Activity Stream

Is there a area where flashlight stores are discussed.

Edit: Looks like Fenix has the ALF-18 Battery Holder that appears to do what I'm looking for. Apologies for my confusion. ----------- Hi, all,...

Prefer one in excellent condition. Please email me with at offers: rayjruiz AT hotmail.com

This has been used and carried, I am not the original owner. Shows wear on bezel and body. No original packaging included. I believe the is the 110/5...

Has anyone else experienced any issues with the new C9000 Pro? I received mine today and right off the bat, I'm experiencing an issue. Slots 1 &...

Just like the title says, looking to buy a DC0 or DC 1 in aluminum.

hi i search a driver for xhp70 6v (buck driver) for 4s diameter must be 38mm thanks

Please add $5 for shipping via USPS first class. Used: 1) Steel Will Cutjack, OD D2. Purchased used on the forum but no signs of use visible. ...

As the title says, it's an excellent condition large, 9" reflector Costco HID from around 2007. It has a nice Fast-start slim ballast in it putting...

As title states, looking for any of the KT1-3 turboheads in HAIII Natural. Please pm me or reply here if you have one of these to part with. Also...

I was fearing ANDURIL II would be ghastly but this version was really good. Mode memory and thermal calibration is now a bit harder but an epic...

If you have any of these, please dm me

Looking for a bezel to run with my FM 18500 body. Can’t justify shelling out for a fancy HA FM C head but maybe I can for your well used Z44?

More lights for sale that don’t see pocket time or I have multiples of. All prices include USPS first class shipping within the U.S and payment...

Hello all, I am a home inspector and have been using Zebralight flashlights for years. I wanted a really powerful light for attics and...

Have a old 3d cell maglite (switch is gone), want to run a external switch and battery. So can I just run a positive wire from the brass button on...

Looking for a black bezel, let me know how much as well.

I needed a new EDC light for my working bag (nowadays I rarely need a lot of light, I have at least a bigger light in my car, and an I1 as keychain...

I received the T4K from Nitecore for the review. The T4K is a small EDC-Keychain light with a quick release system, that uses 4 CREE XP-L2 V6...

Currently looking for a lenslight mini titanium, not after a specific version but my top choice would be with the crenulated bezel and tail. I will...

Hello everyone... today we will see the Lumintop GT Nano: a very small thrower flashlight with 10180 battery. Here the link of the company and...

Not sure if this is the best forum section to post this. If an admin thinks it should be elsewhere - please move the topic. I wonder what socket...

Looking for a Surefire Fury tactical tailcap, no click just press/momentary and twist for constant. Also looking for two of the KaiDomain mag...

Greetings to the Lumen Leigon! (Is that what we are? Is there a term for us, collectively? Are we <gasp> the Illuminati? :)) As I've recently...

WTB Olights: S20 Baton (not S20-L2 or S20R) i1 EOS (not i1R or i1R 2) Al and SS i3E EOS Purple or Red M20 Warrior Cree XP-G R5 LED 320 lm...

Looking for a Maglite 6C; BNIB preferred.

Hello! After lurking around the forums for a few weeks I've finally taken the plunge and signed up. I work in photography and film, doing lighting...

I wasn't very impressed with the performance of the klarus 16340 rechargeable battery that came with the flashlight... just doesn't hold a charge...

We bought some led light strips (can change colors) for my son’s room and had to put 4 strips up plus a strip under his bed. the lights were from...

just wondering

This week's challenge was proposed by Bykfixer, and endorsed by Katherine Alicia, Jean-Luc Descarte, and id30209. All credit ( blame? :D ) goes to...

Looking for the older design (RT) in aluminum, black coated, or Ti. PM me if any of you are looking to sell, please. Thank you

Channeling the 1968 Masters Robert De Vicenzo here: I just got in the mail my GT NANO and immediately turned it on and was working fine, removed...

Lightly used would be nice.. Or if someone bought a couple spares for backups, NIB :takeit:

I hate to do it... I hate to turn this peace-loving forum into a conflagration where dualing opinions and points of view spill over into rancor but...

hi thanks. I am choosing the SST-20 DR Deep Red LED for either use in a Malkoff MD2 18650 with High/Low Ring if a M61 is made for it in the Group...

The Armytek 2A Prime is a bike and EDC light. The 2D and 3C Maglites with only 170 lumens and good run times are great throwers. Other throwers...

Here is the unboxing of Olight Marauder 2 !!! In the coming days a video with the field test will follow, and obviously a detailed review with...

