken up.

So far there have been some interest.
If the numbers add up, I will definitely make a 3rd round & you will be in the list.

Cheers
 

DellSuperman

Flashlight Enthusiast
Joined
Dec 5, 2012
Messages
1,760
Location
Singapore
I'd be Interested if one is available.

Please let me know, thanks!!

--Matt

Matt, I have created another thread to check on the interest for these switches.
It is located here.

I have put your name up there as one of the interested party & lets see how it goes from here shall we?
Thank you..
 

DellSuperman

Flashlight Enthusiast
Joined
Dec 5, 2012
Messages
1,760
Location
Singapore
All orders except those with special arrangements have been fulfilled.
Thank you all for your support.

There is another thread that I have started for another batch of switches.
 

DellSuperman

Flashlight Enthusiast
Joined
Dec 5, 2012
Messages
1,760
Location
Singapore
Mine are here, Thanks!
Got to get used to that reverse clickie...
Auto
Thanks for letting me know.
I had the same thought when i first use & the problem now is i donno which lights is using forward & which are using reverse clicky. Haha..

But one thing for sure, reverse clicky is very useful when using with programmable drivers. Absolutely a breeze for me.
 

Louis0921

Newly Enlightened
Joined
Mar 24, 2018
Messages
1
Some other information:
I had needed some high current clicky switch for my direct drive lights & decided to try Tana's method of modding the Judco 10A switch to fit a Surefire Z41 tailcap.
I bought 10 switches to build 2, in case I fail big time...:eek:oo:

So long story short, I have managed to make the 2 pieces that I needed (HURRAY) & now I still have several spares parts lying around.
After checking with Tana, he has allowed me to sell my extras switches.

Link to Tana's original build thread

Actual usage:
The first 2 piece that I have made for myself have been used over a week on my direct drive P60 XM-L dropin & Vinh CQvn with no issues.
It has been put into & removed from the tailcap several times & the switch has held it place without budging.

When screwing in the switch, use a long nose pliers & hold the switch on the side.
Stop tightening once you feel sufficient resistance from the rubber boot being compressed.
Do not over tighten as it may potentially dislodge the switch.

Parts used:
Judco 10A switch
Spring: Top diameter 4mm, base diameter 6.6mm, height 6.2mm, line thickness 0.6mm
Brass McClicky retaining ring
Fujik thermal epoxy --> Selley's 2 Part Epoxy

Sales Information:
** Disclaimer **
The listing is based on a first come first serve basis (PM or on thread).
As I will be making these switches after work, I will probably be able to complete 1 to 2 pieces at a time, hence it will take time & they will be sent to those names based on numerical order.
The ETA is a rough estimate since I am buying parts from various sources & their shipping time are different.

** Payment & Shipping **
I will not accept any payment upfront or deposit till the switches are ready to be shipped.
I will contact you via PM when your switch(es) are ready & prompt payment is appreciated.

Shipping address is based on Paypal address, so please send the correct address.
Shipping with tracking is $5 (flat rate) unless it exceed the amount by too much.

Batch 0:
Hiro Protagonist *paid & shipped*

Batch 1 (5 pieces): ETA Early Jan 16
1 *anonymous* *paid & shipped*
2 *anonymous* *paid & shipped*
3 Nbjly *paid & shipped*
4 KellyGlanzer *paid & shipped*
5 KellyGlanzer *paid & shipped*

Batch 2 (14 pieces): ETA Mid-end JAN 16
1 Nfetterly *paid & shipped*
2 Nfetterly *paid & shipped*
3 Monanza *paid & shipped*
4 Monanza *paid & shipped*
5 Monanza *paid & shipped*
6 Jmoyat *paid & shipped*
7 FatRat *paid & shipped*
8 jso902 *paid & shipped *
9 KuanR *paid*
10 Autogiro *paid & shipped*
11 Autogiro *paid & shipped*
12 Father Azmodius *paid & shipped*
13 Father Azmodius *paid & shipped*
14 DrafterDan *paid & shipped*


Are you still selling these tailcaps? I need one for a surefire 6p bored out to fit a single 18650 and I have a malkoff 3 mode (low,med,high) drop in.
 

lightknot

Flashlight Enthusiast
CPF Supporter
Joined
Apr 8, 2009
Messages
3,226
Location
Tucson, AZ USA
Louis0921 Doubt it, as DellSuperman's last post in this thread was over two years ago.

Welcome to CPF, By the way!
 
Top