I need the clear glass lens (4.5") diameter. Thanks for any help locating one. I'm happy to send a photo.
Joe
Hello from Redondo Beach!
Happened to find my self as a owner of a surefire "the Beast" which after some research brought me to
Looking for 2 of these bezels.
No dents, dings or scratches plz.
Message me with any offers, thanks
Hi all,
I had a quick search, but didn't find much about this specifically... I've heard mention of people using shorter unprotected cells
Hi all,
Literally just received this Okluma aluminum DC1 in the mail today, but regrettably have to put it up for sale as money needs to
I only have two. The same two carried over from last year. Perhaps the same two for 2022 as well
1. XeRay XV-LX70
2. Polarion
I am looking for a smallish thrower that will not spill out and white out the view through my rifle scope when using to ward off critters at night. Single
Last Post By: KITROBASKIN Today, 09:29 PMThe last lights I bought and liked have basically just had an on/off switch and a dimmer: Nitecore's SRT3, SRT6, SRT9, and HC90. But Nitecore's been discontinuing
Last Post By: joshk Today, 11:03 PMI have the plain M3. Other than the LED any other differences from mine? Is it collectible and what would be someone's estimation of the value of a new
Last Post By: BrightestBulb Yesterday, 12:58 PMHello everyone… Today we will see the Olight Marauder 2: powerful barrel torch with double beam (flood and throw) and with a maximum power of 14000 lumens.
Last Post By: lock Yesterday, 09:04 AMKeeppower 18650 3200mAh P1832U (Blue-white) 2020
Official specifications:
I posted here: https://budgetlightforum.com/node/76235
there are 5 left right now, just reply to the post there, PM me your address and I'll
Thrower: A light with a beam profile which concentrates most of the output into a center "hot spot", to send more intensity far down range
Last Post By: Stress_Test Today, 11:04 PMTwo parallel 18650 cells have about 7000mAh while single 26650 cell has about 5200mAh
BTW, 26xxx cells won't fit in unbored "C" bodies.
One other forgotten thing is lights are typically rated at OTF lumens (out the front) vs Emitter lumens. I've read that from about 25% to 35% of the emitter
Lynx_Arc Today, 11:31 PMI've actually done that, but it wasn't by choice!
One week without power after major storms blew through.
I usually use a Seiko 5, mine's the speed-racer dial with a polished case. Currently on a raggedy NATO strap.
Still going strong after 9 years.
Possible to use 3 cells of 66.7mm long in 4x26500 bodies.
Some 26650 cells are about this length.
Also possible to use 3 cells of
Some fun ideas. I would enjoy a "there is no light switch" challenge. Use only your flashlights for a week. For everything. Everywhere. It might
parang Today, 11:17 PMWell sort of... the whack-a-palm description normally means you have to do that to make the light work again. The TIR/Mag combo doesn't quit working
Stress_Test Today, 11:04 PMTakes some appreciable heft to do that without active thermals, which I've never heard praised as being highly effective. My D4 is good for single-digit
idleprocess Today, 10:55 PMThis is correct in that most modern emitters on 16mm MCPCBs will work. I generally don't recommend multiple cells however (as cell charge imbalance can
TheFraz Today, 10:28 PMI'm joining the mag club for this one with a 2d Ml300. So far so good...
CanAm Today, 10:16 PMalpg88, thanks for the reply! I'm not a techie though, so will have to live with the lowered output. Unfortunate, since this is not a cheap throwaway
flashfan Today, 10:03 PM
Yeah, you got a point there. It's unfeasible to expect a response time of less than an hour. The narration must have made my brain think
Staff here get grief if we leave em up, and grief if we take em down
Can't win, eh ?
WTB: Oveready Boss Body
Thread Starter: rtrylandISO: 70 or 35 BOSS body. Preferably AL, but will entertain other materials.
Last Post By: rtryland Today, 06:50 PM