Hello,
I would like to buy an olight s1r ii tube.
thx
kees
Hi folks,
Somebody posted a daytime beamshot from a LEP early last year (iirc) where the beam was clearly visible miles away on the side
My apology, in advance, if this has been asked before. I searched CPF and did not find an answer; the Tenergy related information I did find was years
Last Post By: xxo Today, 01:13 PMI would like to see what some of you have come up with for display cases/shelving that is decorative and accessible. I see them here and there in the
Last Post By: Stoneking Today, 11:42 AMI would like to see what some of you have come up with for display cases/shelving that is decorative and accessible. I see them here and there in the
Last Post By: thermal guy Today, 02:29 PMSOLD Hinderer Maximus Dagger, double edge, stonewash. Upgraded with copper standoff, pivot screw, clip screw, and filler tab screw. (All original hardware
Last Post By: lightknot Today, 03:35 AMSold: Hinderer XM18 3.5” Swedged Spear, like new, in box. Stonewashed gen 6, tri-way, w/ black G10 scale. Excellent detent and smooth action on bearings.
Last Post By: lightknot Yesterday, 08:04 PMSo I was presented this KONG-12 to sell for a client. I emailed Wayne Johnson and he confirmed its one of his lights and he only really made a few of
Last Post By: bogey Yesterday, 06:55 PMWell, a few clicks and it would be toast. But getting to that point seems to be the hard part. I always thought it would be good to go low key and get
Last Post By: greenpondmike Yesterday, 12:44 PMLUMINTOP EDC02 AAA handsfree keychain light review
No Bob Ross tributes this time I promise...
Xtar FC2 Charger - Made available for review by Xtar
A) Uses USB input ( 5v 2A needed )
B) Can charge
Time to prep for wife's car service.
As above, the car has H11 (from Osram) for low, with what looks like an acorn nut (centered, probably
Above light with two lamp assemblies.
1x Lumens Factory E1-LED and 1x EO-E1R
Condition as per pictures.
Dots on the light and glass
D4V2 works just fine with 18650GA, theres no requirement to use 30Q
staticx57 Today, 02:48 PMM91BN from first run and my M60N. Both she a lot of action and both great tints. The fact that the 91 will run off of just about any battery setup is
thermal guy Today, 02:32 PMNothing like it huh?👍🏻
thermal guy Today, 02:29 PMWere 18650 Rotary Tubes ordered the same time as the 18500 and 18350?
Stoneking Today, 02:20 PMWith a capital "A"!
Owen Today, 02:05 PMMy eyeballs.
Hit on switch and squint, yup it's bright.
Blue looks gray, dratz CRI sucks.
See my neighbor 3 doors down squinting,
M30WF • Excellent general purpose beam, and very useful working voltage range.
M60W-MCE • Always liked this emitter, and having one in a
We’re you airborne sir?
thermal guy Today, 01:33 PMI'm happy to assemble a kit if I know what parts I need and someone could do me a simple circuit diagram.
Obviously I'd need a
I have a few tenergy C and D cell centuras, they seem OK, not as good as eneloops for self discharge but not horrible like old high self discharge NiMH's.
xxo Today, 01:13 PMIf anyone is wondering about this/stumbles onto this thread down the line -
I installed a new switch picked up from everyone's favorite
Since I only maintain a small selection of users, it's rare for more than 3 of them to actually be in there at any given time, but I've got a nice barrister
Owen Today, 12:39 PMJust bought a pack of Tronic ECO 2400mah AA cells from Lidl for £2.99 for a pack of 4
The battery`s are dated 12/2020
I did
What are your favorite drop ins?
Thread Starter: ledbetterSo many have been made and I’ve only had or tried a handful so I’d like to hear other opinions. Here are my top 3 not in any order:
Last Post By: troutpool Today, 03:45 PMM30-versatility