Test/Review of Keeppower 14500 840mAh (Black) 2014

HKJ

Flashaholic
Joined
Mar 26, 2008
Messages
9,715
Location
Copenhagen, Denmark
[SIZE=+3]Keeppower 14500 840mAh (Black) 2014[/SIZE]


DSC_4868.jpg

Official specifications:
  • 14500 840mAh Protected Rechargeable Battery
  • Min Capacity: 750mAh
  • Typical Capacity: 840mAh
  • Normal Voltage: 3.7V
  • High Discharge Rate (Max 2C)
  • Protection Circuit (Against overcharge, over discharge, over current and short-circuit.)
  • 4.2 volts max voltage and 3.6-3.7 volts nominal voltage.
  • Over 500 charge-discharge cycles
  • Size: L:52.50mm*D:14.25mm
  • Cell: Sanyo UR14500P

Keeppower%2014500%20840mAh%20(Black)%202014-info.png


Keeppower has two 14500 batteries in their program, this is the one from Sanyo (The other cell is from DLG and is marked 800mAh).

DSC_4867.jpg


DSC_4869.jpg
DSC_4870.jpg


DSC_4871.jpg

DSC_4872.jpg


Keeppower%2014500%20840mAh%20(Black)%202014-Capacity.png


The battery is fairly constant in capacity up to nearly 2A.

Keeppower%2014500%20840mAh%20(Black)%202014-CapacityTimeHours.png


Keeppower%2014500%20840mAh%20(Black)%202014-CapacityTime.png


Keeppower%2014500%20840mAh%20(Black)%202014-Energy.png


Keeppower%2014500%20840mAh%20(Black)%202014-PowerLoadTime.png


Keeppower%2014500%20840mAh%20(Black)%202014-TripCurrent.png


This battery has higher protection trip current than last time I tested it.

Keeppower%2014500%20840mAh%20(Black)%202014-Charge.png




[SIZE=+3]Conclusion[/SIZE]

I have tested this battery once before (That time is was marked 800mAh) and got exactly the same discharge curves.
This is not very surprising with a Sanyo cell inside, this can only be a very good battery, even with the slightly high protection trip point.



[SIZE=+3]Notes and links[/SIZE]

The batteries was supplied by Keeppower for review.

How is the test done and how to read the charts
How is a protected LiIon battery constructed
More about button top and flat top batteries
Comparison to other LiIon batteries
 
Don't have a ZL 14500 so can't compare, but the button top does not protrude very far on the Keeppower. Having said that, this battery is just long and/or thick enough that it will not work in several of my older 14500 lights: Jetbeam RRT-0, 4Sevens Quark AA, Peak El Capitan. Nor does it fit in my L3 Illumination L10. It does work in my Nitecore SRT-3, but that's it for my lights. Back to AW's for me.
 
Top