There is no content in this section
Hello,
I would like to buy an olight s1r ii tube.
thx
kees
Hi folks,
Somebody posted a daytime beamshot from a LEP early last year (iirc) where the beam was clearly visible miles away on the side
My apology, in advance, if this has been asked before. I searched CPF and did not find an answer; the Tenergy related information I did find was years
Last Post By: xxo Today, 01:13 PMI would like to see what some of you have come up with for display cases/shelving that is decorative and accessible. I see them here and there in the
Last Post By: Stoneking Today, 11:42 AMI would like to see what some of you have come up with for display cases/shelving that is decorative and accessible. I see them here and there in the
Last Post By: thermal guy Today, 02:29 PMSOLD Hinderer Maximus Dagger, double edge, stonewash. Upgraded with copper standoff, pivot screw, clip screw, and filler tab screw. (All original hardware
Last Post By: lightknot Today, 03:35 AMSold: Hinderer XM18 3.5” Swedged Spear, like new, in box. Stonewashed gen 6, tri-way, w/ black G10 scale. Excellent detent and smooth action on bearings.
Last Post By: lightknot Yesterday, 08:04 PMSo I was presented this KONG-12 to sell for a client. I emailed Wayne Johnson and he confirmed its one of his lights and he only really made a few of
Last Post By: bogey Yesterday, 06:55 PMWell, a few clicks and it would be toast. But getting to that point seems to be the hard part. I always thought it would be good to go low key and get
Last Post By: greenpondmike Yesterday, 12:44 PMLUMINTOP EDC02 AAA handsfree keychain light review
No Bob Ross tributes this time I promise...
Xtar FC2 Charger - Made available for review by Xtar
A) Uses USB input ( 5v 2A needed )
B) Can charge
Time to prep for wife's car service.
As above, the car has H11 (from Osram) for low, with what looks like an acorn nut (centered, probably
Above light with two lamp assemblies.
1x Lumens Factory E1-LED and 1x EO-E1R
Condition as per pictures.
Dots on the light and glass
Yes, only the 12" version due to an array of mini-LEDS for the backlight, creating a couple thousand local dimming zones.
PhotonWrangler Today, 05:04 PMThere is more to a car that straight line.
Launch Mini Today, 04:43 PMAA Update !
I spent the entire day ( April 20 ) charging AA batteries and some AAA . I have some dedicated AA chargers and they are brutal on
My W M61 LLLL probably sees the most use in a C3 w/ tripcap.
I'm a huge M361N fan, I have a current SST-20 version and it is stellar, true
Is the 361N with the current sst20 led?
ledbetter Today, 04:19 PMRight on. It's never been easier. You can find options across big name brands, smaller lower volume brands, boutique makers, custom makers, or ordering
18650 Today, 04:04 PMI'm enjoying the heck out of them Cummins branded C logo BOBIs, especially since the rebranded Hoppy's make up for my previously feeble attempts at aiming.
Ofelas Today, 04:02 PMThis post ? ...
https://www.candlepowerforums.com/vb...=1#post5361112
D4V2 works just fine with 18650GA, theres no requirement to use 30Q
staticx57 Today, 02:48 PMM91BN from first run and my M60N. Both she a lot of action and both great tints. The fact that the 91 will run off of just about any battery setup is
thermal guy Today, 02:32 PMNothing like it huh?👍🏻
thermal guy Today, 02:29 PM@Mark
Do you still have any of the single cell bodies from the miscolored Natural batch?
Do you know what 18350s are compatible
Were 18650 Rotary Tubes ordered the same time as the 18500 and 18350?
Stoneking Today, 02:20 PM
What are your favorite drop ins?
Thread Starter: ledbetterSo many have been made and I’ve only had or tried a handful so I’d like to hear other opinions. Here are my top 3 not in any order:
Last Post By: dotCPF Today, 04:33 PMM30-versatility