Sold/Expired XPG modules plus SST-50 -90 & MCE/P7 P60 dropin Modules for Sf product (part 4)

[johnzm]

Re: XPG modules plus SST-50 -90 & MCE/P7 P60 dropin Modules for Sf product (part 4)

Looks like i cannot PM at the moment due to my low post count

anyways,

Deerelight DBS V2 single 18650 and wanting to try out these new SST pills.

do you make a dropin for the DBS?

and what would you recommend? im looking for something that will make the light more floody compared to what i have (some sort of cree, not MC-E)


what would you reccomend? and what price?

Thanks!

 

[sfca]

Re: XPG modules plus SST-50 -90 & MCE/P7 P60 dropin Modules for Sf product (part 4)

Since I see people keep posting on here, remember guys we've moved onto part 5

Please look up/scroll down before posting!

 

[naked2]

Re: XPG modules plus SST-50 -90 & MCE/P7 P60 dropin Modules for Sf product (part 4)

(some sort of cree, not MC-E)

FYI: MC-E is Cree, as well as XR-E, XP-E, XP-G, etc.

 

[tolkaze]

Re: XPG modules plus SST-50 -90 & MCE/P7 P60 dropin Modules for Sf product (part 4)

Arrrgh, I did it again!

 

[Bob96]

Re: XPG modules plus SST-50 -90 & MCE/P7 P60 dropin Modules for Sf product (part 4)

Sending Paypal for:
SST-90 - Green - Direct Drive - 3 Level
SST-90 - Cool White - Direct Drive - 3 Level.
Both to use either IMR 26500 or IMR 26650 cell.

Thanks,
Bob96

 

[naked2]

Re: XPG modules plus SST-50 -90 & MCE/P7 P60 dropin Modules for Sf product (part 4)

Bob, look at post #554 above! 😱

 

[lennox3rd]

Re: XPG modules plus SST-50 -90 & MCE/P7 P60 dropin Modules for Sf product (part 4)

Hi Nailbender. I'm new to this so please forgive any gaffs... I would like to buy one of your SST-50 P60's. If I understand correctly how you do this, you will reply and I should then post a payment to you on Paypal. Correct?

Thanks. Len

 

[QtrHorse]

Re: XPG modules plus SST-50 -90 & MCE/P7 P60 dropin Modules for Sf product (part 4)

He has a more recent thread started. I would post in that one, just to make sure there is not a large delay because he did not see this one.

 

[Nite]

Re: XPG modules plus SST-50 -90 & MCE/P7 P60 dropin Modules for Sf product (part 4)

I would like to purchase a Cree XPG I think. It has specs closest to what I am looking for..and the price is right for my customer.🙂

3.8v to 9v 235 lumens minimum runtime 2*CR123 1.5 hrs - 2 hours.

So maybe a
Cree XP-G R4 -$35 C1 tint Cool white only 3-8.4volts in 5 levels.

Can it have a wide flood? The customer liked the M60F I showed him but I prefer to buy this drop in from you, its less expensive from you and in stock.

also the M60F has vanished from their site..not even listed as out of stock.

Id like to use the drop in with a 2x18500 FM body with two AW 18500 lico cells.lovecpf

He wants the light to be waterproof so maybe Ill take one of your flashlight heads as well..I need a good seal.

PM Sent.

Paypal standing by..I already took a deposit from my customer, the car mechanic.

thanks!

 

[eksiray]

Re: XPG modules plus SST-50 -90 & MCE/P7 P60 dropin Modules for Sf product (part 4)

Nailbender, do you have any 365 nm (or so) P60 drop ins? Or anything close to that, 370-375 would do. TIA

 

[Hammer Train]

Re: XPG modules plus SST-50 -90 & MCE/P7 P60 dropin Modules for Sf product (part 4)

Which warm emitter will give the greatest output at 2.8a?

 

[naked2]

Re: XPG modules plus SST-50 -90 & MCE/P7 P60 dropin Modules for Sf product (part 4)

Look at post #554 on previous page.

 

[Wangstang]

Re: XPG modules plus SST-50 -90 & MCE/P7 P60 dropin Modules for Sf product (part 4)

Just sent you a PM Nailbender.

Thanks!

 

[De-Lux]

Re: XPG modules plus SST-50 -90 & MCE/P7 P60 dropin Modules for Sf product (part 4)

Nailbender, I have a couple questions.
First: Do you make a drop in for the E1E?
Second: I am looking for a 3 mode drop in for my P6 that will run on both primary and RCR 123's in a warm tint with an excellent time. What would you recommend?Also, would I need to upgrade the stock tail switch to utilize the 3 modes? Thanks for your time.

 

[brandocommando]

Re: XPG modules plus SST-50 -90 & MCE/P7 P60 dropin Modules for Sf product (part 4)

Nailbender, I have a couple questions.
First: Do you make a drop in for the E1E?
Second: I am looking for a 3 mode drop in for my P6 that will run on both primary and RCR 123's in a warm tint with an excellent time. What would you recommend?Also, would I need to upgrade the stock tail switch to utilize the 3 modes? Thanks for your time.

Please be advised, this is part 4, (old thread.) We are currently on part 9.

Part 9 can be found here!

De-Lux, re-post your question over there and Dave will be much more likely to see it!

 

[De-Lux]

Re: XPG modules plus SST-50 -90 & MCE/P7 P60 dropin Modules for Sf product (part 4)

Thanks Brando for the input.

 

[707electrician]

Re: XPG modules plus SST-50 -90 & MCE/P7 P60 dropin Modules for Sf product (part 4)

New here, looking to upgrade my surefire 6PL. I would like to get a cree xp-g r5 1c drop in with smooth reflector for it if that's possible.

 

[Camochris2]

Re: XPG modules plus SST-50 -90 & MCE/P7 P60 dropin Modules for Sf product (part 4)

I have a surefire g2 and I am looking to upgrade it to a red led and I using it for nite time hunting so if some one could help me with what drop in to get and what kinda of distance I'm going to get out of it that would be great thanks

 

[Zoomov]

Re: XPG modules plus SST-50 -90 & MCE/P7 P60 dropin Modules for Sf product (part 4)

[h=1]Hi,
I'm going to purchase such flashlight body: Solarforce L2 Black CR123A/18650 Flashlight Body Version 2011[/h]to use with 18650 rechargable.
You have a lot of different drop-ins... What your drop-in can you suggest/advice to me?
Thank you.

 

[nailbender]

Re: XPG modules plus SST-50 -90 & MCE/P7 P60 dropin Modules for Sf product (part 4)

Hi,
I'm going to purchase such flashlight body: Solarforce L2 Black CR123A/18650 Flashlight Body Version 2011

to use with 18650 rechargable.
You have a lot of different drop-ins... What your drop-in can you suggest/advice to me?
Thank you.

Hi

this is a very old thread and has been closed for quite awhile.

Look here at these two threads http://www.candlepowerforums.com/vb...white-XRE-XPE-XPG-XML-U3-NICHIA-92CRI-PART-11


http://www.candlepowerforums.com/vb/showthread.php?342254-XP-G2-P60-STYLE-MODULES-COOLWHITES-amp-NEUTRALS

You can also see many I offer here, http://customlites.com/P60-D26-style-modules_c19.htm

If you look at these they are the newest and best modules offered at this time. You first need to determine the batteries to be used, with the L2 a 18650 will be the most efficient and give the best runtime. The XML's will be the brightest depending on tint up to about 750 - 800 lumens. These will also have the shortest runtime.

The XPG2s will be about 400 lumens for coolwhite and will get twice the runtime as the XML's. Smooth reflectors will give the best throw and the most dedicated hotspot while the textured or OP will give the most blended beam profile with a less dedicated hotspot.

Look at the above links and if you have questions please reply in the appropriate thread since I don't often monitor this one. You can also ask questions through the contact us on the site.

thanks

Dave