Sold/Expired WTS: McGizmo Ti-PD-27S (SOLD) , TB Aleph/e (SOLD)

ShineOnYouCrazyDiamond

Flashlight Enthusiast
Joined
Aug 18, 2009
Messages
4,442
Location
CT, USA
I am looking to sell two Ti gems.

The basics:
First posted "I'll take it." gets the item over any PMs in progress.
Prompt PayPal payment expected.
CONUS USPS Priority shipping included with purchase.
Int'l will cost $40 extra for USPS Global Express w/ tracking number.

1) This light is a McGizmo Ti-PD-27S that I have had for a while now. It is a beautiful little light and an amazing thrower for its size with a McR27S reflector. The condition of this light is excellent. It shows typical Ti light carry marks from gentle carry and use, but no deep scrapes or dings. What makes this light even better is the wonderful list of upgrades and custom work:
  • XP-G2 neutral R4-5B4 led upgrade performed by myself.
  • Hi level bump to 833mA performed by datiLED.
  • Custom Blue Splash Anodized McGizmo clip by ukmidnight.
  • 6mm Blue Steve Ku trit replacement (secured with Norland) to compliment the clip performed by myself.
Even with the Hi level bump this light still supports both primary CR123s and RCR123/16340 cells. Tailcap current on a primary is ~1.5A and I have done straight test runs showing 50-55 minutes straight runtime on high with no excessive overheating.

NOTE: I've had a few people ask me in PM about how this light compares with a Haiku and a Makai in terms of throw. This light will blow a Haiku out of the water in terms of throw. The Makai may have a bit more throw, but the head is quite large making the light not so pocket friendly. This light uses a 27mm reflector which is pretty deep. For the power level being only 833mA it will easily out throw any P60 drop-in out there. And, for its size I've not found a light that will throw as well without being pumped up to max Amps so that it heats up too much to be usable.

Price $700 $675 $650 SOLD

A good profile shot. The overall anodized color of the clip is best shown in the second picture - the first one is a little light.
McGimo_TiPD27S_01.JPG


Please excuse the dust on the o-ring. I'll clean that before sending.
McGimo_TiPD27S_02.JPG


The XP-G2 came out beautifully centered.
McGimo_TiPD27S_03.JPG


Nice clear blue trit in tail.
McGimo_TiPD27S_04.JPG


2) Next is a TranquilityBase Ti Aleph/e host which I just received after purchasing here: http://www.candlepowerforums.com/vb/showthread.php?353925-Dam-Mule-Withdrawn. As nice as the host is it just isn't for me right now. The light is not mint perfect as originally described as it shows some very minor, but typical, gentle carry marks. These could be easily polished away or left to enhance the general character of the light. Please see the linked thread for more details but the basics:
  • Aleph/e host with no light engine.
  • Accepts any standard aleph light engine.
  • The reflector is a McR18 OP.
  • The tailcap has a Steve Ku e-series tailcap with an all green 6-trit button. Really a nice touch to this host.
  • Sized for CR123/RCR123 cells.

Price is what I paid $650 $625 SOLD

TB_Alephe_01.JPG


TB_Alephe_02.JPG


Please excuse the fingerprints - I should have wiped the host down before taking the pictures.
TB_Alephe_03.JPG
 
Last edited:

euroken

Flashlight Enthusiast
Joined
Dec 26, 2008
Messages
1,570
Location
Washington
Re: WTS: McGizmo Ti-PD-27S, TB Aleph/e

What I'd give to own these beauties...

Good luck with the sale soycd!
 

toby_pra

Flashaholic
Joined
Oct 9, 2007
Messages
6,006
Location
Germany
Re: WTS: McGizmo Ti-PD-27S, TB Aleph/e

If you ever decide to part out, i would like to get the Tailcap with Steve Ku MOD ;)
 

Ghostwalker54

Newly Enlightened
Joined
Sep 17, 2012
Messages
172
Location
Florida
Re: WTS: McGizmo Ti-PD-27S, TB Aleph/e

Many thanks for your patience ShineOn! As for Paypal......:thumbsdow:thumbsdow:poof::banghead::toilet::xyxgun:
 
Top