The Red Dragon and his brothers...

[Icarus]

Fivemega’s tri-bored 1.5D Maglite with fluted head, UCL lens, 3xLuxV WX0S stars, 3x McR20 reflectors, modified PTS-C Cu heatsink, High Voltage nFlex driver in custom made holder, switch modified to momentary pushbutton, running on 6x R123 cells in one 6x123 serial battery holder (22.2V).

Runtime in regulation at 1000mA using 6x R123 (AW 750mA) was 21mins (600mA after 40mins).

Fivemega’s tri-bored 2D Maglite with finned head, UCL lens, 3xLuxV WY0S stars, 3x McR20 reflectors, PTS2-D heatsink, High Voltage nFlex driver in custom made holder, switch modified to momentary pushbutton, running on 6x 17500 cells in two 3x17500 serial battery holders (11.1V).

Runtime in regulation at 1000mA using 6x 17500 (AW 1100mA) was 1 hour 6 mins.

Fivemega’s tri-bored 2.5D Maglite with finned head and cross machined body, UCL lens, 3xLuxV XX1S stars, 3x McR20 reflectors, PTS2-D heatsink, HV nFlex driver in custom made holder, switch modified to momentary pushbutton, running on 6x 17670 cells in one 6x17670 serial battery holder (22.2V).

Runtime in regulation at 1000mA using 6x 17670 (AW 1600mA) was 1 hour 41 mins.

Happy New Year to everyone... ... :wave:

 

[Strauss]

Re: The Red Dragon and his brothers

I like the first one 🙂 I love my Red Dragon, it's my "go-to" light when I am at home utilizing it's multiple brightness levels. With at least 600 lumens on tap on high, almost 18hrs. of runtime on low, and a beam profile thats got to be about as perfect as a beam can possibly get, why would I grab anything else(did I mention gulit free lumens)??? When I know I am going to be needing light outside, then it comes with me out of the house.....but it is not my EDC...only because it's too big(not that it's a "big" light by any means, just not pocketable). I would love to have a "family reunion"!!


And off topic, Icarus, did you get my PM about your "Third eye" TriLux??

 

[Long John]

Re: The Red Dragon and his brothers

:wow: That's art from an artist ...:twothumbs

Excellent lights Freddy :goodjob:


Very best regards and a happy new year:grouphug:

__________
Thomas:wave:

 

[Icarus]

Re: The Red Dragon and his brothers

... And off topic, Icarus, did you get my PM about your "Third eye" TriLux??

Yes sir, I'll try to reply tomorrow... 🙂

 

[gregw]

Very nice work as usual, Freddy. :goodjob: Thanks again for putting together my Tri-X.

Here are some more pictures of the Tri-X...

 

[Icarus]

Hi Greg, thanks for posting the extra pictures of your Mr. Tri-X. :thumbsup:

 

[liteglow]

where can I buy one 😀

 

[Icarus]

where can I buy one 😀

Make a guess... :naughty:

 

[TranquillityBase]

Outstanding Freddy...you have no equal in the TL, QL, 7L and whatever other combinations you dream up, category...Your photos are wonderful too...🙂

I love the cross machined body...

TB

 

[Libbs]

I agree with tranquil, the cross machined body is _really_ nice! 😀

 

[LuxLuthor]

Very high quality work! Congratulations, you should be really proud of that.

 

[criollo]

I have the Red one which is a 2.5D... Very fond of it. :thumbsup:

Thanks Freddy for this one...I called mine "The Red Emperor". 😀

Running on 6x 17670 cells and 3 x WYOS. The output is simply awesome. :rock:

Love it !!!

Cassian 🙂