Zebralight H51

Candle Power Flashlight Forum

Help Support CPF:

Re: Zebralight H51 details/preorder!!!

Whats the H31 pocket clip? isn't it that the black rubbery thing that came with the H501?

Pics?
 
Last edited:
Re: Zebralight H51 details/preorder!!!

Wait a minute, why are they shipping H51 with H31 clips? :thinking:
Wouldn't it be too big?


I just checked this for you and the H31 body is slightly wider, the tailcaps are the same diameter so i guess that's where they get the 23mm.

With the H51 in the H31 clip there is a bit of wiggle room but that does not mean you could not use it because it takes a bit of effort to get the rubber back over the tailcap so it's not going to just come off on you.

Reading back, I guess a half solution is better than none. I just hope it's not a temporary solution where later on, they would come out with a proper H51 clip right after I got the H51 with H31 clip. :laughing:
 
Re: Zebralight H51 details/preorder!!!

dang- the new clips are keeping me from getting mine this week
before a backpacking trip. it was gonna be a gift for the GF.

maybe I should order an H31 and then trade her when the H51 comes?

hmmm...:thinking:
 
Re: Zebralight H51 details/preorder!!!

okay!
well, now Ill have an H31 too!

I just ordered one from Illuminationgear.com

great service!
 
Re: Zebralight H51 details/preorder!!!

Wait a minute, why are they shipping H51 with H31 clips? :thinking:
Wouldn't it be too big?




Reading back, I guess a half solution is better than none. I just hope it's not a temporary solution where later on, they would come out with a proper H51 clip right after I got the H51 with H31 clip. :laughing:

There is a bit of wiggle room using the H31 clip on the H51, if I was going to use the clip I would wrap the part of the body where the rubber sits on the body with electrical tape or some kind kind of wedge.

Kudos to ZL though for listening and I wonder exactly who they listened to. 😉
 
Re: Zebralight H51 details/preorder!!!

What exactly is the H31 clip, and what makes it special?
 
Re: Zebralight H51 details/preorder!!!

What exactly is the H31 clip, and what makes it special?

It's nothing special just the same designed clip ZL has always used, I guess their just going to toss them in the H51 box instead of waiting for a new batch that would fit a little better.
 
Re: Zebralight H51 details/preorder!!!

Thank you including the clip ZL. It is not something that I really need but I know that some others will use it a lot. I really appreciate that you listened to your customers. I think that will really help you to build brand equity.🙂
 
Re: Zebralight H51 details/preorder!!!

So I get to wait an extra week for a clip that doesn't really fit, that I will never use, because this is a HEADLAMP?

My thanks to all the whiners. :thumbsdow
 
Re: Zebralight H51 details/preorder!!!

If you never used a clip you should really try it. IMHO thats what makes Zerbalights so special: The ability to use the light as handheld, clipped or headlamp makes it a lot more versatile than single-purpose headlamps or flashlights.

I dont like the Clip Zebralight is delivering but i often use clips with my zebralights (mods). I would really apreciate if theyd sell their lights with clips lalong the lines of those Fenix is selling: Simple, clip-on metal clips without any silicone.

But the ZL clip is better than none, especially for a light wich is 5 bucks more than they used to be.
 
Re: Zebralight H51 details/preorder!!!

If you never used a clip you should really try it. IMHO thats what makes Zerbalights so special: The ability to use the light as handheld, clipped or headlamp makes it a lot more versatile than single-purpose headlamps or flashlights.

I dont like the Clip Zebralight is delivering but i often use clips with my zebralights (mods). I would really apreciate if theyd sell their lights with clips lalong the lines of those Fenix is selling: Simple, clip-on metal clips without any silicone.

But the ZL clip is better than none, especially for a light wich is 5 bucks more than they used to be.

I totally agree. I would even like the type of clip attachment that comes with the SC50. :twothumbs
 
Re: Zebralight H51 details/preorder!!!

That type of attachment would be handy for clip users but it will get in the way if you use it as a headlamp.

They could angle the attachment about 90° to the reflector. That way the clip could always stay on the light as it wouldnt get in the way while using it as a headlamp.

