For Sale - Flashlight [VINTAGE] Many Lights (Surefire, Tru-Grit, B-Lite and others...)!!!

[konifans]

Ship from Hong Kong to USA by registered airmail or E-Express.
Postage included - Shipping to USA.
Shipping to USA only. No reshipping agents please.
Let me know first if you are from another country.
Please allow 3-5 days for shipment preparation.
Shipping to USA usually takes one to two weeks.
Method of payment: Paypal (2.5% discount when sending via "friends and family")

List of sales:

#B1 Bianchi B-Lite 2C US$75 Sold
#B2 PR Bulb AA Light X 3 US$30 Sold
#B5 Tru-Grit 7D Sold
#B4 Knight-Light Brass Executive Lite US$50
#S1 Surefire 9N with bi-pin adapter US$95 Sold
#S2 Surefire 9N with bi-pin adapter US$95 Sold



#B1 Bianchi B-Lite 2C US$75 SOLD

• Designed by Don Keller (Kel-Lite)
• In very good condition.
• Missing ano (one on the body, and one near the tail cap screw thread, and also inside the battery barrel near the screw thread which I am not sure if was done by the manufacturer)
• Very rare and it is hard to find one in such good condition.
• No signs of corrosion or battery leakage.
• Please see attached for more photos.

 

[konifans]

#B2 PR Bulb AA Light X 3 US$30 Sold

• These are 2AA battery lights but use a PR bulb.
• Similar in size to the Maglite AA.
• With a 2 cell bulb it is much brighter than the Maglite AA (0.7-0.8A or even higher PR bulb vs. 0.3A Maglite AA bulb).
• You will receive all 3 lights. Lumilite Metalist x 1 and Radioshack x 2.
• Many signs of use.
• No signs of corrosion or battery leakage.
• Please see attached for more photos.

 

[konifans]

#B5 Tru-Grit 7D US$130 SOLD

• You can make your own Tru-Grit 1D, 2D, 3D, 4D, 5D, 6D, or 7D, or longer if you have more battery tubes. More information HERE.
• Many signs of use.
• No signs of corrosion or battery leakage.
• See attached for more photos.

 

[konifans]

#B4 Knight-Light Brass Executive Lite US$50

• Made from barss, VERY HEAVY, almost a pound for such a small light (similar length to a Maglite AA).
• Uses 2 x C batteries and PR bulbs (commonly used in Maglite), I replaced the bulb with a 2 cell Halogen PR bulb.
• Some signs of use or tarnish.
• No signs of corrosion or battery leakage.
• See attached for more photos.

 

[konifans]

#S1 Surefire 9N with bi-pin adapter US$95 SOLD!

• Supplied with a stock N90 lamp assembly.
• Also Supplied with a Bi-Pin adapter and 10 x 3.7V 1.2A Xenon bulbs (A3712) from TAD Customs (adapter and 10 bulbs worth $60+)
• No batteries or chargers. I recommend the Lumens Factory battery adapter.
• In VERY good condition. Minimal signs of use.
• No signs of corrosion or battery leakage.
• Please see attached for more photos.

 

[konifans]

#S2 Surefire 9N with bi-pin adapter US$95 SOLD!

• Just like the last set, this is the second set.
• Supplied with a stock N90 lamp assembly.
• Also Supplied with a Bi-Pin adapter and 10 x 3.7V 1.2A Xenon bulbs (A3712) from TAD Customs (adapter and 10 bulbs worth $60+)
• No batteries or chargers. I recommend the Lumens Factory battery adapter.
• In VERY good condition. Minimal signs of use.
• No signs of corrosion or battery leakage.
• Please see attached for more photos.

 

[konifans]

Reserved.

 

[tx101]

interested in one of the SF 9N
will you ship to the UK ?

 

[konifans]

interested in one of the SF 9N
will you ship to the UK ?

Yes, I will ship to the UK. Which one do you prefer? #S1 or #S2? Since you asked first, you can choose. Another one will be reserved for another member.

 

[tx101]

Paypal send

Many Thanks

 

[konifans]

 

[bykfixer]

That brass light makes for a great host. All metal construction with a glass lens allows one to easily convert it to a 7D shorty by using 2 18500's and a 6 cell krypton.

 

[knucklegary]

Brass melee flashlight, looks to be right size and weight.
@konifans can you show pic of tail?
Does tailcap unscrew, or is body machined out of solid bar stock?
Thx..
Edit: spell check

 

[konifans]

Brass melee flashlight, looks to be right size and weight.
@konifans can you show pic of tail?
Does tailcap unscrew, or is body machined out of solid bar stock?
Thx..
Edit: spell check

The tailcap is only for on/off. It rotates and cannot be unscrewed and separated from the body.
To change the battery, unscrew the head.

 

[knucklegary]

Tail switch appears to be plastic?

 

[konifans]

Tail switch appears to be plastic?

No, I don't see any plastic inside...

 

[ABTOMAT]

If you'll allow me, the external rotating assembly of the switch is plastic with the brass cap glued over it. Haven't taken one apart any further.

 

[thermal guy]

Ya I have one. It's heavy. That's all I got😁

 

[konifans]

If you'll allow me, the external rotating assembly of the switch is plastic with the brass cap glued over it. Haven't taken one apart any further.

Thanks mate! That explains everything.

 

[knucklegary]

Ya I have one. It's heavy. That's all I got😁

Shinny too!