Ti 2xAA McClickie Pak wave

[benben_stone]

First post in this thread for 2012!!! :twothumbs

E-mail sent for one x Ti 2xAA McClickie Pak

Thanks Don. :candle:

 

[benben_stone]

Arrived safely downunder.

Extremely good match for the two sundrop XR-U heads.

Thanks Don!

 

[managermr]

Is the Ti 2xAA McClickie pak compatible with a Haiku XML head and/or a Mule Hi CRI Nichia 119 head?

 

[McGizmo]

Is the Ti 2xAA McClickie pak compatible with a Haiku XML head and/or a Mule Hi CRI Nichia 119 head?

The Ti 2xAA pak was designed specifically with this in mind, yes, compatible and intended for such.

 

[managermr]

Thanks for the response Don. I thought this was the case, but wanted to make sure.

I will be ordering a 2xAA pak soon.

 

[Rossymeister]

Quick Question.

Are these paks the same "swollen" design as the 2x123 paks?

 

[McGizmo]

Quick Question.

Are these paks the same "swollen" design as the 2x123 paks?

The OD of all of the ribs is the same if that is what you are asking and don't bulge in the middle of the pak like the 2x123.

 

[Ualnosaj]

Don, how come mode changing with this body/switch is just a simple light tap versus the 1xCR123 pak?

Wait a minute. Let me qualify that a bit more in a moment.

What I mean is in momentary on -- with the light off, I can just light tap it in momentary on and it switches modes whereas this was much more difficult with the 1xCR123 body?

To put in perspective, if I wanted to signal someone with a few quick flashes, the 2xAA would switch modes whereas the 1xCR123 would keep mode.


*** Never mind that. I'm crazy. The other lights do that too....

___________
Posted from my phone.

 

[innersmile111]

HI

ARE THE Haiku XP-G 2xAA STILL AVAILABLE FOR PURCHASE?

IF SO, PLEASE EMAIL

[email protected]

 

[McGizmo]

I am only building with the XM-L and Nichia 119 HiCRI LED's these days. Either LED can be used in a Haiku 2xAA.

 

[BenChiew]

Don. I noted that the 2AA Pak comes in 2 variants. One of which has got a lanyard hole directly the opposite side where the screws hold the clip.
Is this a recent offering / alteration of this pak?

 

[McGizmo]

Don. I noted that the 2AA Pak comes in 2 variants. One of which has got a lanyard hole directly the opposite side where the screws hold the clip.
Is this a recent offering / alteration of this pak?

I had the lanyard hole added in subsequent batches to the first run and the 1xAA pak also has the lanyard hole.

 

[BenChiew]

I had the lanyard hole added in subsequent batches to the first run and the 1xAA pak also has the lanyard hole.

Noted with thanks Don.

 

[tobrien]

strictly out of curiosity, and I do hope to pick one of these 2xAA paks up one day, how much skinnier are these AA bodies than the 123 paks?

I realize the diameter of CR123s is wider by design versus AAs though

 

[McGizmo]

strictly out of curiosity, and I do hope to pick one of these 2xAA paks up one day, how much skinnier are these AA bodies than the 123 paks?

I realize the diameter of CR123s is wider by design versus AAs though

The large diameter at the tail is .990" on the 1x123 and .850" on the 2xAA The larger diameters at the "waist" of the 1x123 is .815" and .750" on the 2xAA.

 

[tobrien]

The large diameter at the tail is .990" on the 1x123 and .850" on the 2xAA The larger diameters at the "waist" of the 1x123 is .815" and .750" on the 2xAA.

thank you sir! so for all intents and purposes they'll feel the same when being gripped, huh?

 

[eala]

thank you sir! so for all intents and purposes they'll feel the same when being gripped, huh?

I actually find the AA profile better as far as grip goes, but it likely depends on your hand size and preferences.

eala

 

[nbp]

+1 I really the AA pak also. The slight added length and the larger ribs make it more comfortable in my opinion.

 

[F89]

Hi Don,

Email sent for one of these.


Cheers

 

[tobrien]

I actually find the AA profile better as far as grip goes, but it likely depends on your hand size and preferences.

eala

+1 I really the AA pak also. The slight added length and the larger ribs make it more comfortable in my opinion.

sorry I missed yalls posts, thank you! I have a hunch the AA is more comfortable. Thanks guys!