Or they could put the clip on the same side as the reflector. The clip wouldn`t interfere with headlamp use and you could put the light into a shirts-pocket letting it shine out of the pocket. Drawback is, that the light could not be ptu all the way into the pocket though. Perhaps add Bezel up and down possibility to suit everybody.
That would be my favourite clip position.

On the other hand, Zebralights would have to change their headband holders to clip-on variants as the current holders would interfere with the permanently mounted clip.


I did a rough sketch to show my ideas:
p1030579.jpg


The red and blue drawing shows the two possible Clip positions which id both like to have in one light (two sets of mounting holes).
The green drawing shows a clip on holder for the Headband.
That way you could clip your light to the headband without the need to remove the pocketclip. You could also unclip the light from the headband while wearing the headband for quick look at a detail without the need to take the headband from your head.
 
Last edited:
Re: Zebralight H51 details/preorder!!!

It's nothing special just the same designed clip ZL has always used, I guess their just going to toss them in the H51 box instead of waiting for a new batch that would fit a little better.
Thanks for the explanation. Reading this thread I started to think that ZL fielded some new design...
 
Re: Zebralight H51 details/preorder!!!

Seeing we're on a tangent about the clips, I thought I'd throw my 2 cents in. I've got the h50 and the sc30 and have to say this company is the most original and creative company going, light wise. I'm totally dumbfounded with the slip on clips they send with their lights. Please....at least have a clip on!

Oh....by the way, if you do, please let me know so I can order one.

Can't wait to get my H51! :popcorn:
 
Re: Zebralight H51 details/preorder!!!

I recently had an issue with a cheapy energizer headlamp, and have been looking for a quality replacement.

I think I found it.
 
Re: Zebralight H51 details/preorder!!!

I received my H51 and it's a beautifully made light. Tons of output, bright hot spot and plenty of spill.

Time to put all my non Zebra lights in the back of my sock draw!
 
Re: Zebralight H51 details/preorder!!!

That type of attachment would be handy for clip users but it will get in the way if you use it as a headlamp.

That way you could clip your light to the headband without the need to remove the pocketclip. You could also unclip the light from the headband while wearing the headband for quick look at a detail without the need to take the headband from your head.

Wow! Great illustration. I too wish they had a better clip solution...
 
Re: Zebralight H51 details/preorder!!!

I wonder why they would choose to remove the clip from the package. It is what makes the headlamp so much more versatile.

Just got mine yestarday (vey very happy with it) but I see that they are now delaying shipping to include a removable clip (H31)...
... why didn't I wait???

That wold have resolved my only gripe about it (well, I would also have liked a lanyard ring too really).

I keep my H50 in its clip and clip it into one of the tighter elastic loops of its headband rather than use the silicone holders. That way I can remove it easily, and it's pretty securely held in place. (The H50 silicone holders were a little loose for my liking).

They don't seem to have an accessories page on the Zebralight site that I can buy a H31 clip...

Anyone have any innovative workarounds?
 
Re: Zebralight H51 details/preorder!!!

Just got mine yestarday (vey very happy with it) but I see that they are now delaying shipping to include a removable clip (H31)...
... why didn't I wait???

That wold have resolved my only gripe about it (well, I would also have liked a lanyard ring too really).

I keep my H50 in its clip and clip it into one of the tighter elastic loops of its headband rather than use the silicone holders. That way I can remove it easily, and it's pretty securely held in place. (The H50 silicone holders were a little loose for my liking).

They don't seem to have an accessories page on the Zebralight site that I can buy a H31 clip...

Anyone have any innovative workarounds?

Its not very innovative but you can request an H31 clip from ZL. :grin2:
 
Re: Zebralight H51 details/preorder!!!

Just got mine yestarday (vey very happy with it) but I see that they are now delaying shipping to include a removable clip (H31)...
... why didn't I wait???

That wold have resolved my only gripe about it (well, I would also have liked a lanyard ring too really).

I keep my H50 in its clip and clip it into one of the tighter elastic loops of its headband rather than use the silicone holders. That way I can remove it easily, and it's pretty securely held in place. (The H50 silicone holders were a little loose for my liking).

They don't seem to have an accessories page on the Zebralight site that I can buy a H31 clip...

Anyone have any innovative workarounds?

I have posted 5 or 6 mods including the clip in the H501 thread.
 
Back
Top