Trying to mate SF E-series body to M-series head

[brighterisbetter]

Is there a one-piece adapter to enable this? I know there's the TnC E2C adapter for running E-series bodies with C-series heads. And there's the LeefDaptor for running C-series bodies with M-series heads. But what I'm looking to do is run an E-series body with an M-series head. Does such a beast exist? Can you run the LeefDaptor and E2C together?

Specifically, I'd like to connect an L4 body to a Z46 head.

 

[gswitter]

Is there a one-piece adapter to enable this? I know there's the TnC E2C adapter for running E-series bodies with C-series heads. And there's the LeefDaptor for running C-series bodies with M-series heads. But what I'm looking to do is run an E-series body with an M-series head. Does such a beast exist?

Don't think so.

Can you run the LeefDaptor and E2C together?

Yes.

 

[brighterisbetter]

Thank you sir for the reply. Man, that sounds like it would make for a long combo. Anyone have both the E2C and the LeefDaptor's who cares to take a pic of them joined together? The whole objective of what I'm attempting is to create as slim/short a body as possible with the Z46 in order to run 2xIMR123's. I suppose a Leef 1x18650 would work, or even a 6P body, but I'd like to go even thinner.

 

[gswitter]

I don't think the length will be too bad. It's the difference in diameter between the head and body that will look (and feel) odd.

I have all the pieces to put together the combo you describe. If I can get ahold of a camera, I'll try to get a pic up later today.

 

[brighterisbetter]

If I can get ahold of a camera, I'll try to get a pic up later today.

Oh sweet thanks.

 

[tx101]

Brighterisbetter ... You have the E2C adapter, all you need now is the C2M adapter :naughty::naughty::naughty:

Read your PM :twothumbs

 

[brighterisbetter]

How about this combo: KT4 mated to an L4 body, running two IMR123's, a fivemega bi-pin holder and a WA1111 :naughty:

 

[gswitter]

How about this combo: KT4 mated to an L4 body, running two IMR123's, a fivemega bi-pin holder and a WA1111 :naughty:

That's what I'm planning to do using one of the TnC turbo head adapters...

Here's your Z46 / Leefdapter / E2C / L4 / Z52 setup...

And just for the hell of it, Z46 / Leefdapter / C2 / Z41...

 

[brighterisbetter]

AWESOME THANK YOU!!!

 

[LukeA]

The Salvation Army people ring those outside of stores here. :thinking:

 

[Stillphoto]

So it appears I was a bit of a bonehead...I ordered a 3p body hoping to mate it to an m2 head...this isn't possible without the adaptor is it?

 

[tx101]

I think your going to be ok with a M2 head, its the M3 head that needs
an adapter

 

[TMedina]

3P body?

-Trevor

 

[TMedina]

Purgatory is...having a M30 drop-in and not being able to assemble a host.

-Trevor

 

[Youfoundnemo]

with the C2M adapter could you put a M6 head on a C sized body?

 

[brighterisbetter]

with the C2M adapter could you put a M6 head on a C sized body?

Correct

 

[Youfoundnemo]

so a 9P with the C2M would be a M3 or does it add a extra cell? I think I need one of these if no one awnsers my thread in GD

 

[brighterisbetter]

The C2M adapter does not add an extra cell length, so a 9P would still be a 9P, only it would accept either a KT4 or Z46 or other M-series head.

 

[Youfoundnemo]

Ok thanks brighterisbetter now I know that I need a KT4 and a C2M addapter....now to pay for it all.....

 

[flip]

I have seen it mentioned here that gandrtactical.com has a flashlight body that uses "E" tailcaps and "C" bezels. I don't know anything about the quality of the bodies but it might be easier and cheaper to use them and 1 adapter instead of a Surefire body and 2 adapters.