There is no content in this section
Hi I am thinking of ordering some items for personal use, if anyone in Gothenburg or close buy is interested in some malkoff products write to me, I can
Last Post By: WarriorOfLight Today, 05:56 AM
Knife is from a Aus Company , but where is it made ?
Steel is supposedly 440c , but was not overly hard when sharpening . Bit on
I just got my first commercial LEP flashlight today. It is the Weltool W4 manufacturer rated at 1782Kcd. I tested it and got a result of 1643Kcd. That’s
Last Post By: newbie66 Today, 07:49 AMBefore I go straight to the source I’m wondering if anybody in the community is letting theirs go first.
Used and worn anodize welcome.
WTS: SUREFIRE C2 CENTURION BODY.
On offer is a new, unused and unblemished Surefire C2 Centurion square-sided flashlight body with rubber
I bought a 10,000 lumen, 80 watt (500 watt equivalent) LED bulb from Menards (Sku # 3538909)
Menard description says "It is
Does anyone know of a worthy successor to the CO30? I've found it in two stores in the US, but the shipping to EU was on average 100$, so it's not really
Last Post By: fulee9999 Yesterday, 04:02 PMHello, I'm looking for a runtime kit for my TK75. Any kit will do, but I have the 2018 version, so preferably one that matches that light. But again,
Last Post By: tokillamurderer Yesterday, 12:48 PMI received my E12R 2 days ago, seems to be decent light, easy to hold and work with and has a lot
of functions however, I am disappointed with the
I'm kind of ticked off right now. I just found out Zebralight discontinued the H502r head light. I was planning to buy that for pocket use. I wanted a
Last Post By: RagnarB Today, 08:20 AMHi, I’m looking to trade my blue aluminum Aeon mkiii for a titanium Maus or titanium Prometheus qrv2. I might consider other small titanium lights.
Last Post By: Khsaccali 03-02-2021, 06:23 PMFRAZ LABS Tiny Tank 18350 BRAND NEW from last week's drop. I got several and don't need them all.
Price: $93 + $9 shipping
Hello all. I'm new as a member but have been here many times while researching lights. I'm happy to be a member and look forward to learning. Thank
Last Post By: Silent Option 03-02-2021, 09:54 AMYou would be in 1C in my state TD.
1B included the pony express folks.
Many are saying "nah, you go ahead of me". I'm still
If pricing on the 3800 wen is close to (2) ~2000 units then I would go with the dual units. If one fails, you have a spare. Also, they are smaller and
turbodog Today, 09:59 AMShort of having a logistics expert decide how to dole out the doses I would push doses to the elderly. But at the same time I would open it wide open
turbodog Today, 09:56 AMOnly at CPF is it expected for a firefly to put out 12,000 lumens.
Poor firefly……
Last time I checked, at least where I live anyway
Did a more thorough assessment of my actual critical WFH loads and determined that so long as I don't do something absolutely nonsensical (such as run
idleprocess Today, 09:28 AMSaw 1917 a while ago - the cinematography is amazing, but the plot is hoaky and far fetched. With a halfway decent story line this could have been a great
xxo Today, 09:15 AMTeachers should certainly be a priority. But like you said Markr, many of us want to be in the front of the line.
My state has begun 1B where essential
In my photo it's all E-series, made of aluminum. E head, E tail. They're very thin. I wouldn't drive over them with a truck like I might the original
carrot Today, 09:10 AMYou can get a vaccine in NC if you've smoked 100+ cigarettes in your life. I never counted but at the age of 40 (in 2 weeks) I know I'm still under a
markr6 Today, 09:09 AM10H from off to exit simple.
Once you're out of simple, ramp to the top, then double click for full turbo.
I think a lot will proceed with caution until the gubment gives the all clear signal, some never have proceeded with caution and most will be somewhere
bykfixer Today, 08:54 AMLocally for me (Denton County TX), it appears that it's just the second wave that has crested:
Absolute peak was just shy of 16,000
here is how I do that:
first enable customization:
next go into programming presets ABC: (example shows a rotary,
Konifans, order shipped.
A1sealbeach, thank you for the update. Glad you like it.
Thermal Guy, PM sent.
Thank you for all the help. I haven't chosen a light yet, even though many good options have been suggested.
I like the Skilhunt, but I don't
Recommendation For UI
Thread Starter: :)>HDS lights really are spectacular on nearly every level. I do, however, have a recommendation that I hope is helpful and possible. I always wished I could
Last Post By: jon_slider Today, 08:39 AM