The following is the opinion of the author based on actual use . This D2 CH3509 has what I consider to be rubbish for a blade . With a rather...

Will there be a SHOT show this year? Edit: it's cancelled. Oops I did not see the previous threads. I thought perhaps they'd postpone it until...

Just purchased an MH25GT (as well as a charger, diffuser, and p20i) from the Nitecore Store (online) and am anxiously awaiting delivery. There was a...

Sorry, not been in in a while, divorce and general life gets in the way lol.. Anyway, gets the Acebeam K60 out to use last week and it's dead as a...

Hello! Looking for two authentic Convoy C8 extension tubes to run 2x 18650 lights. I will pay however you prefer, just let me know!

What's going on guys? I just signed up to follow up on some leads on a C8 extension tube. I have been building LED flashlights for quite a few years...

Hello, New to the forum, so many apologies in advance if there is a similar thread or if this question has been covered in the past. I was...

For the old members here, yes, much to your regret, I did NOT die or forget how to log-in; anyways, enough of the crap!

I enjoy the threads about what flashlights everyone is buying, or the "recommend a light for..." sub-forum. I like to start there, because I figure...

I have this head torch but it is no longer working. The battery is fine. I opened it up to look at the circuit board and I can see that one of the...

Up for sale. Brand new from skylumen( Vihn) Bought as a backup. Titanium ToolVN PHC( polished heated colors) Driver VN2 Copper heatsink...

Up for sale Surefire Titan Plus SOLD New in package. Never opened 3 mode light. Uses surefires Maxvision beam for a smooth beam output....

I have been using my Laptop but anybody use Power Banks and if so, can you make recommendations? Thanks. Dave

I cut rope , as long as the knife cuts paper against the grain . 420 stainless steel . 180 grit diamond cut edge . Consider the Herbertz as...

i see my flashlight is good for 1 meter drops. but on what surface?

SOLD Chris Reeve Large Inkosi, Natural Canvas Micarta Inlays, S35VN, 6AL4V titanium. Model# LIN-1030. Near new condition, excellent centering and...

First time poster.... I appreciate the opportunity to learn from other forum members. I'm somewhat of an old timer, and am searching for a person...

I purchased a new in box Surefire EB1 Backup 300 lumen recently from a Surefire dealer. This is the black anodized version that I believe was...

Junk VS Ruike 661 You would think it was no contest right ? But no , its a draw ! Both knives are junk . Sad but true , :huh: My Ruike...

Hello, fellow lighting enthusiasts! First off, I'd like to thank the admins for their continuing hard work administering this forum and providing...

Has anyone tried both of these and can offer some thoughts on how they compare? I don't care about the USB charging, more curious about the...

How about $7.00 postage for an approx 2-year old, never used S1 Baton with rechargeable cell plus 4 approx 3-5 year old RCR123 rechargeables kept at...

While putting away the updated insurance for the car yesterday, I pulled out the car light and decided to give it a preventive maintenance...

For those of you who couldn't, or didn't, get in on the first round of M361 drop-ins, I am doing a second round. It will be very similar to the...

Hi there, I am looking to make a small backup light that uses a single 16340 battery. I am not sure what kind of LED emitter I should be using, or...

Hi everyone, my googlefu has been weak looking for this. Does anyone know of a task light that can be magnetically mounted on a milling machine that...

Has anybody successfully removed the bezel on a E20 v2 to swap the puke green SST-20 low CRI for one of its 4000k high CRI brethren? Mine is just...

Hello all. So I have been into flashlights for a while and am starting to get more active here on the sight again. I am new to the McGizmo world...

I am thinking of upgrading my older tactical flashlight, a Nitecore MH12 (1000 lumes, 232m throw, 18650 battery, 13,500 cd). I am looking for...

I’m in the process of creating a jewelry box in solid oak, where the lid of the box acts as a mirror. I’m exploring the possibility of adding LED...

We noticed some customers often asked why their XTAR chargers can’t reach the acceptable max current during charging. For example, VC2 supports 0.5A...

Hello forum members i quick question about the Xtar VC4 charger. For the owners of this charger, have you tried this? after the charger shows that...

The obsession has changed from watches to flashlights. Im here to gain info and information. Thanks for having me

It did not make me all warm and fuzzy. I had a CATAPULT V6 and am trying to upgrade from there. Looking for more throw, a blazing hot spot and...

Oh dear ! Looks like 2021 might be another disappointing knife year ( Buying Garbage ) .. Brother 1502G Lock Back 440c (?) The following is...