brighterisbetter
Flashlight Enthusiast
Usual rules apply. First to post an 
and timely 
gets it. I'll eat the S&H & fees. Will ship UPS Ground insured w/tracking for Domestic. International I'll eat up to $7 but after that it's on the buyer.
1) Surefire U2A with stock/Leef bodies/tailcaps and extras, WITHDRAWN
Sent a brand new U2A to darkzero to perform a P7 emitter swap. He did an outstanding job. The emitter is perfectly centered and there's not the slightest exterior machining mark. Driver and all electronics remain unchanged and completely stock. Reason for selling is that I'm a bit of a perfectionist I'm sad to say, and the Vf on two of the dies on this emitter appear to differ slightly from the other two. In the interest of full disclosure, Will (darkzero) wasn't aware of the Vf disparity until post-assembly. I'm very happy with the overall result of the build but I'm just moving on. The Vf difference can be seen on the 3 lowest levels when holding the light within I'd say 12" of the target object (usually a piece of white paper for me). Levels 1 thru 3 are somewhat non-discernible output-wise, 3 thru 6 appear to be evenly spaced with 6 obviously being the screamer. There's the slightest of donuts in the middle of the hotspot. Tint is cool white just how I ordered it (DSXOJ) cause I liked the stock cool P4 bin so much. Throws not quite as good as in original configuration but the U2 reflector fits the P7 well in my opinion. You can run it in it's stock body setup with either 2xCR123's or 1x17670 (haven't tried testing for fit), or you can lego the head onto the included Leef ribbed body and bolt tailcap for a 1x18650 setup. Stock body is absolutely mint. Leef body is close to mint, I'd say 97%-98%. The very slightest of dings are on one spot of the body and two spots on the tailcap. Black sharpie conceals them well. I'm including a HA-NAT M2 head with LU60 adapter (first one I've seen with this particular styling) that mates well with either body. It's got the P60 LA in there right now and will work with either battery configuration. So you're getting two lights for one price. M2 head has the slightest of scratches on one spot but barely noticeable; I've tried to highlight that area with my cellphone pic. I'm throwing in two protected AW 18650's also. Any questions please ask via PM and if it's relevant to the thread, I'll post here for everyone to see the reply.
2) Moddoo ∆ XP-E P4 ~500 lumen high-only warm/frosted, $105 SOLD
Was going to use it in the U2 body / M2 head / LU60 setup above but the LU60 only accomodates drop-in's with springs on the back end rather than solid bodies (ie. incan LA's, nailbender stuff). So Malkoff's and Moddoo's won't fit. I didn't realize this until after I had ordered all the parts. Brand new as received from ElectronGuru.
and timely gets it. I'll eat the S&H & fees. Will ship UPS Ground insured w/tracking for Domestic. International I'll eat up to $7 but after that it's on the buyer.1) Surefire U2A with stock/Leef bodies/tailcaps and extras, WITHDRAWN
Sent a brand new U2A to darkzero to perform a P7 emitter swap. He did an outstanding job. The emitter is perfectly centered and there's not the slightest exterior machining mark. Driver and all electronics remain unchanged and completely stock. Reason for selling is that I'm a bit of a perfectionist I'm sad to say, and the Vf on two of the dies on this emitter appear to differ slightly from the other two. In the interest of full disclosure, Will (darkzero) wasn't aware of the Vf disparity until post-assembly. I'm very happy with the overall result of the build but I'm just moving on. The Vf difference can be seen on the 3 lowest levels when holding the light within I'd say 12" of the target object (usually a piece of white paper for me). Levels 1 thru 3 are somewhat non-discernible output-wise, 3 thru 6 appear to be evenly spaced with 6 obviously being the screamer. There's the slightest of donuts in the middle of the hotspot. Tint is cool white just how I ordered it (DSXOJ) cause I liked the stock cool P4 bin so much. Throws not quite as good as in original configuration but the U2 reflector fits the P7 well in my opinion. You can run it in it's stock body setup with either 2xCR123's or 1x17670 (haven't tried testing for fit), or you can lego the head onto the included Leef ribbed body and bolt tailcap for a 1x18650 setup. Stock body is absolutely mint. Leef body is close to mint, I'd say 97%-98%. The very slightest of dings are on one spot of the body and two spots on the tailcap. Black sharpie conceals them well. I'm including a HA-NAT M2 head with LU60 adapter (first one I've seen with this particular styling) that mates well with either body. It's got the P60 LA in there right now and will work with either battery configuration. So you're getting two lights for one price. M2 head has the slightest of scratches on one spot but barely noticeable; I've tried to highlight that area with my cellphone pic. I'm throwing in two protected AW 18650's also. Any questions please ask via PM and if it's relevant to the thread, I'll post here for everyone to see the reply.
2) Moddoo ∆ XP-E P4 ~500 lumen high-only warm/frosted, $105 SOLD
Was going to use it in the U2 body / M2 head / LU60 setup above but the LU60 only accomodates drop-in's with springs on the back end rather than solid bodies (ie. incan LA's, nailbender stuff). So Malkoff's and Moddoo's won't fit. I didn't realize this until after I had ordered all the parts. Brand new as received from ElectronGuru.
Last edited:
for one sweet U2A setup...great price, great seller :thumbsup:
