Sold/Expired XPG modules plus SST-50 -90 & MCE/P7 P60 dropin Modules for Sf product (part 4)

[French_Candle]

Re: XPG modules plus SST-50 -90 & MCE/P7 P60 dropin Modules for Sf product (part 4)

Hello Dave
Are the drop modules compatible with the Dereelight CL1H ?

 

[nailbender]

Re: XPG modules plus SST-50 -90 & MCE/P7 P60 dropin Modules for Sf product (part 4)

Hello Dave
Are the drop modules compatible with the Dereelight CL1H ?

Hi

I know the version 4 is. I just sent a couple off to owners of that light. You don't need a whole spring for it just a piece of one.

Dave

 

[elho]

Re: XPG modules plus SST-50 -90 & MCE/P7 P60 dropin Modules for Sf product (part 4)

Anyone have outdoor beamshots of the SST-90 vs. the SST-50?

I do. They are also linked in the member beamshots section in post #4 in this thread. 😉

And finally, are there any options for the 3-mode boards in terms of what level they start at

No idea whether it is still the same drivers these days, but the 2.5A regulated 3 mode driver on my SST-50 is Lo-Med-Hi, while the direct drive 3 mode driver on my SST-90 is Hi-Med-Lo.

 

[French_Candle]

Re: XPG modules plus SST-50 -90 & MCE/P7 P60 dropin Modules for Sf product (part 4)

hello
have you tried to build a triple xpg drop-in ?
Could it be regulated white a single 18650?
thank you
🙂

 

[nailbender]

Re: XPG modules plus SST-50 -90 & MCE/P7 P60 dropin Modules for Sf product (part 4)

hello
have you tried to build a triple xpg drop-in ?
Could it be regulated white a single 18650?
thank you
🙂

HI

I have not as it takes a little more than just the leds and such. There is a member on the forum that does a good job on triples. As for your battery question the answer is yes.

Thanks

Dave

 

[AMkrew]

Re: XPG modules plus SST-50 -90 & MCE/P7 P60 dropin Modules for Sf product (part 4)

Thank you for all your help.

Paypal sent for an sst-50 drop-in.

Where would I be without your help?




:candle:

 

[nailbender]

Re: XPG modules plus SST-50 -90 & MCE/P7 P60 dropin Modules for Sf product (part 4)

Thank you for all your help.

Paypal sent for an sst-50 drop-in.

Where would I be without your help?




:candle:

As I told you I am always glad to help. I appreciate the business

Dave

 

[FlaCracker]

Re: XPG modules plus SST-50 -90 & MCE/P7 P60 dropin Modules for Sf product (part 4)

I'm interested in the SST-50 direct drive single mode. Will it run at 6v? If so, how would it compare (output & runtime) running it with two primaries vs a single AW 18650-2600?

Thanks,
Jimmy

 

[nailbender]

Re: XPG modules plus SST-50 -90 & MCE/P7 P60 dropin Modules for Sf product (part 4)

I'm interested in the SST-50 direct drive single mode. Will it run at 6v? If so, how would it compare (output & runtime) running it with two primaries vs a single AW 18650-2600?

Thanks,
Jimmy

HI Jimmy

There is a little difference in brightness running 2XCR123 since you are forcing 6 volts but not a whole lot of difference when you consider the difference in run times.

You will get close to twice the run time for the 2600mah 18650. There might be 50 lumens difference but not much.

Dave

 

[kyhunter1]

Re: XPG modules plus SST-50 -90 & MCE/P7 P60 dropin Modules for Sf product (part 4)

Dave,

Can you make me a p60 xpg module, OP reflector, 3 level Hi/Lo/Strobe modes, also a perfect beam and hotspot with no donut hole? Do you have the R5 or S2 bin xpg yet?????? I plan on using this with a single AW17670 and want the best regulated driver for this battery. The capability to safely use 2 primaries would be nice to.

 

[Hugo2x]

Re: XPG modules plus SST-50 -90 & MCE/P7 P60 dropin Modules for Sf product (part 4)

Dave,

Can you make me a p60 xpg module, OP reflector, 3 level Hi/Lo/Strobe modes, also a perfect beam and hotspot with no donut hole? Do you have the R5 or S2 bin xpg yet?????? I plan on using this with a single AW17670 and want the best regulated driver for this battery. The capability to safely use 2 primaries would be nice to.

Yeah, A lot of us light nuts would pay top dollar for some hard driven S2's:twothumbs

 

[FlaCracker]

Re: XPG modules plus SST-50 -90 & MCE/P7 P60 dropin Modules for Sf product (part 4)

for the following.

P60 drop-in, Luminus SST-50, direct drive, 1 level, MOP reflector, cool white.

