Would like to mod, where to start?

[fugleebeast]

Hi all,

I've been lurking around the forums for awhile; great place you have here! Very informative.

I'd like to start playing around with lights, especially leds, but I'm having a hard time finding beginner info. I've tried to use the search function but I've been striking out. Are there any good resources out there for beginners? Like, how do flashlights work? Emitters and circuits? All that good stuff? I know next to nothing about flashlights and the info on here is quite daunting.

I apologize if I'm just blind and have been missing it. I'd appreciate the help.

Thanks!


-Fugs

 

[Marduke]

A starting place:
http://www.candlepowerforums.com/vb/showthread.php?t=172991

 

[Gunner12]

A easy place to start modding is with the Elly Cree mod.

Get a Elly flashlight(has a regualtor, switch, reflector...), get a Cree XR-E LED(P4 because it is not that expensive, Q5 would be the brightest) and swap the LED(Unsolder the old one, place thermal paste/epoxy on the bottom of the new one and solder the new LED on)

:welcome:

 

[Toohotruk]

One great and easy mod (not an LED mod though), is to get a Mag 2C, a piece of heater hose, or PEX plastic water line, a 6 cell Mag-num star xenon bulb (or if you're daring, a 5 cell bulb...a bit brighter, but you risk instaflash) and 3 x CR123 lithium batteries.

Put it all together and you have one VERY bright incan flashlight in a medium sized package...guaranteed to impress!!! :naughty:

 

[jbosman1013]

Buy a surefire 6p, the mods are endless

 

[fugleebeast]

Thanks for the help guys, just what I needed.

You guys rock.

-Fugs

 

[Coop]

Look at the parts sections of www.kaidoman.com and www.dealextreme.com too. Loads of moddingparts at price levels where you can afford to screw something up...

Also they sell loads of cheap lights that will make nice hosts for your mods.

 

[LEDninja]

ROP (Roar of the Pelican)
http://lights.lightrefineries.org/?page_id=9
http://www.candlepowerforums.com/vb/showthread.php?t=120462
6AA to 2D converter
http://www.candlepowerforums.com/vb/showthread.php?t=176683
Boroflot lens
http://www.lighthound.com/index.asp?PageAction=VIEWPROD&ProdID=1079
bulbs
http://www.lighthound.com/index.asp?PageAction=VIEWPROD&ProdID=1070
reflectors
http://theledguy.chainreactionweb.com/index.php?cPath=48_56_73
I believe the stock reflector is for the low bulb (500 lumens) For the high bulb (1000 lumens) you need to request it be drilled out.


AuroraLite Hotwire Kit for MiniMag
http://flashlightreviews.com/reviews/auroralite_hotwire.htm
kit
http://www.lighthound.com/index.asp?PageAction=VIEWPROD&ProdID=2011
battery
http://www.lighthound.com/index.asp?PageAction=VIEWPROD&ProdID=1296
charger
http://www.lighthound.com/index.asp?PageAction=VIEWPROD&ProdID=2463