What did you use your flashlight for today?

sjmack

Newly Enlightened
Joined
Apr 8, 2010
Messages
161
I had to go check some rope seals on a Rolls Royce Trent 60, so I whipped out the 6P led. :D
 

corvettesR1

Enlightened
Joined
Aug 20, 2009
Messages
262
Well not today but yesterday at dusk I went for a walk to where a friend told me there were many racoons living in these brush piles at the woods edge near my home. He said shine a light and youll see all these eyes light up. Wow he was right.

I shined the light in some bushed and the first brush pile and two green eyes lit up at me like traffic lights.I was pretty shocked. You would otherwise never know they were there so close 20 feet away..I walked another 40 feet or so and two more eyes lit up a very large racoon sitting there looking at me no more than 40 feet away.

Im not sure if these racoons were getting pissed at my light so I figured id back off while the getting was good .
 

computernut

Enlightened
Joined
Apr 16, 2009
Messages
647
Location
Canada, eh?
I used my SF A2 to find a server, a small 1U that had a small label on it sandwiched between a bunch of networking gear. I could have turned the server room lights on but what's the fun in that? :grin2:
 

Locoboy5150

Flashlight Enthusiast
Joined
Nov 3, 2009
Messages
1,102
Earlier tonight I went out on an after dinner late night walk with my girlfriend. I took along my new Fenix TK20 since we would be walking around the high school running track behind her place and I needed a light with some throw due to the large area surrounding the track. The TK20 worked out great! I was thinking about taking my Fenix TK40, but it was just too big. The TK20 was a nice compromise.

At one time someone was riding a bike around the track and the LED bike light mounted to his handlebars was pathetically dim. It looked like it had about four or five Nichia LEDs in it. (Why people buy *any* lights with those lame things in them completely baffles me.) When he was riding towards us I was using my Fenix LD20 (my EDC light that I carry in a belt holster) to illuminate the track ahead of my girlfriend and I and it was completely blowing away the biker's light. :D

The big news was that my girlfriend wanted to play with my TK20 tonight so I let her hold it for a couple laps around the track. She really was having a great time shining it across the track and onto several far away trees. I said "See...flashlights are fun!" She smiled and though she didn't say anything in response to my comment, she didn't deny what I said. She's a fellow flashaholic...she just doesn't know it yet! :)
 

sjmack

Newly Enlightened
Joined
Apr 8, 2010
Messages
161
I used my 6P to convince the other engineers here at work that for our control room, we don't want another Mag Charger - we want Surefires for when we need torches.

While we were outside, I was asked why this company was better than Maglite - so without saying a word I took my 6P led out of my pocket, wound up, and launched it 100 feet in front of us onto the stone surrounding the control room. I walked over, picked it up, and shined it at the guy who asked.

We're getting Surefires.
 

fisk-king

Flashlight Enthusiast
Joined
Apr 24, 2009
Messages
1,104
Location
close to U.N.A.
I used my Ra Clicky to inspect the seals on one of the units turbine bearings (hydro turbine) as well as inspecting the units brake pads/ring inside the thrust housing (both places are well over 100deg. easily). Funny thing as we were inspecting the brakes a co-worker pulled out her streamlight polymer 4AA as I had mine cranked to full blast. We both (a fellow co-worker) looked at her light and then her which she then holstered her light:nana:. I love my clicky.
 

davidt1

Flashlight Enthusiast
Joined
Sep 23, 2008
Messages
1,907
Zebralight H501 (hand free) to cook, use the bathroom, and as reading lamp to save electricity in the house.
 
Last edited:

Sgt. LED

Flashaholic
Joined
Sep 4, 2007
Messages
7,486
Location
Chesapeake, Ohio
Mg PLI P Rocket SST 50 neutral is getting use today.
I am in the market for a new home and taking a good light to inspect stuff can make a big difference. Expensive problems hide in the dark!!
 

Flashlites R Us

Newly Enlightened
Joined
Oct 19, 2009
Messages
41
This evening I used my LF2XT to escort my girlfriend into my home and downstairs into my playroom which is equipped with a bar, home theater couches,mood lighting with the LF,etc. :devil:

When it was time for her to go home I again used my LF2XT to take her back outside to her car.
icon9.gif


She really liked the ultralow mode both times because she thought it was so sexy/secretive plus there was no chance of waking up my wife.......
sssh.gif
 
Last edited:

PolarBearX

Newly Enlightened
Joined
Feb 7, 2010
Messages
90
Location
PA USA
at The Rainforest Cafe today, got seated in the darkest corner and behind a big fat fake tree too...had to use my edc quark aa ww tac to read the menu,,, good thing too, they add some funky stuff to their otherwise decent food

PBX
 

David18

Newly Enlightened
Joined
Jun 30, 2006
Messages
39
I used my E1L to check on my son before we went to bed and again when he started crying in the night. He's only 2.

It's always wise to be able to see where you're going when you go into his room, never know when you'll step on some pointy toy or stub your toe on a fire engine......

They're never too young to introduce them to flashlights....
 

nbp

Flashaholic
Joined
Dec 16, 2007
Messages
10,976
Location
Wisconsin
LD01 SS and Ra Clicky used to help in dropping a Hemi and trans into a '70 Charger. :nana:
 

Ronstar

Newly Enlightened
Joined
Jun 11, 2010
Messages
7
I used my EDC River Rock 2 AA to check connections on the back of an image generator rack. This light is the often maligned zoom focus head with a TIR lens and is perfect for jobs like this where you don't want to be blinded by 200+ lumens from the shiny metal backsides of computers ;)
 

SuperTrouper

Enlightened
Joined
Nov 14, 2009
Messages
553
Location
UK
I used a Solarforce L2 with a 1 mode Dereelight XP-G R5 module in to hunt around in the loft (attic if you're American) for baby stuff from our first son to get down and get ready for our 2nd son being born sometime before the end of next month.

The heat transfer to the host seems pretty good, this is a one mode drop in drawing at 1.2A and the host seemed to heat up quite quickly in my hand while I was hunting through the storage boxes up there!
 

sjmack

Newly Enlightened
Joined
Apr 8, 2010
Messages
161
I used my 6P with an M60F to inspect the intake gasket on each our two RR Trents. It never ceases to amaze me how awesome these things are.
 

edc3

Enlightened
Joined
Jan 9, 2007
Messages
823
Location
Souptown
Well, one of our cats escaped around 10:30 at night and went instantly feral - wouldn't go near any of us. My daughter was crying, thinking he was never coming back. My son grabbed an Eagletac T10C2 I had lying around and I grabbed my Quark 123^2 Ti. The cat got COMPLETELY freaked out and disappeared under the house. After blocking him in, I took a 45 minute break for both of us to calm down and then waited patiently for him to come close enough to grab. Meanwhile I used my Quark to keep an eye on the numerous Black Widows I didn't know we had. I was pissed off and tired, but still enjoying the opportunity to play with flashlights.
 

Roger Sully

Flashlight Enthusiast
Joined
Sep 18, 2009
Messages
1,291
Location
New Jersey
I used my SF M3 with LF P7 LED head to light up the scene of an accident when a biker decided to wedge his bike under my neighbors car in front of my house. 2 cops showed up on the scene after I called 911.
One had a what appeared to be a 1/2 charged magcharger the second didn't have a light :thinking:. I loaned the one my T20C2 mkII for her to investigate the scene and I used my SF to keep the scene lit up while the EMTs worked on the rider and prepared him for transport.
 

TAC1

Newly Enlightened
Joined
Jun 18, 2010
Messages
9
I lit up my driveway and back yard for the thousand and somthingth consecutive night in a row for no other reason except that I could.
 

think2x

Flashlight Enthusiast
Joined
Jul 3, 2009
Messages
1,581
Location
Pulaski, Va.
I used my Quark AA on low to see while adding a 9th AMC to a shiningbeam driver and assembling my first Mag P7 mod.lovecpf I either need better desk lighting or a headlamp:whistle:
 
Top