Looking for a bezel to run with my FM 18500 body. Can’t justify shelling out for a fancy HA FM C head but maybe I can for your well used Z44?
Last Post By: Buck91 Today, 12:09 AMMore lights for sale that don’t see pocket time or I have multiples of. All prices include USPS first class shipping within the U.S and payment method
Last Post By: GrizzlyAdams Yesterday, 10:16 PMHello all,
I am a home inspector and have been using Zebralight flashlights for years. I wanted a really powerful light for attics and crawlspaces
Have a old 3d cell maglite (switch is gone), want to run a external switch and battery. So can I just run a positive wire from the brass button on the
Last Post By: greenpondmike Yesterday, 09:38 PMLooking for a black bezel, let me know how much as well.
Last Post By: stang1911 Yesterday, 05:48 PMI needed a new EDC light for my working bag (nowadays I rarely need a lot of light, I have at least a bigger light in my car, and an I1 as keychain on
Last Post By: Budda Yesterday, 03:21 PMI received the T4K from Nitecore for the review.
The T4K is a small EDC-Keychain light with a quick release system, that uses 4 CREE XP-L2
Currently looking for a lenslight mini titanium, not after a specific version but my top choice would be with the crenulated bezel and tail. I will even
Last Post By: Nsjenner Yesterday, 08:38 AM Hello everyone...
today we will see the Lumintop GT Nano:
a very small thrower flashlight with 10180 battery.
Here the link of
Not sure if this is the best forum section to post this. If an admin thinks it should be elsewhere - please move the topic.
I wonder what
Looking for a Surefire Fury tactical tailcap, no click just press/momentary and twist for constant.
Also looking for two of the
Greetings to the Lumen Leigon! (Is that what we are? Is there a term for us, collectively? Are we <gasp> the Illuminati? )
As I've
WTB Olights:
Looking for a Maglite 6C; BNIB preferred.
Last Post By: Yates Yesterday, 09:06 PMI`m not sure about the friends/family thing because I`v never had one outside the UK, but anything from the West (Canada, USA) I get charged regardless
Katherine Alicia Today, 02:27 AMThanks.
Thanks. Still considering what to get.
New addition after this last week of machining is Tiny Nugget in 21700 . It is coming real close to the ideal worklight imo. The large capacity in
This H3R headlight can suppot turbo 1000lm, runtime 2.5h; You can choose 6 lighting modes (Turbo/High/Mid/Low/Moonlight/SOS) for different needs.
How about your testing results? Hope it goes fine. And there is an article about : How does a charger know Ni-MH/Ni-CD or Li-ion batteries get fully charged?
XTAR Light Today, 01:14 AMUntil you find one, try 10W G4 bulb in one of these.
fivemega Today, 12:23 AMLooking for a bezel to run with my FM 18500 body. Can’t justify shelling out for a fancy HA FM C head but maybe I can for your well used Z44?
Buck91 Today, 12:09 AMmaglite.eu opened recently, nice website but no buying options yet.
I find it interesting that the ML300L 4D is 1002 lumen, while the ML300L
Asked and answered.. Thanks Jon!
knucklegary Yesterday, 11:13 PMIs it the Acrylite FF P-99 Acrylic Lens?
No light transmission numbers on the page, I wonder what the reduction is.
I cant explain why these three other people are getting different data than you:
the 2012 has a drain of 30uA
the 2019 has a drain of 27uA
If the light didn't have a reverse protection circuit you might have fried the light instead of the batteries. I hope not though....
greenpondmike Yesterday, 10:30 PMSee Post #705
discoverEDC Yesterday, 10:30 PMThanks 4 the reply. I was afraid you'd say what you said, when you said what you said. I see the breaking of the glass as a real problem I'd prefer to
Luminesce Yesterday, 10:30 PM
WTB: Weltool W4
Thread Starter: morse codeIf you have any of these, please dm me
Last Post By: morse code Today, 02:08 AM