The Malkoff Front Porch

So I did end up getting this drop-in. However, I had an issue where there was intermittent flickering when on low using the MD2. As such, I ended up sending it back and exchanging it for the last M61NH 519a 3500k.

Regarding the tint, it personally wasn’t my thing as I’m in the ~4500k and below but based on pictures I can say that I like 519a on 5700k better than what I had. Also, as many of you know. With the dome less emitters, there were beam artifacts which I expected going into it.
 
I recently got the FFL 5k installed in my reylight Lanapple. For me personally, I love it. I found the tint to be phenomenal. I'd love to have this led in an MDC 1-2v AA or CR123 version with 3 mode
IMG_1846.jpeg

IMG_1849.jpeg
 
Last edited:
Yeah I find it odd there is not one post on CPF, reddit, or even BLF

I was a bit hesitant to jump into a Malkoff drop-in with an emitter from a newer Chinese manufacturer, and if @JP031716 's experience is more generalized, I'm guessing a lot of people maybe were less-than-impressed, and so just chose not to post versus posting something negative.

I think with both Kosen and Malkoff being small businesses, I can understand people not wanting to say or post anything that could be detrimental (I think most of us like the Kosen specials, and would like them to continue).

So I did end up getting this drop-in. However, I had an issue where there was intermittent flickering when on low using the MD2. As such, I ended up sending it back and exchanging it for the last M61NH 519a 3500k.

Regarding the tint, it personally wasn't my thing as I'm in the ~4500k and below but based on pictures I can say that I like 519a on 5700k better than what I had. Also, as many of you know. With the dome less emitters, there were beam artifacts which I expected going into it.

That was my other concern; I am 100% in the <4500K club, too. 5000K CAN be tolerable, but it's not preferable.

Beam artifacts are interesting, because Malkoffs tend to be "use them and see" versus "white wall" performers, but I could see there being a point where artifacts are distracting. Were they minor ones (dark rings? halos?) or more major (uneven beams? cut off edges?)?

I recently got the FFL 5k installed in my reylight Lanapple. For me personally, I love it. I found the tint to be phenomenal. I'd love to have this led in an MDC 1-2v AA or CR123 version with 3 mode
View attachment 74050
View attachment 74051
Is the niche of the FFL emitters CRI, then? Did you notice it throwing significantly better than the 519A or SST-20?
 
..and so just chose not to post versus posting something negative.
100% this. I understand there can be production issues and it was likely mine was a one-off.

I think with both Kosen and Malkoff being small businesses, I can understand people not wanting to say or post anything that could be detrimental (I think most of us like the Kosen specials, and would like them to continue).
Also 100% this. What Kosen and Malkoff are doing with these collaborations are definitely appreciated by our small community.
Beam artifacts are interesting, because Malkoffs tend to be "use them and see" versus "white wall" performers, but I could see there being a point where artifacts are distracting. Were they minor ones (dark rings? halos?) or more major (uneven beams? cut off edges?)?
There was nothing distracting at all. Just making sure to point out that it isn’t a beam like you would get out of a domed emitter. Should’ve realized my audience on this point.
Is the niche of the FFL emitters CRI, then? Did you notice it throwing significantly better than the 519A or SST-20?
It definitely had significant throw compared to the 519A or SST. But I also feel like throw is very subjective. It was certainly more noticeable though.
 
100% this. I understand there can be production issues and it was likely mine was a one-off.


Also 100% this. What Kosen and Malkoff are doing with these collaborations are definitely appreciated by our small community.

There was nothing distracting at all. Just making sure to point out that it isn't a beam like you would get out of a domed emitter. Should've realized my audience on this point.

It definitely had significant throw compared to the 519A or SST. But I also feel like throw is very subjective. It was certainly more noticeable though.
Thanks for the info!

I initially passed due to the 5000K, and I think I might still pass. Though, I feel like maybe this could be an interesting alternative to my M61SHO with the ghastly white emitter, haha...

Then again, I guess the IRS made my budget decisions this month, haha.
 
Is the niche of the FFL emitters CRI, then? Did you notice it throwing significantly better than the 519A or SST-20?
Yeah high CRI and the tints are clean, domeless. No green at all. It does throw very well, more than the 519a. Throw vs the SST is negligible, I prefer the FFL and 519 over the SST20, however the SST20 would suit my needs perfectly if nothing else was available

There's really no wrong choice of any CCT of the FFL. They are all great, just comes down to preference
 
Last edited:
I have one.

I think it’s super nice, very clean, pure white tint.
I have no complaints with the beam, no artifacts or anything, at least in an MD2. Definitely has a little bit of throw, and I’ve had no reliability issues.

My one complaint is the output does, to me, feel a bit low, mostly compared to the M61SHO.

I’ll try and get some beamshots once it gets dark. I would definitely rather have this emitter over any SST20/519a.
 
I have one.

I think it's super nice, very clean, pure white tint.
I have no complaints with the beam, no artifacts or anything, at least in an MD2. Definitely has a little bit of throw, and I've had no reliability issues.

My one complaint is the output does, to me, feel a bit low, mostly compared to the M61SHO.

I'll try and get some beamshots once it gets dark. I would definitely rather have this emitter over any SST20/519a.
Curious how it compares to the m91bn on reduced output.
 
So, last year around June I purchased a crenellated bezel for a wildcat. But now the picture I see on the website looks like a different style bezel. Anyone know when it changed?

Has there ever been a stainless or titanium version of these? Cloud Defensive makes a light that has a tool steel bezel, which seems pretty rugged. I’ve never seen it in person, but if something like that was made for a hound dog/Wildcat, I’d buy several.

The bezel I have:
IMG_0642.png

The bezel on the website:
IMG_0641.png
 
MDC AA incoming from Kosen. Looks like it's going to be 519a 3500k. At least that's what it says in the description.
Interesting. I think the last round of MDC AA's that were 4500K were originally supposed to be 3500K. I got the 4500K, and it's very nice.

Those 3500K 519A's ended up going into some M61's, and I got one of those, and it's very nice!

So....fudge...I am going to pretend I didn't see this, cause the MDC AA mode spacing is...very nice...
 
3500k is very nice. One of my favorites, however I was hoping for a cooler temp

Kosen likes those warm temps that's for sure

Still, may have to get one. Mode spacing is superior on those

Wish I could just buy the head
 
Last edited:
3500k is very nice. One of my favorites, however I was hoping for a cooler temp

Kosen likes those warm temps that's for sure

Still, may have to get one. Mode spacing is superior on those

Wish I could just buy the head
I CAN swing 3000K and 3500K, but 4000K is my favorite. I think I still prefer my SST-20 because of the softer hotspot, and because it's got a beautiful 4000K beam.
 
I CAN swing 3000K and 3500K, but 4000K is my favorite. I think I still prefer my SST-20 because of the softer hotspot, and because it's got a beautiful 4000K beam.
I may go with the stock 4000k AA again or even try the 5700k. Price is better, and I’m at the point where I don’t really care too much about the niche of LEDs. Plus I’d hate to spend $185 on another light just when I only need the head. Already have the 3500k in li-ion and it’s great
 
Back
Top