P60 drop-in, Cree XP-G R4, 3-8.4 volts, 5 level, small aperture OP reflector, cool white.

 

[FlaCracker]

Re: XPG modules plus SST-50 -90 & MCE/P7 P60 dropin Modules for Sf product (part 4)

Hey Dave,

I tried to PM but your full so I'll post it here. I referenced the wrong username in my paypal subject. Order:jlo86cj is my payment.

Thanks,
Jimmy

 

[bugsy714]

Re: XPG modules plus SST-50 -90 & MCE/P7 P60 dropin Modules for Sf product (part 4)

Hi Dave, same as above, time to clean it out mang!

Do you have the warm sst90 in stock?

 

[nailbender]

Re: XPG modules plus SST-50 -90 & MCE/P7 P60 dropin Modules for Sf product (part 4)

Dave,

Can you make me a p60 xpg module, OP reflector, 3 level Hi/Lo/Strobe modes, also a perfect beam and hotspot with no donut hole? Do you have the R5 or S2 bin xpg yet?????? I plan on using this with a single AW17670 and want the best regulated driver for this battery. The capability to safely use 2 primaries would be nice to.

Hi

I can make you one if I had the right driver, I don't have a high/ low / strobe right now. It has been on order for awhile but still has not shipped so who knows when.

I do not plan on carrying the R5 as I have stated here a few times. With there only being about 12 to 15 lumen difference between the R4 and R5 I doubt I will get any. I opted for what I could buy at the time.

As for S2 well lets just say I have a few feelers out there but with most R5 being back ordered until January who knows.

As for the no doughnut hole that is not a problem as the XPG reflector I use leaves a nice almost ring free and is doughnut hole free beam that is a nice mixture of throw and flood.

Dave

for the following.

P60 drop-in, Luminus SST-50, direct drive, 1 level, MOP reflector, cool white.

P60 drop-in, Cree XP-G R4, 3-8.4 volts, 5 level, small aperture OP reflector, cool white.

Thanks

Dave

Hi Dave, same as above, time to clean it out mang!

Do you have the warm sst90 in stock?

I have not at anytime seen warm 90's available with out special order. I have some 5700k sst 90 GN 200's and cool white GN 100's s

Thanks

Dave

 

[kyhunter1]

Re: XPG modules plus SST-50 -90 & MCE/P7 P60 dropin Modules for Sf product (part 4)

The R4 will do. Make me one with three levels, H-M-L modes, and this would be fine as long as High always comes on first.

Hi

I can make you one if I had the right driver, I don't have a high/ low / strobe right now. It has been on order for awhile but still has not shipped so who knows when.

I do not plan on carrying the R5 as I have stated here a few times. With there only being about 12 to 15 lumen difference between the R4 and R5 I doubt I will get any. I opted for what I could buy at the time.

As for S2 well lets just say I have a few feelers out there but with most R5 being back ordered until January who knows.

As for the no doughnut hole that is not a problem as the XPG reflector I use leaves a nice almost ring free and is doughnut hole free beam that is a nice mixture of throw and flood.

Dave

 

[nailbender]

Re: XPG modules plus SST-50 -90 & MCE/P7 P60 dropin Modules for Sf product (part 4)

The R4 will do. Make me one with three levels, H-M-L modes, and this would be fine as long as High always comes on first.

The sequence is actually low / med / high but it has memory so actually the last level used is the level it will come on at.

Dave

Hi

I can make you one if I had the right driver, I don't have a high/ low / strobe right now. It has been on order for awhile but still has not shipped so who knows when.

I do not plan on carrying the R5 as I have stated here a few times. With there only being about 12 to 15 lumen difference between the R4 and R5 I doubt I will get any. I opted for what I could buy at the time.

As for S2 well lets just say I have a few feelers out there but with most R5 being back ordered until January who knows.

As for the no doughnut hole that is not a problem as the XPG reflector I use leaves a nice almost ring free and is doughnut hole free beam that is a nice mixture of throw and flood.

Dave

 

[kyhunter1]

Re: XPG modules plus SST-50 -90 & MCE/P7 P60 dropin Modules for Sf product (part 4)

Go ahead and put it together for me, let me know when to send paypal.

 

[kyhunter1]

Re: XPG modules plus SST-50 -90 & MCE/P7 P60 dropin Modules for Sf product (part 4)

Go ahead and put it together for me, let me know when to send paypal.

 

[OfficerCamp]

Re: XPG modules plus SST-50 -90 & MCE/P7 P60 dropin Modules for Sf product (part 4)

Dave, quick Question:
Why do the P4 specifications state "6v (14v?)" which is it?