There is no content in this section
Hello,
I would like to buy an olight s1r ii tube.
thx
kees
Hi folks,
Somebody posted a daytime beamshot from a LEP early last year (iirc) where the beam was clearly visible miles away on the side
My apology, in advance, if this has been asked before. I searched CPF and did not find an answer; the Tenergy related information I did find was years
Last Post By: xxo Today, 01:13 PMI would like to see what some of you have come up with for display cases/shelving that is decorative and accessible. I see them here and there in the
Last Post By: Stoneking Today, 11:42 AMI would like to see what some of you have come up with for display cases/shelving that is decorative and accessible. I see them here and there in the
Last Post By: thermal guy Today, 02:29 PMSOLD Hinderer Maximus Dagger, double edge, stonewash. Upgraded with copper standoff, pivot screw, clip screw, and filler tab screw. (All original hardware
Last Post By: lightknot Today, 03:35 AMSold: Hinderer XM18 3.5” Swedged Spear, like new, in box. Stonewashed gen 6, tri-way, w/ black G10 scale. Excellent detent and smooth action on bearings.
Last Post By: lightknot Yesterday, 08:04 PMSo I was presented this KONG-12 to sell for a client. I emailed Wayne Johnson and he confirmed its one of his lights and he only really made a few of
Last Post By: bogey Yesterday, 06:55 PMWell, a few clicks and it would be toast. But getting to that point seems to be the hard part. I always thought it would be good to go low key and get
Last Post By: greenpondmike Yesterday, 12:44 PMLUMINTOP EDC02 AAA handsfree keychain light review
No Bob Ross tributes this time I promise...
Xtar FC2 Charger - Made available for review by Xtar
A) Uses USB input ( 5v 2A needed )
B) Can charge
Time to prep for wife's car service.
As above, the car has H11 (from Osram) for low, with what looks like an acorn nut (centered, probably
Above light with two lamp assemblies.
1x Lumens Factory E1-LED and 1x EO-E1R
Condition as per pictures.
Dots on the light and glass
i truly cant deal if they say i need surgery tomorow my sholuder still hurts like hell and its impoasble to move it up
raggie33 Today, 07:20 PMWish I had seen this sooner. I would've reccomended the kit you bought from CPFr YazKaz and shared how I got a glued in disk out of a clicky tailcap.
bykfixer Today, 07:18 PMKind of, sort of like me with the Weather Rock: https://en.wikipedia.org/wiki/Weather_rock
richbuff Today, 07:06 PMthe m1 cpu is mind blowing good so is mini led
raggie33 Today, 06:32 PMM61NL
M61WLL
M61N4L sst.
In that order.
I've tried a bunch and those are my favorites.
Capacitive touch is a cool idea if you can get the things that cheap. Can you post a link? Maybe we can figure out how to incorporate it into the color
DIWdiver Today, 05:44 PMYes, only the 12" version due to an array of mini-LEDS for the backlight, creating a couple thousand local dimming zones.
PhotonWrangler Today, 05:04 PMThere is more to a car that straight line.
Launch Mini Today, 04:43 PMAA Update !
I spent the entire day ( April 20 ) charging AA batteries and some AAA . I have some dedicated AA chargers and they are brutal on
My W M61 LLLL probably sees the most use in a C3 w/ tripcap.
I'm a huge M361N fan, I have a current SST-20 version and it is stellar, true
Is the 361N with the current sst20 led?
ledbetter Today, 04:19 PMRight on. It's never been easier. You can find options across big name brands, smaller lower volume brands, boutique makers, custom makers, or ordering
18650 Today, 04:04 PMI'm enjoying the heck out of them Cummins branded C logo BOBIs, especially since the rebranded Hoppy's make up for my previously feeble attempts at aiming.
Ofelas Today, 04:02 PM
What are your favorite drop ins?
Thread Starter: ledbetterSo many have been made and I’ve only had or tried a handful so I’d like to hear other opinions. Here are my top 3 not in any order:
Last Post By: bykfixer Today, 06:17 PMM30-versatility