CandlePowerForums - The Front Page

Ads

Advertising Policies, Pricing and Procedures

The Front Page

There is no content in this section
Recent Threads

CH3509 1500 grit VS 180 grit
Thread Starter: old4570

The following is the opinion of the author based on actual use .

This D2 CH3509 has what I consider to be rubbish for a
Last Post By: old4570 Yesterday, 09:08 PM

SHOT show 2021?
Thread Starter: bykfixer
Will there be a SHOT show this year?

Edit: it's cancelled. Oops I did not see the previous threads.

I thought perhaps they'd
Last Post By: bykfixer Yesterday, 08:30 PM

Any info about another MH25GTvariant?
Thread Starter: Scotty321
Just purchased an MH25GT (as well as a charger, diffuser, and p20i) from the Nitecore Store (online) and am anxiously awaiting delivery. There was a
Last Post By: Scotty321 Yesterday, 08:04 PM

Looking to replace my (failed) Acebeam K60
Thread Starter: GSMGuy
Sorry, not been in in a while, divorce and general life gets in the way lol..

Anyway, gets the Acebeam K60 out to use last week and it's
Last Post By: search_and_rescue Yesterday, 10:26 PM

WTB: Convoy C8 Extension Tube
Thread Starter: NitrousZ28
Hello! Looking for two authentic Convoy C8 extension tubes to run 2x 18650 lights. I will pay however you prefer, just let me know!
Last Post By: NitrousZ28 Yesterday, 04:26 PM

Hello All
Thread Starter: NitrousZ28
What's going on guys? I just signed up to follow up on some leads on a C8 extension tube. I have been building LED flashlights for quite a few years for
Last Post By: NitrousZ28 Yesterday, 04:25 PM

Ti Recommendations (if possible?) please!
Thread Starter: DRFG2009
Hello,

New to the forum, so many apologies in advance if there is a similar thread or if this question has been covered in the past.
Last Post By: DRFG2009 Yesterday, 03:13 PM

6AA and 8AA to 2D adaptors
Thread Starter: PeteBroccolo
For the old members here, yes, much to your regret, I did NOT die or forget how to log-in; anyways, enough of the crap!
Last Post By: scout24 Yesterday, 04:49 PM

What's Everyone Buying Battery/Charger Edition
Thread Starter: cplively
I enjoy the threads about what flashlights everyone is buying, or the "recommend a light for..." sub-forum. I like to start there, because
Last Post By: aginthelaw Yesterday, 05:19 PM

Ledlenser® H7R.2 Rechargeable LED Head Torch
Thread Starter: rudenotto
I have this head torch but it is no longer working. The battery is fine. I opened it up to look at the circuit board and I can see that one of the chips
Last Post By: rudenotto Yesterday, 03:07 PM

Titanium ToolVn
Thread Starter: Rstype
Up for sale. Brand new from skylumen( Vihn)
Bought as a backup.

Titanium ToolVN

PHC( polished heated colors)
Driver
Last Post By: BitGeek Yesterday, 12:19 PM

Surefire Titan plus and Surefire L1
Thread Starter: Rstype
Up for sale

Surefire Titan Plus SPF

New in package. Never opened 3 mode light. Uses surefires Maxvision beam for a smooth
Last Post By: nbjly Yesterday, 10:26 PM

Charging methods for Rechargeable Flashlights?
Thread Starter: Rhodie
I have been using my Laptop but anybody use Power Banks and if so, can you make recommendations? Thanks.

Dave
Last Post By: Rhodie Yesterday, 07:57 PM

Herbertz 420 put to the rope
Thread Starter: old4570

I cut rope , as long as the knife cuts paper against the grain .

420 stainless steel . 180 grit diamond cut edge .
Last Post By: old4570 Yesterday, 01:23 AM

whats up with drop test?
Thread Starter: raggie33
i see my flashlight is good for 1 meter drops. but on what surface?
Last Post By: richbuff Yesterday, 03:04 PM

Recent Forum Posts
Re: Any Lights that take Multiple 14500 Batteries?

Ditto the recommendation of the Fenix LD42 (4xAA). Also, the Fenix E25UE (Ultimate Edition) allows the use of 2xAA or 2x14500 cells (for a claimed 1000
DaveTheDude Today, 12:05 AM

Re: Maratac 26650 / First Impressions.

Vermiform...I'm not experienced enough with the kind of issue you reported to offer any repair guidance (thankfully, mine has not been abruptly introduced
DaveTheDude Yesterday, 11:53 PM

Re: Lumens Factory Pineapples

Not really. Especially not in black HA with an unshrouded switch. What about LF doing the Z58/59 with a McClicky?
Owen Yesterday, 11:51 PM

Re: What was the last LED light you purchased and why?

JB RRT-01 2020 version... to go with my 2019 version. I like the the extender tube to run 18500 (which is my current config) and 18650.
LogansRun Yesterday, 11:46 PM

Re: Surefire Titan plus and Surefire L1

Back up on the Titan please -
nbjly Yesterday, 10:26 PM

Re: Looking to replace my (failed) Acebeam K60

Fenix LR35R.
search_and_rescue Yesterday, 10:26 PM

Re: HDS Systems #23

2xAA Clicky with a Zebralight clip until I throw down the cheddar for another Prometheus clip:

JohnSmith Yesterday, 10:22 PM

Re: Xtar VC4 Charging problem

Thats a good point about the multimeter. Im thinking if the reading is 1.2v there is still a fair bit of fluctuation. What i mean is that even if it reads
Spudnuts Yesterday, 10:20 PM

Re: AND THE OFFICIAL THREAD KILLER IS .....

Lol, I just thought I'd post something goofy. I used to say that to the truck drivers down on channel 19. My regular handle was redneck, but I said goofy
greenpondmike Yesterday, 10:09 PM

Re: Surefire M3LT KX9T: Modding Options?

In terms of body, you could try M6 or bored M4 for greater capacity. That will make it another light though
michaex Yesterday, 09:47 PM

Re: A few Arc goodies

Very welcome brother. Thank you for the new addition to my meager ARC collection.
knfmkr Yesterday, 09:44 PM

Re: Music to the Marrow (To What Are You Listening?)

Hey xxo, glad you liked that chicken in black. I hope all my posting didn't kill the thread- I just wanted to share some songs, but I think it got out
greenpondmike Yesterday, 09:40 PM
Re: What lights do you consider the most epic or influential on your hobby

Sorry, my list is too long!

Mag-light 2xAA in the early 80’s. Spare bulb in the tail, spot to flood, & great looking! Loved those!!
Fenix
Outdoorsman5 Yesterday, 09:39 PM
CH3509 1500 grit VS 180 grit

The following is the opinion of the author based on actual use .

This D2 CH3509 has what I consider to be rubbish for a
old4570 Yesterday, 09:08 PM

Re: A few Arc goodies

Much thanks for the smooth transaction and quick payment. #1 is sold.
808vudoo Yesterday, 09:05 PM

Ads

The Front Page

Recent Threads

Recent Forum Posts