• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

V3 Triple XPG 1100 lumen Fully Regulated Drop-ins now available

The ZeroResistance upgrade is reversible. When you pull the Z41 innards with pliers, you might get some deeper scrathes on it but it is still working that way. Or you follow the Oveready Instructions and might damage the boot permamently (didn´t happen with mine) but have the innards untouched.

Eric
 
ninemm said:
Will the standard twisty tailcap on my C2-CJ work okay with the V3? Would switching to a Z41 w/McClicky yield noticeably better results?
Click to expand...

ninemm said:
Would a McClicky net more lumens from the V3, or perhaps the Zero Resistance tailcap mod would be the way to go? Does installing the Zero Rez insert destroy the innards of the stock cap permanently?
Click to expand...

In order of preference:

Zero Rez
McClicky
standard twisty

That being said, the V3 will run on all 3 and you will still be happy. If you like the twisty action your special edition C2 has and want to be able to 'restore' it, order the Zero Rez and a complete parts kit. Then if anything gets damaged during the installation, you've got a full set of spares.
 
ElectronGuru said:
In order of preference:

Zero Rez
McClicky
standard twisty

That being said, the V3 will run on all 3 and you will still be happy. If you like the twisty action your special edition C2 has and want to be able to 'restore' it, order the Zero Rez and a complete parts kit. Then if anything gets damaged during the installation, you've got a full set of spares.
Click to expand...

Sounds like a good plan. Thanks Eric and EG!
 
Also available:








34of0af.jpg



 
Yikes, ordered SST50 (Neutral) & Triple (Neutral)....., unfortunately I don't know if my 2x18650 body & 3 x18650 body will be back before these get here....will have to go in 6P sized bodies......

STOKED!! :party::party::party:

So many lights, so little time, only so large a belt to put holsters on....

Here's a question I should know the answer to, but it was more important for me to get another Bells Two Hearted Ale - instead of checking this.
AW 3 level soft start. I've got two or three of them - while they are for Incans they work with LEDs as long as you have 2 cells (won't work on one cell). I'm presuming the amp load is too much for the switch? I'd check before I did this - but figured I'd throw out the question.
 
Last edited:
nfetterly said:
Yikes, ordered SST50 (Neutral) & Triple (Neutral)....., unfortunately I don't know if my 2x18650 body & 3 x18650 body will be back before these get here....will have to go in 6P sized bodies......

STOKED!! :party::party::party:

So many lights, so little time, only so large a belt to put holsters on....

Here's a question I should know the answer to, but it was more important for me to get another Bells Two Hearted Ale - instead of checking this.
AW 3 level soft start. I've got two or three of them - while they are for Incans they work with LEDs as long as you have 2 cells (won't work on one cell). I'm presuming the amp load is too much for the switch? I'd check before I did this - but figured I'd throw out the question.
Click to expand...

Thanks for the orders everyone.

MMMMM, Two Hearted, might be my favorite beverage, can't blame ya...

Do not run the softstart with the V3 triple, they do not play well together.
As you know, they will not work with the M2-50 head either. (1 cell)
 
Oveready is staffed by evil flashlight geniuses missioned to create cutting edge lighting instruments to mystify and amaze us. :twothumbs

My new V3 tripple and host are on the way. Thanks for making more available so quickly.
 
Moddoo said:
Thanks for the orders everyone.

MMMMM, Two Hearted, might be my favorite beverage, can't blame ya...

Do not run the softstart with the V3 triple, they do not play well together.
As you know, they will not work with the M2-50 head either. (1 cell)
Click to expand...

Thanks for speedy response..., I had to do a reply to my order to see if I could get an orange cerakote A19 added to my order and 4 18500s. I couldn't seem to add the orange A19 without ordering a body - but already have the orange cerakote 6P from ElectronGuru.

Thought the softstart wasn't man enough for the triple. Works great with my incans and my first Malkoffs.

Sooner or later I'll have to rationalize all my bodies & dropins.
 
Please post pics of your orange 6P with extender and V3 Triple! That's gonna be one pretty lookin' setup.

That is: Once it arrives and is setup.
 
ninemm said:
Please post pics of your orange 6P with extender and V3 Triple! That's gonna be one pretty lookin' setup.

That is: Once it arrives and is setup.
Click to expand...

Will be interesting to see how long it is in the conceleco (spelling) holster. Have an bored HAIII 6P from Electronguru as well, maybe I should get two A19s & mix/match.....

I've got the original triple XPE 3 level (warm) and then version II XPE triple 3 level (cool). It is really amazing how big the "hot spot" is - it's almost as if there is no hotspot just really bright center area with bright out from there..., be interesting to see how this matches up.


Quick response from Dan, ordered orange cerakote A19 extender, batteries, zero resistance tail...
 
Last edited:
Aagh!!! all gone again!!!

These are truly beautiful dropins!!!

Please Please do a 2 or 3 mode triple or SST50 with broad voltage up to 9volts. The 3 level would be so useful for light/runtime magmt and be the perfect setup!!!:thumbsup:
 
I nabbed myself a neutral M2-50 just after work(almost shocked that neutral has the same luminous flux as cool white), with a nice Turnkey White C2 host for it.

I'm excited to finally get my hands on my first Moddoo item.

As expected, Moddoo has a talent for separating people's money from their wallet:devil:.
 
very nice looking product.. question on the color, I see a gray M2-50 head on the order page, do you have a choice of color? Also do you sell the entire M2/C2 host (head/body/tail) with in a uniform color?

..and are you going to make the M2-50 with levels?
ty
 
Just as well that the M2 SST-50s have sold out as I would have been very tempted but cannot afford one just now.

Hopefully UK customs will deliver my tripple to me later this week.

The M2 SST-50 looks to be very nicely done and I coud see one replacing my custom M2 running a Nailbender direct drive SST-50 at some point in time.
 
You must log in or register to reply here.

Similar threads

S
Weltool M7vn - Tactical Aspheric Triple Flood Mule
Replies
0
Views
2K
Skylumen
S
S
Weltool T5vn - 1st Sky Lumen 18500 Light
Replies
0
Views
2K
Skylumen
S
S
MAEEXRU XT3vn 18350 Titanium Triple Unique Mechanical Clicky With AUX LEDs
Replies
5
Views
2K
stewdogg
S
S
Weltool T2vn - Best Mechanical Tactical Clicky on Sky Lumen R
Replies
1
Views
2K
Skylumen
S
NitecoreStore
New Product - NITECORE TINI 2 500 LumenKeychain Light - Now in Titanium and Stainless Steel
Replies
9
Views
4K
sideman7
S

Latest posts

Back
Top